| Description | Descriptions
Round bending machine both Vertical and horizontal bending
Features:
- Horizontal and vertical operation
- With standard foot pedal
- Special cast frame+
- Shafts are hardened with special steel material
- Rollers are special steel material hardened and grounded
- Gears Milled with full material
| Description
The Bending machine adopts the sliding guide rail, and tension spring using sliding stationary, reducing the operating force by two-thirds, the bending, machine can be equipped with a pressure loading device, high shearing quality, and lightweight, mobile convenience features. It is widely used in the sheet metal industry, the machine tool made of high alloy tool steel, edge durability.
Features:
- Manual bending is with a fully welded steel structure and high strength.
- Strong bending capability, and reduction of labor intensity.
- Foot pedal can extend and shorten freely.
- The height of the foot pedal is low, easy operation.
Used for mild steel, aluminum copper, brass zinc plastic, leads High carbon, and chrome steel blade | Description
TAB-ECP25 eccentric press is a suitable open type of crank press featuring a left and right open type machine body (i.e., a C-shaped machine body). Its steel plate welded body has a high shock-absorbing performance. Its novel overall design gives the machine an elegant appearance. Its throat has a certain depth. The compact structure makes the use convenient and operation safe. The punch press is equipped with a turn-key rigid clutch, a cam band brake, and a press-down type safety device. Its working table is open on three sides, so the mold loading and unloading, and operation are convenient. The punch press is widely used because it provides good conditions for mechanization and automation. And as the main equipment for plate punching production, the punch press can be used for punching holes, blanking, trimming, bending, shallow stretching, and forming. | Description
TAB-ECP6.3-1 eccentric press is a suitable open type of crank press featuring a left and right open type machine body (i.e., a C-shaped machine body). Its steel plate welded body has a high shock-absorbing performance. Its novel overall design gives the machine an elegant appearance. Its throat has a certain depth. The compact structure makes the use convenient and operation safe. The punch press is equipped with a turn-key rigid clutch, a cam band brake, and a press-down type safety device. Its working table is open on three sides, so the mold loading and unloading, and operation are convenient. The punch press is widely used because it provides good conditions for mechanization and automation. And as the main equipment for plate punching production, the punch press can be used for punching holes, blanking, trimming, bending, shallow stretching, and forming. | Description
SP5213A mini drilling press machine belongs to one of our most economical manual mini drilling press machines. it is small and delicate in design.
Features:
- Excellent performance
- Powerful motor
- OEM accepted
- Small bench type one
| Description
This SP3103 machine is a step-less timing vertical drilling machine with a wide belt, light in weight small in volume easy to operate, safe, and reliable.
It is a universal machine that could be widely used for small and middle-sized workpieces or drilling spot facing, reaming, tapping, etc.
And it also could equip many kinds of accessories, to extend machining function and usage area.
Digital speeds screen installed
These machines are suitable for machining workshops, maintenance workshops, and mini-type workshops. |
| Content |
| model |
Pipe Bending Machine RBM30HV |
| Motor power |
1.1 kW |
| Leading roller speed |
9 r/min |
| Roller shaft diameter |
30 mm |
| Dimensions machine |
820×620×1260 mm |
| Net weight |
282 kg |
|
| Title |
Values |
| Model |
2×1300 |
| Max thickness of Plate(mm) |
2 |
| Max width of Plate(mm) |
1300 |
| Back gauge range(mm) |
0-700 |
| Weight (kg) |
545 |
| Overall Dimension (mm) |
1680×760×1150 |
|
| Model |
Unit |
TAB-ECP25 |
| Nominal Pressure |
kn |
250 |
| Travel of slip block |
mm |
70 |
| Frequency of travel |
Frequency/minute |
40 |
| Enclosed height |
mm |
70 |
| Maximum adjustment of enclosed height |
mm |
60 |
| Distance from center of slip block to press body |
mm |
180 |
| Size of shank holes diameter |
mm |
40 |
| Bolster Surface |
Front to Rear |
mm |
520 |
| Left to Right |
mm |
330 |
| Size of shank holes depth |
mm |
60 |
| Distance between Uprights |
mm |
160 |
| Thickness of plate of workbench |
mm |
170 |
| Motor Power |
kw |
2.2 |
| Overall Dimension |
F.B. |
mm |
910 |
| L.R. |
mm |
700 |
| Height |
mm |
1800 |
|
| Model |
Unit |
TAB-ECP6.3 |
| Nominal Pressure |
kn |
63 |
| Travel of slip block |
mm |
40 |
| Frequency of travel |
Frequency/minute |
50 |
| Enclosed height |
mm |
70 |
| Maximum adjustment of enclosed height |
mm |
30 |
| Distance from center of slip block to press body |
mm |
190 |
| Size of shank holes diameter |
mm |
70 |
| Bolster Surface |
Front to Rear |
mm |
200 |
| Left to Right |
mm |
340 |
| Size of shank holes depth |
mm |
70 |
| Distance between columns |
mm |
120 |
| Thickness of plate of workbench |
mm |
30 |
| Mold Height |
mm |
190 |
| Maximum tilt angle of press body |
degree |
20 |
| Motor Power |
kw |
0.75 |
| Overall Dimension |
F.B. |
mm |
400 |
| L.R. |
mm |
500 |
| Height |
mm |
1300 |
|
| Model |
SP5213A |
| Drilling capacity |
Ø13mm (1/2") |
| Motor power |
250/350W |
| Chuck Capacity |
1.5-13mm |
| Spindle stroke |
50mm |
| Class Of Speed |
5 |
| Speed 60Hz |
620~2620/740~3140 R.P.M |
| Spindle taper |
B16 |
| Auto-feeding step of worktable |
105mm |
| Max. distance from spindle end to surface of table |
220mm |
| Max. distance from spindle end to surface of base |
300mm |
| Swing |
210mm |
| Table size |
160×160mm |
| Base Size |
290×190mm |
| Column Diameter |
Ø46mm |
| Height |
580mm |
| N.W./G.W. |
16/17kg |
|
| Model |
SP3103 |
| Max. drilling diameter (steel) |
25mm |
| Max. taping diameter (steel) |
M12mm |
| Max. stroke of the spindle |
110mm |
| Distance between spindle center line to the generating line of column |
230mm |
| Max. distance between spindle end to the surface of the worktable |
690mm |
| Max. distance between spindle end to the worktable surface of the base |
1180mm |
| Max. stroke of worktable and its bracket |
555mm |
| Spindle taper bore |
MT3 |
| Number of speed steps of the spindle |
Stepless |
| Spindle speed range |
80 ~ 1600 r/min |
| Working area of the worktable (L x W) |
400×320mm |
| Working area of the worktable of the base(L x W) |
340×320mm |
| Diameter of column |
100mm |
| Power of the main power |
0.55/0.85kw |
| Machine dimension (L×B×H) |
820×530×1715mm |
| Packing dimension(L×B×H) |
860×580×1800mm |
| Net weight/gross weight |
245/280kg |
|
