Cylinder Head Pressure Tester Machines مكينة فحص رأس السلندر

Description:

Easy and efficient pressure test of the cylinder head and cylinder block coolant circuits.
Quick and easy clamping system allowing tests at a pressure of 4 to 5 bar.

Features:

360° Electric powered roll-over fixture.
Hydraulic cradle lift for easy positioning of heavy cylinder heads.
Stainless steel tank with heat barrier.
Heating elements: two changeover 4500 Watts elements.
Water level control.
Electronic adjustable thermostat.
Heating programmer: daily or weekly.

Export Catalog

Get a Price

Description

Description

Model	TPT 1600	TPT 1600L
Maximum length (mm)	1300 mm	1350 mm
Maximum width (mm)	400 mm	425 mm
Maximum height (mm)	300 mm	300 mm
Capacity of stainless-steel tank	500liters	550liters
Heating elements (kW)	2×4.5 kW	2×4.5 kW
Hydraulic hoist (kW)	0.55 kW	0.55 kW
Gear-motor (kW)	0.25 kW	0.25 kW
Rotational speed (tr/min)	4 tr/min	4 tr/min
Up and down travel time (mm in 10sec)	600mm	600mm
Thermostat (°C )	14-70 °C	14-70 °C
Power supply	3 PHASE 380V-AC-60Hz	3PHASE 380V-AC-60Hz
Net weight approx. (kg)	400	480
Overall dimension:
Length(mm)	2000 mm	2100 mm
Width (mm)	1050 mm	1050 mm
Height (mm)	1700 mm	1700 mm

Quick Comparison

Settings Cylinder Head Pressure Tester Machines مكينة فحص رأس السلندر remove Pipe Bending Machine HRBM40HV تناية مواسير remove Pipe Bending Machine HRBM50HV تناية مواسير remove Mechanical Eccentric Press Machine TAB-ECP25 مكبس سنتريك ميكانيكي remove Pipe Bending Machine RBM40HV تناية مواسير remove Conventional Lathe Machine TAB-LM770 مخرطة معادن remove

Name Cylinder Head Pressure Tester Machines مكينة فحص رأس السلندر remove Pipe Bending Machine HRBM40HV تناية مواسير remove Pipe Bending Machine HRBM50HV تناية مواسير remove Mechanical Eccentric Press Machine TAB-ECP25 مكبس سنتريك ميكانيكي remove Pipe Bending Machine RBM40HV تناية مواسير remove Conventional Lathe Machine TAB-LM770 مخرطة معادن remove

Image

SKU

Rating

(No)

Price

Stock

Availability

Add to cart

Description

Description: Easy and efficient pressure test of the cylinder head and cylinder block coolant circuits. Quick and easy clamping system allowing tests at a pressure of 4 to 5 bar. Features:

360° Electric powered roll-over fixture.
Hydraulic cradle lift for easy positioning of heavy cylinder heads.
Stainless steel tank with heat barrier.
Heating elements: two changeover 4500 Watts elements.
Water level control.
Electronic adjustable thermostat.
Heating programmer: daily or weekly.

Description Hydraulic round bending machine with hydraulic motor both Vertical and horizontal bending Features:

Horizontal and vertical operation
With the standard foot pedal
Special cast frame+
Shafts are hardened with special steel material
Rollers are special steel material hardened and grounded
Gears Milled with full material
HRBM40HV with hydraulic control

Description Hydraulic round bending machine with hydraulic motor both Vertical and horizontal bending Features:

Horizontal and vertical operation
With the standard foot pedal
Special cast frame+
Shafts are hardened with special steel material
Rollers are special steel material hardened and grounded
Gears Milled with full material
HRBM50HV with hydraulic control

Description TAB-ECP25 eccentric press is a suitable open type of crank press featuring a left and right open type machine body (i.e., a C-shaped machine body). Its steel plate welded body has a high shock-absorbing performance. Its novel overall design gives the machine an elegant appearance. Its throat has a certain depth. The compact structure makes the use convenient and operation safe. The punch press is equipped with a turn-key rigid clutch, a cam band brake, and a press-down type safety device. Its working table is open on three sides, so the mold loading and unloading, and operation are convenient. The punch press is widely used because it provides good conditions for mechanization and automation. And as the main equipment for plate punching production, the punch press can be used for punching holes, blanking, trimming, bending, shallow stretching, and forming.

