TAB-ECP40 eccentric press is a suitable open type of crank press featuring a left and right open type machine body (i.e., a C-shaped machine body). Its steel plate welded body has a high shock-absorbing performance. Its novel overall design gives the machine an elegant appearance. Its throat has a certain depth. The compact structure makes the use convenient and operation safe. The punch press is equipped with a turn-key rigid clutch, a cam band brake, and a press-down type safety device. Its working table is open on three sides, so the mold loading and unloading, and operation are convenient. The punch press is widely used because it provides good conditions for mechanization and automation. And as the main equipment for plate punching production, the punch press can be used for punching holes, blanking, trimming, bending, shallow stretching, and forming.
Description
TAB-ECP40 eccentric press is a suitable open type of crank press featuring a left and right open type machine body (i.e., a C-shaped machine body). Its steel plate welded body has a high shock-absorbing performance. Its novel overall design gives the machine an elegant appearance. Its throat has a certain depth. The compact structure makes the use convenient and operation safe. The punch press is equipped with a turn-key rigid clutch, a cam band brake, and a press-down type safety device. Its working table is open on three sides, so the mold loading and unloading, and operation are convenient. The punch press is widely used because it provides good conditions for mechanization and automation. And as the main equipment for plate punching production, the punch press can be used for punching holes, blanking, trimming, bending, shallow stretching, and forming.
DescriptionsSP-D3112S All geared Drilling Machine
New-designed, pleasing appearance, compact construction, wide speed change range, easy to operate.
Easy operation with its unique workable.
The working table can be rotated 180 and can be tied to +45 and -45 also it is a reliable and easy job that can be done.
Equipped with a coolant system and tapping mechanism.
Equipped with shortcut and overload protection, its electricity stem with powerful spindle torment is designed according to IEC standards.
Characteristic protection device, small batch and mass production for drilling counter boring, reaming, tapping, spot facing, etc.
Description
The TAB LM500 Conventional lathe gets the job done efficiently, and affordably. This customized lathe machine from Altabsh has a modern, tested design, top installations, and safety regulations. Which can do most small works easily and fast. for usage mechanics workshops, lathes workshops, and central maintenance workshops for companies, factories, and supply companies. With a 500mm swing, 1000/1500/2000/3000mm distance between centers, a wide range of speed feeds, and screw-cutting options, this lathe machine has an advantage over its competitors.
Features:
Precision ground and hardened bed ways.
The spindle is supported with precision roller bearings. The spindle system is high in rigidity and accuracy.
There is no need to change gears. The machine can turn about 90 kinds of metric, inch, module, and D.P. threads.
An automatic stopping device is used to realize an automatic stop for the machining of a workpiece of a certain length.
Easy operating speed change levers.
Removable gap is provided for larger diameter work.
Description
SP5216C-II drill press belongs to one of our most economical drill pressFeatures:
1. Very good quality
2. Fast-opened or locked pulley cover;
3. Variable speed system-pagoda pulley;
4. Three-spoke feed handle and external depth stop;
5. Control panel for easy operation;
6. Continuous-duty motor;
7. Chuck guard for safety;
8. Rack pinion for accurate height adjustments;
10. Swivel knob;
11. Study cast iron base.
Description
The TAB L-280 Bench lathe gets the job done efficiently, and affordably.
This customized lathe machine from Altabsh has a modern, tested design, top installations, and safety regulations. Which can do most small works easily and fast. for usage in private workshops, institutions, individuals, and hobbies.
With a 280mm swing, 610/815mm mm distance between centers, a wide range of speed feeds, and screw-cutting options, this lathe machine has an advantage over its competitors.
Description SP-D3121S All Geared Drilling Machine
New-designed, pleasing appearance, compact construction, wide speed change range, easy to operate.
Easy operation with its unique workable, and both motor-drive and manual-operated lifting device.
The working table can be rotated 180 and can be tied to +45 and -45 also it is a reliable and easy job that can be done.
Equipped with a coolant system and tapping mechanism.
Equipped with shortcut and overload protection, its electricity stem with powerful spindle torment is designed according to IEC standards.
Characteristic protection device, small batch and mass production for drilling counter boring, reaming, tapping, spot facing, etc.
