| Description | Description
TAB-ECP63 electric press is a suitable open type of crank press featuring a left and right open type machine body (i.e., a C-shaped machine body). Its steel plate welded body has a high shock-absorbing performance. Its novel overall design gives the machine an elegant appearance. Its throat has a certain depth. The compact structure makes the use convenient and operation safe. The punch press is equipped with a turn-key rigid clutch, a cam band brake, and a press-down type safety device. Its working table is open on three sides, so the mold loading and unloading, and operation are convenient. The punch press is widely used because it provides good conditions for mechanization and automation. And as the main equipment for plate punching production, the punch press can be used for punching holes, blanking, trimming, bending, shallow stretching, and forming. | Description
SPL356 Light lathe this lathe machine is with a swing of 356mm for light industrial, and the motor power is 1.5kw powerful. The foot brake is a rapid braking type.
Features:
- Hardened and ground bed ways engineered from high-grade castings.
- Removable gap is provided for larger diameter work and easy operating gear box can be various feeds and thread cutting.
- 8 speeds all geared headstock.
- Cross and longitudinal interlocking feed, enough safety
- All machines pass the checklist of machine precision before shipment
- Including switch for test running
- There is an extra safety switch that shuts down the machine automatically for changing the belt or gear for threading cutting.
- Jog button for easy gear engagement and inching spindle.
| Description
SP5216C-II drill press belongs to one of our most economical drill press
Features:
1. Very good quality
2. Fast-opened or locked pulley cover;
3. Variable speed system-pagoda pulley;
4. Three-spoke feed handle and external depth stop;
5. Control panel for easy operation;
6. Continuous-duty motor;
7. Chuck guard for safety;
8. Rack pinion for accurate height adjustments;
10. Swivel knob;
11. Study cast iron base. | Description
SP5216A-I drill press is one of our most economical drill presses. it is small and delicate in design
Features:
- Electromagnetic switch
- Heating protector in the motor
- Micro-switch in the belt cover ensure safety
- Processing material: metal, iron, and copper
- Precision, convenient operation, and improved work efficiency.
- Environmental protection products.
| Description
The TAB L-300 light lathe gets the job done efficiently, and affordably. This customized lathe machine from Altabsh has a modern, tested design, top installations, and safety regulations. Which can do most small works easily and fast. for usage in the light industry small workshops and central maintenance workshops for companies.
With a 300mm swing, a 1000mm distance between centers, a wide range of speed feeds, and screw-cutting options, this lathe machine has an advantage over its competitors.
Features:
- Hardened and ground bed ways engineered from high-grade castings.
- Removable gap is provided for larger diameter work and easy operating gear box can be various feeds and thread cutting.
- 8 speeds all geared headstock.
- Cross and longitudinal interlocking feed, enough safety
- All machines must pass the checklist of machine precision before shipment
- Including switch for test running
- There is an extra safety switch that automatically shuts down the machine for changing the belt or gear for threading cutting.
- Jog button for easy gear engagement and inching spindle.
| Description:
The TAB L-330 light lathe gets the job done efficiently, and affordably.
This customized lathe machine from Altabsh has a modern, tested design, top installations, and safety regulations. Which can do most small works easily and fast. for usage in the light industry small workshops and central maintenance workshops for companies.
With a 330mm swing, a 1000mm distance between centers, a wide range of speed feeds, and screw-cutting options, this lathe machine has an advantage over its competitors.
Features:
- Hardened and ground bed ways engineered from high-grade castings.
- Removable gap is provided for larger diameter work and easy operating gear box can be various feeds and thread cutting.
- 8 speeds all geared headstock.
- Cross and longitudinal interlocking feed, enough safety
- All machines must pass the checklist of machine precision before shipment
- Including switch for test running
- There is an extra safety switch that automatically shuts down the machine for changing the belt or gear for threading cutting.
- Jog button for easy gear engagement and inching spindle.