Descriptions Round bending machine both Vertical and horizontal bending Features:

Horizontal and vertical operation
With standard foot pedal
Special cast frame+
Shafts are hardened with special steel material
Rollers are special steel material hardened and grounded
Gears Milled with full material

Description: TAB LM770 Conventional lathe is with a swing of 770mm for Medium industrial, the motor power is 7.5kw. Features:

Precision ground and hardened bed ways.
The spindle is supported with precision roller bearings. The spindle system is high in rigidity and accuracy.
An automatic stopping device is used to realize an automatic stop for machining a workpiece of a certain length.
Easy operating speed change levers.
Removable gap is provided for more significant diameter work.

Content

Model	TPT 1600	TPT 1600L
Maximum length (mm)	1300 mm	1350 mm
Maximum width (mm)	400 mm	425 mm
Maximum height (mm)	300 mm	300 mm
Capacity of stainless-steel tank	500liters	550liters
Heating elements (kW)	2x4.5 kW	2x4.5 kW
Hydraulic hoist (kW)	0.55 kW	0.55 kW
Gear-motor (kW)	0.25 kW	0.25 kW
Rotational speed (tr/min)	4 tr/min	4 tr/min
Up and down travel time (mm in 10sec)	600mm	600mm
Thermostat (°C )	14-70 °C	14-70 °C
Power supply	3 PHASE 380V-AC-60Hz	3PHASE 380V-AC-60Hz
Net weight approx. (kg)	400	480
Overall dimension:
Length(mm)	2000 mm	2100 mm
Width (mm)	1050 mm	1050 mm
Height (mm)	1700 mm	1700 mm

Model	HRBM40HV
Motor power	1.5 kW
Leading roller speed	9.3 r/min
Roller shaft diameter	40 mm
Dimensions machine	1340×930×1850 mm
Net weight	490 kg

Model	HRBM50HV
Motor power	2,2 kW
Leading roller speed	13 r/min
Roller shaft diameter	50 mm
Dimensions machine	1500×950×1340 mm
Net weight	515 kg

Model	Unit		TAB-ECP25
Nominal Pressure	kn		250
Travel of slip block	mm		70
Frequency of travel	Frequency/minute		40
Enclosed height	mm		70
Maximum adjustment of enclosed height	mm		60
Distance from center of slip block to press body	mm		180
Size of shank holes diameter	mm		40
Bolster Surface	Front to Rear	mm	520
Bolster Surface	Left to Right	mm	330
Size of shank holes depth	mm		60
Distance between Uprights	mm		160
Thickness of plate of workbench	mm		170
Motor Power	kw		2.2
Overall Dimension	F.B.	mm	910
L.R.	mm		700
Height	mm		1800

model	Pipe Bending Machine RBM40HV
Motor power	1.5 kW
Leading roller speed	9.3 r/min
Roller shaft diameter	40 mm
Dimensions machine	1400×950×1340 mm
Net weight	425 kg

MODEL	TAB-LM770
CAPACITY
Max. swing over bed	770mm
Max. swing over carriage	575mm
Max. swing over gap	1050mm
Bed width	405mm
Effective length of gap	230mm
Distance between centers	1000/1500/2000/3000mm
Max turning length	830/1330/1830/2830mm
SPINDLE
Spindle nose	D8
Spindle bore	105mm
Taper bore of spindle	113mm 1:20
Steps of spindle speed	12
Range of spindle speed	36~1600rpm
FEED
Range of longitudinal feeds	0.063~2.52 (0.023"~0.937")mm
Range of cross feeds	0.027~1.07(0.010"~0.404")mm
RAPID TRAVEL
Longitudinal	4500mm/min
Cross	1900mm/min
THREAD RANGE/ NUMBER
Metric pitch threads	1~14mm/ 22
Whit-worth threads	28~2TPI/ 26

Weight N/A N/A N/A N/A N/A N/A

Dimensions N/A N/A N/A N/A N/A N/A

Additional information