| Description | Description
SP2121 560×3000mm engine lathe machine can be with spindle speed 12 steps or variable speed.
It is an affordable universal lathe machine.
This manual lathe machine could be an 80mm or 103mm spindle bore.
Now we have developed a new specification for the lathe machine with an automatic lubrication system.
Features:
- The spindle bore is supported with precision roller bearings.
- A removable gap is provided for larger diameter work and easy operating gear box can be various feeds and thread cutting.
- An overload safety device is designed on the apron.
- Carriage rapid feed with clutch is available.
- Easy operating speed change levers
| Descriptions
Round bending machine both Vertical and horizontal bending
Features:
- Horizontal and vertical operation
- With standard foot pedal
- Special cast frame+
- Shafts are hardened with special steel material
- Rollers are special steel material hardened and grounded
- Gears Milled with full material
| Description
This SP3103 machine is a step-less timing vertical drilling machine with a wide belt, light in weight small in volume easy to operate, safe, and reliable.
It is a universal machine that could be widely used for small and middle-sized workpieces or drilling spot facing, reaming, tapping, etc.
And it also could equip many kinds of accessories, to extend machining function and usage area.
Digital speeds screen installed
These machines are suitable for machining workshops, maintenance workshops, and mini-type workshops. | Description
The Bending machine adopts the sliding guide rail, and tension spring using sliding stationary, reducing the operating force by two-thirds, the bending, machine can be equipped with a pressure loading device, high shearing quality, and lightweight, mobile convenience features. It is widely used in the sheet metal industry, the machine tool made of high alloy tool steel, edge durability.
Features:
- Manual bending is with a fully welded steel structure and high strength.
- Strong bending capability, and reduction of labor intensity.
- Foot pedal can extend and shorten freely.
- The height of the foot pedal is low, easy operation.
Used for mild steel, aluminum copper, brass zinc plastic, leads High carbon, and chrome steel blade | Description
Hydraulic round bending machine with hydraulic motor
both Vertical and horizontal bending
Features:
- Horizontal and vertical operation
- With the standard foot pedal
- Special cast frame+
- Shafts are hardened with special steel material
- Rollers are special steel material hardened and grounded
- Gears Milled with full material
- HRBM50HV with hydraulic control
| Description
TAB-ECP25 eccentric press is a suitable open type of crank press featuring a left and right open type machine body (i.e., a C-shaped machine body). Its steel plate welded body has a high shock-absorbing performance. Its novel overall design gives the machine an elegant appearance. Its throat has a certain depth. The compact structure makes the use convenient and operation safe. The punch press is equipped with a turn-key rigid clutch, a cam band brake, and a press-down type safety device. Its working table is open on three sides, so the mold loading and unloading, and operation are convenient. The punch press is widely used because it provides good conditions for mechanization and automation. And as the main equipment for plate punching production, the punch press can be used for punching holes, blanking, trimming, bending, shallow stretching, and forming. |
| Content |
| Model |
SP2121 560×3000mm |
| Swing over Bed |
560 mm |
| Swing over Cross Slide |
350 mm |
| Swing over Gap |
788 mm |
| Distance Between Centers |
3000 mm |
| Width of Bed |
350 mm |
| Spindle Bore |
80mm/103mm |
| Spindle Taper |
MT7 |
| Spindle Nose |
D1-8 |
| Range of Spindle Speeds |
25-1600 rpm |
| Range of Longitudinal Feeds |
0.059-1.646 mm/rev |
| Range of Traverse Feeds |
0.020-0.573 mm/rev |
| Tailstock Quill Travel |
180 mm |
| Tailstock Quill Taper |
MT5 |
| Number of Inch Threads |
60 |
| Range of Inch Threads |
2-112 TPI |
| Number of Metric Threads |
47 |
| Range of Metric Threads |
0.2-14.0 mm |
| Main Motor Power |
7500 w (10HP) |
| Coolant Power |
100 w (1/8 HP) |
| Overall Dimensions (LxWxH) |
3400 x 1120 x 1430 mm |
| Net Weight |
2720 kg |
| Gross Weight |
3110 kg |
|
| model |
Pipe Bending Machine RBM40HV |
| Motor power |
1.5 kW |
| Leading roller speed |
9.3 r/min |
| Roller shaft diameter |
40 mm |
| Dimensions machine |
1400×950×1340 mm |
| Net weight |
425 kg |
|
| Model |
SP3103 |
| Max. drilling diameter (steel) |
25mm |
| Max. taping diameter (steel) |
M12mm |
| Max. stroke of the spindle |
110mm |
| Distance between spindle center line to the generating line of column |
230mm |
| Max. distance between spindle end to the surface of the worktable |
690mm |
| Max. distance between spindle end to the worktable surface of the base |
1180mm |
| Max. stroke of worktable and its bracket |
555mm |
| Spindle taper bore |
MT3 |
| Number of speed steps of the spindle |
Stepless |
| Spindle speed range |
80 ~ 1600 r/min |
| Working area of the worktable (L x W) |
400×320mm |
| Working area of the worktable of the base(L x W) |
340×320mm |
| Diameter of column |
100mm |
| Power of the main power |
0.55/0.85kw |
| Machine dimension (L×B×H) |
820×530×1715mm |
| Packing dimension(L×B×H) |
860×580×1800mm |
| Net weight/gross weight |
245/280kg |
|
| Title |
Values |
| Model |
2×1300 |
| Max thickness of Plate(mm) |
2 |
| Max width of Plate(mm) |
1300 |
| Back gauge range(mm) |
0-700 |
| Weight (kg) |
545 |
| Overall Dimension (mm) |
1680×760×1150 |
|
| Model |
HRBM50HV |
| Motor power |
2,2 kW |
| Leading roller speed |
13 r/min |
| Roller shaft diameter |
50 mm |
| Dimensions machine |
1500×950×1340 mm |
| Net weight |
515 kg |
|
| Model |
Unit |
TAB-ECP25 |
| Nominal Pressure |
kn |
250 |
| Travel of slip block |
mm |
70 |
| Frequency of travel |
Frequency/minute |
40 |
| Enclosed height |
mm |
70 |
| Maximum adjustment of enclosed height |
mm |
60 |
| Distance from center of slip block to press body |
mm |
180 |
| Size of shank holes diameter |
mm |
40 |
| Bolster Surface |
Front to Rear |
mm |
520 |
| Left to Right |
mm |
330 |
| Size of shank holes depth |
mm |
60 |
| Distance between Uprights |
mm |
160 |
| Thickness of plate of workbench |
mm |
170 |
| Motor Power |
kw |
2.2 |
| Overall Dimension |
F.B. |
mm |
910 |
| L.R. |
mm |
700 |
| Height |
mm |
1800 |
|