|
| Content |
| Model |
Unit |
TAB-ECP63 |
| Nominal Pressure |
kn |
630 |
| Travel of slip block |
mm |
100 |
| Frequency of travel |
Frequency/minute |
50 |
| Enclosed height |
mm |
70 |
| Maximum adjustment of enclosed height |
mm |
80 |
| Distance from center of slip block to press body |
mm |
230 |
| Size of shank holes diameter |
mm |
50 |
| Bolster Surface |
Front to Rear |
mm |
450 |
| Left to Right |
mm |
700 |
| Size of shank holes depth |
mm |
70 |
| Distance between columns |
mm |
370 |
| Mold Height |
mm |
220 |
| Motor Power |
kw |
5.5 |
| Overall Dimensions |
F.R. |
mm |
1800 |
| L.R. |
mm |
1500 |
| Height |
mm |
2650 |
|
| model |
SPL356 |
| Max. Swing over bed |
356mm |
| Max swing over cross slide |
210mm |
| Max. Swing over gap |
508 mm |
| Effective length of gap |
180mm |
| Distance between centers |
1500mm |
| Width of bed |
260mm |
| Spindle bore |
52mm |
| Spindle nose |
ISO- D4 |
| Spindle taper |
MT5 |
| spindle speed |
(12 steps) 50-2000rpm |
| Range of longitudinal feed |
37kinds 0.043-0.653mm/rev |
| Range of cross feed |
37kinds 0.024-0.359mm/rev |
| Range of Metric thread |
37kinds 0.4-7mm/rev |
| Range of Imperial thread |
28kinds 4-56inch |
| Dia. of main screw |
22mm |
| Pitch of main screw |
4mm or 8T.P.I |
| Dia. of tailstock sleeve |
45mm |
| Taper of tailstock sleeve |
MT3 |
| Max. travel of tailstock |
120mm |
| Main driver power |
1.5 kW |
| Coolant pump motor |
40W |
| Package size(L*W*H) |
190×75×150cm |
| Weight(N.W/G.W) |
1350/1650kg |
|
| Model |
SP5216C-II |
| Drilling capacity |
Ø16mm (5/8") |
| Motor power |
375/450/550W |
| Chuck Capacity |
3-16mm |
| Spindle stroke |
85mm |
| Class Of Speed |
16 |
| Speed 60Hz |
180~2770/220~3320 R.P.M |
| Spindle taper |
MT2 |
| Auto-feeding step of worktable |
180mm |
| Max. distance from spindle end to surface of table |
685mm |
| Max. distance from spindle end to surface of base |
1175mm |
| Swing |
360mm |
| Table size |
290×290mm |
| Base Size |
460×270mm |
| Column Diameter |
Ø72mm |
| Height |
1600mm |
| N.W./G.W. |
66/70kg |
|
| Model |
SP5216A-I |
| Drilling capacity |
Ø16mm (5/8") |
| Motor power |
375/450/550W |
| Chuck Capacity |
3-16mm |
| Spindle stroke |
60mm |
| Class Of Speed |
5 |
| Speed 60Hz |
620~2620/740~3140 R.P.M |
| Spindle taper |
B16 |
| Auto-feeding step of worktable |
130mm |
| Max. distance from spindle end to surface of table |
400mm |
| Max. distance from spindle end to surface of base |
515mm |
| Swing |
260mm |
| Table size |
190×190mm |
| Base Size |
340×210mm |
| Column Diameter |
Ø58mm |
| Height |
840mm |
| N.W./G.W. |
28/30kg |
|
| model |
TAB L-300 |
| Max. Swing over bed: |
300 mm |
| Max. Swing over cross slide: |
180 mm |
| Max. Swing over gap |
43 mm |
| Distance between centers: |
1000 mm |
| Spindle bore diameter: |
38 mm |
| Taper of spindle bore: |
MT.5 |
| Range of spindle Speed |
65~1400 (65-1810) rpm |
| Range of Longitudinal feeds |
0.079~1.291mm/rev |
| Range of cross feeds |
0.017~0.276 mm/rev |
| Range of Metric threads |
0.4~7 mm |
| Range of inch threads |
4-60TPI |
| Max. Travel of tailstock quill |
100 mm |
| Taper of tailstock quill bore |
MT.3 |
| Power of main drive motor |
1.5kW |
| Packing size |
1940×750×1400 mm |
| Net weight |
620 kg |
| Gross weight |
670 kg |
|
| model |
TAB L-330 |
| Swing over bed |
330mm |
| Swing over cross slide |
198mm |
| Swing in gap diameter |
476mm |
| Swing in length of gap |
210mm |
| Center height |
166mm |
| Distance between Center |
1000mm |
| Bed width |
187mm |
| Spindle bore |
38mm |
| Spindle nose |
D1-4" or A2-4" |
| Taper in sleeve |
NO.3 Morse |
| Speeds number |
8 |
| Speeds range |
70-2000r.p.m.or 35-2000r.p.m.(2 speed motor) |
| Cross slide travel |
118mm |
| Compound rest travel |
68mm |
| Lead screw thread |
8T.P.I. or 3mm pitch |
| Feed rod diameter |
19mm |
| Cutting tool max section |
16mm×16mm |
| Threads imperial pitches |
36 Nos.8-112 T.P.I. or (34 Nos.4-56T.P.I) |
| Threads metric pitches |
28 Nos.0.2-5mm pitch or (26 Nos.0.4-7mm pitch) |
| Longitudinal feeds imperial |
36 Nos.0.0019-0.0273"/Rev.or (32 Nos.0.002-0.548"/Rev) |
| Longitudinal feeds metric |
36 Nos.0.050-0.696"/Rev.or (32 Nos.0.052-0.392mm/Rev) |
| Cross feeds imperial |
36 Nos.0.0006-0.0094"/Rev.or (32 Nos.0.007-0.0187"/Rev) |
| Cross feeds metric |
36 Nos.0.013-0.188"/Rev.or (32 Nos.0.014-0.380mm/Rev) |
| Quill diameter |
32mm(1-1/4") |
| Quill travel |
100mm(3-15/16") |
| Quill taper |
NO.3 morse |
| main motor |
1.5KW |
| Packing size |
1950×750×1510mm |
| Net weight |
640kgs |
| Gross weight |
690kgs |
|