Content
Model
Unit
TAB-ECP40
Nominal Pressure
kn
400
Travel of slip block
mm
100
Frequency of travel
Frequency/minute
50
Enclosed height
mm
70
Maximum adjustment of enclosed height
mm
60
Distance from center of slip block to press body
mm
230
Size of shank holes diameter
mm
50
Bolster Surface
Front to Rear
mm
410
Left to Right
mm
640
Size of shank holes depth
mm
70
Distance between columns
mm
320
Thickness of plate of workbench
mm
80
Mold Height
mm
230
Maximum tilt angle of press body
degree
15
Motor Power
kw
3
Overall Dimension
F.B.
mm
1400
L.R.
mm
1200
Height
mm
2450
model
SP-D3112S
Max.Drilling capacity (mm)
35
Diameter of column (mm)
140
Spindle travel (mm)
150
Distance spindle axis to column generating line (mm)
330
Max.Distance spindle nose to table (mm)
610
Max.Distance spindle nose to table (mm)
1150
Spindle taper
MT4
Spindle speeds range (r/min)
70-2600
Spindle speeds series
12
Spindle feeds 3 (r/min)
0.1 0.2 0.3
Dimension of worktable surface (mm)
420×420
Table travel (mm)
540
Dimension of base table (mm)
420×380
Overall height (mm)
2150
Main motor (KW)
1.5/2.2
Coolant motor (KW)
0.085
G.W/N. W (kg)
730/670
Model
TAB-LM500
CAPACITY
Max.swing over bed
500mm
Max.swing over carriage
260mm
Max. swing over gap
710mm
Distance between centers
1000/1500/2000/3000mm
Bed width
405mm
SPINDLE
Spindle nose
D8
Spindle bore
80mm
Taper bore of spindle
M.T.NO.7
Steps of spindle speed
24
Range of spindle speed
9~1600rpm
FEED
Range of longitudinal feeds
0.063~6.43 (0.0023"~0.2392") mm
Range of cross feeds
0.027~2.73(0.0010"~0.1016") mm
RAPID TRAVEL
Longitudinal
4500mm/min
Cross
1900mm/min
THREAD RANGE/ NUMBER
Metric pitch threads
1~224mm/ 46
Whit-worth threads
28~1/8 TPI/ 26
Module threads
0.5~112mm/ 42
D.P. Threads
56~1/4 DP/ 45
TAILSTOCK SLEEVE
Taper bore
M.T.NO.5
Max. travel
150(5~29/32") mm
External diameter
75(2~61/64") mm
OTHERS
Size of tool shank
25×25mm
Max travel of cross slide
360mm
Max. travel of top slide
145mm
Main motor power
7.5kw (10HP)
Overall dimensions(L×W×H)
(2500/3000/3500/4500) ×900×1259mm
Net weight
2750/3000/3250/3600kg
Model
SP5216C-II
Drilling capacity
Ø16mm (5/8")
Motor power
375/450/550W
Chuck Capacity
3-16mm
Spindle stroke
85mm
Class Of Speed
16
Speed 60Hz
180~2770/220~3320 R.P.M
Spindle taper
MT2
Auto-feeding step of worktable
180mm
Max. distance from spindle end to surface of table
685mm
Max. distance from spindle end to surface of base
1175mm
Swing
360mm
Table size
290×290mm
Base Size
460×270mm
Column Diameter
Ø72mm
Height
1600mm
N.W./G.W.
66/70kg
model
TAB L-280
Swing over bed
280mm
Distance between Centers
610/815mm
MAX swing diameter over middle carriage
165mm
Spindle bore
26mm
Headstock taper
MT5#
Y-Axis Working Travel
160 mm
X-Axis Working Travel of toolpost slide
75mm
Modulus thread kinds on processing
18mm
Modulus thread pitch on processing
0.20-3.5mm
Inch thread pitch on processing
34 kinds
Inch thread pitch on processing
41/2~48 1/n”
Moulder thread kinds on processing
16 kinds
Moulder thread pitch on processing
0.2-1.75MP
Diametral thread kinds on processing
24 kinds
Diametral thread pitch on processing
16-120∏ /DP”
Longitudinal feed on spindle toolcarrier
0.05-0.035mm/r
Cross feed on spindle toolcarrier
0.025-0.18mm/r
Tailstock quill travel
60mm
Tailstock Taper
MT3#
Spindle speed step/range
80/90-1800rpm
Electric motor
750W
Net weight
255/280KG
Overall dimension
1310/1515×650×1200mm
model
SP-D3121S
Max.Drilling capacity (mm)
40
Diameter of column (mm)
160
Spindle travel (mm)
180
Distance spindle axis to column generating line (mm)
500mm
