| Description | Descriptions:
Heavy-duty arbor press designed for garage and workshop. These arbor presses are small and hand-operated, typically used to perform small tasks, such as staking, riveting, installing, configuring, and removing bearings and other press fit work. | Descriptions
Premium grade portable electric crankshaft polisher
balanced for less fatigue.
Motor power: 480w 220v
RPM: 11000r/min
Diameter: 100mm
Dimension: 990x460x260mm
weight:6.5kg
| Descriptions:
Vacuum tester is a portable device for measuring the vacuum which is mainly used to test the seal level of the engine valve and valve seat before or after rebuilding the cylinder head. It can be also applied to test other vacuum purposes. | Descriptions:
Heavy-duty arbor press designed for garage and workshop. These arbor presses are small and hand-operated, typically used to perform small tasks, such as staking, riveting, installing, configuring, and removing bearings and other press fit work. | Descriptions
This grinder has special equipment for regrinding rod big end composition surface.
Features:
- Diameter of the grinding wheel: 150mm
- Dimension of revolution worktable: 120mm× 180mm (long× Wide)
- Max moving of revolution worktable: 22mm
| Descriptions
- The universal dividing heads models UDH80, UDH100, UDH125, and UDH160 respectively have the center height of 80mm, 100mm, 125mm, and 160mm and are the most important attachment for milling machines. With the help of the dividing head, the workpiece held between centers, or on a chuck can be rotated to any angle as desired and the periphery of a workpiece can be divided into any number of divisions equally. By means of all kinds of cutters, the dividing head can also help the milling machine to perform the milling operation for flute, spur gear, spiral gear, spiral flute, Archimedean cam, helical flute, etc.
- The dividing head is equipped with a face plate and then can be mounted onto the spindle nose. The workpiece can be mounted on the face plate; thus the cutting can be carried out from all sides of the workpiece. UDH125 and UDH160 models dividing heads are designed with improved shafts for supporting heavy loads.
- The universal dividing heads of models UDH100, UDH125, and UDH160 are in the same structures as the UDH80 model dividing heads, and the operation handle is located on the left.
|
| Content |
| Model |
Arbor Press 3TON |
| Automation Type |
Manual |
| Working Height |
570 mm |
| Capacity |
3 Ton |
| Dimensions |
46 x 19.7 x 57 cm |
| Model No |
3 TON |
| Weight |
42 Kilograms |
| |
| Model |
Vaccum Tester |
| Power supply |
220V/1PH |
| Power |
100W |
| Output |
60HZ-45L/Min |
| Vacuum Level |
900mbar |
|
| Model |
Arbor Press 2TON |
| Automation Type |
Manual |
| Working Height |
440 mm |
| Capacity |
2 Ton |
| Dimensions |
44 x 16.4 x 39.2 cm; |
| Model No |
2 TON |
| Weight |
28 Kilograms |
| |
| Model |
UDH80 |
UDH100 |
UDH125 |
UDH160 |
| Center height (Millimeter) |
80 |
100 |
125 |
160 |
| Morse taper of spindle (Morse) |
3 |
3 |
4 |
4 |
| Diameter of spindle (Millimeter) |
36.541 |
41.275 |
53.975 |
53.975 |
| Worm wheel transmit proportion |
01:40 |
01:40 |
01:40 |
01:40 |
| The angular of spindle rises and falls relative to horizontal |
>95:5 |
>95:5 |
>95:5 |
>95:5 |
| Position width (Millimeter) |
14 |
14 |
18 |
18 |
| Dividing accuration (Minute) |
60 |
45 |
45 |
45 |
| Gross weight (Kg) |
40 |
80 |
132 |
140 |
|
