Description 

The pipe threading lathe 200 is mainly used for processing inner and outer pipe thread (including metric thread and inch thread) and can undertake various turning works such as turning inner and outer cylindrical surfaces, rotative surfaces, end surfaces, etc.
This pipe threading lathe is also equipped with a tapered device, which can be used for processing taper thread.

Features:

  1. All parts are processed in precision to ensure lathe work has a good performance.
  2. The ultrasonic frequency quenched guideways have good wear resistance.
  3. The gears have been quenched and ground by a grinding machine.
  4. The spindle adopts a two-supporting structure and runs smoothly and precisely at high speed as all gears are properly processed.
  5. Headstock, feedbox, and apron are all made of high-quality cast iron, which is cast with resin sand foundry technology.
  6. The lathe is equipped with reliable safety devices such as a braking system, emergency power-off switch, and overload protection system.

Description

Model Pipe Lathe 200
Max. Dia. Swing over bed (mm) 630
Max. Dia. Swing over cross slide (mm) 340
Range of processing pipe thread (mm) 30-126
Max. length of workpiece (mm) 1500
Max. taper of workpiece (mm) 1:4
Max. stroke/traverse of taper bar (mm) 750
Width of bed (mm) 490
Spindle bore (mm) 200
Main motor power (kw) 7.5
Steps and range of spindle speed (r/min) 18steps/12-642r/min
Number and range of longitudinal feeds (kinds/mm) 26/0.07-1.33
Number and range of transverse feeds (kinds/mm) 22/0.02-0.45
Number and range of processing metric thread (kinds/mm) 52/1-24
Number and range of processing inch thread (tooth/inch) 40kinds/2-28
Lead screw pitch (inch) 1/2
Rapid movement speed of saddle (mm/min) 4000
Rapid movement speed of cross slide (mm/min) 2300
Max. stroke/traverse of saddle (mm/min) 1310
Max. stroke/traverse of cross slide (mm/min) 390
Max. stroke/traverse of turret/tool post (mm/min) 200
Distance between spindle center and fitting surface of tool (mm) 32.5
Size of tool section (mm) 30×30
Max. rotation angle of tool post (°) ±60°
Range of movement on cross slide dial (mm/scale) 0.05
Range of movement on tool post (mm/scale) 0.05
Dia. and taper of tailstock sleeve (mm/mores) 100/m5#
Stroke/traverse of tailstock sleeve (mm) 205
Transverse movement of tailstock (mm) ±15
Overall dimension(L/W/H) 3657 ×1449×1393
Net weight/Gross weight(kg) 4260/5110
Chuck 400 3-jaw chuck
Taper bar and rear support Both

Quick Comparison

SettingsPipe Lathe Machine 200 مخرطة مواسير removeAll Geared Drilling Machine SP-D3112S درل عامودي تروس سرعات removeDrill Press Machine SP5232B دريل برس removeConventional Lathe Machine TAB-LM770 مخرطة معادن removeAll Geared Drilling Machine SP-D3121S درل عامودي تروس سرعات removeDrill Press Machine SP5216C-II دريل برس remove
NamePipe Lathe Machine 200 مخرطة مواسير removeAll Geared Drilling Machine SP-D3112S درل عامودي تروس سرعات removeDrill Press Machine SP5232B دريل برس removeConventional Lathe Machine TAB-LM770 مخرطة معادن removeAll Geared Drilling Machine SP-D3121S درل عامودي تروس سرعات removeDrill Press Machine SP5216C-II دريل برس remove
Image
SKU
Rating
(No)
(No)
(No)
(No)
(No)
(No)
Price
Stock
Availability
Add to cart

Read more

Read more

Read more

Read more

Read more

Read more

DescriptionDescription  The pipe threading lathe 200 is mainly used for processing inner and outer pipe thread (including metric thread and inch thread) and can undertake various turning works such as turning inner and outer cylindrical surfaces, rotative surfaces, end surfaces, etc. This pipe threading lathe is also equipped with a tapered device, which can be used for processing taper thread. Features:
  1. All parts are processed in precision to ensure lathe work has a good performance.
  2. The ultrasonic frequency quenched guideways have good wear resistance.
  3. The gears have been quenched and ground by a grinding machine.
  4. The spindle adopts a two-supporting structure and runs smoothly and precisely at high speed as all gears are properly processed.
  5. Headstock, feedbox, and apron are all made of high-quality cast iron, which is cast with resin sand foundry technology.
  6. The lathe is equipped with reliable safety devices such as a braking system, emergency power-off switch, and overload protection system.
Descriptions SP-D3112S All geared Drilling Machine New-designed, pleasing appearance, compact construction, wide speed change range, easy to operate. Easy operation with its unique workable. The working table can be rotated 180 and can be tied to +45 and -45 also it is a reliable and easy job that can be done. Equipped with a coolant system and tapping mechanism. Equipped with shortcut and overload protection, its electricity stem with powerful spindle torment is designed according to IEC standards. Characteristic protection device, small batch and mass production for drilling counter boring, reaming, tapping, spot facing, etc.  Description SP5232B drill press belongs to one of our most economical manual drill press machines it is medium-sized and delicate in design Features:
  1. Keyed safety switch prevents accidental starting
  2. 2-speed settings to accommodate various materials and thicknesses
  3. height adjustable
  4. Pinion table elevation makes adjusting the table height easy and accurate
Description: TAB LM770 Conventional lathe is with a swing of 770mm for Medium industrial, the motor power is 7.5kw. Features:
  1. Precision ground and hardened bed ways.
  2. The spindle is supported with precision roller bearings. The spindle system is high in rigidity and accuracy.
  3. An automatic stopping device is used to realize an automatic stop for machining a workpiece of a certain length.
  4. Easy operating speed change levers.
  5. Removable gap is provided for more significant diameter work.
Description  SP-D3121S All Geared Drilling Machine New-designed, pleasing appearance, compact construction, wide speed change range, easy to operate. Easy operation with its unique workable, and both motor-drive and manual-operated lifting device. The working table can be rotated 180 and can be tied to +45 and -45 also it is a reliable and easy job that can be done. Equipped with a coolant system and tapping mechanism. Equipped with shortcut and overload protection, its electricity stem with powerful spindle torment is designed according to IEC standards. Characteristic protection device, small batch and mass production for drilling counter boring, reaming, tapping, spot facing, etc.Description SP5216C-II  drill press belongs to one of our most economical drill press Features: 1. Very good quality 2. Fast-opened or locked pulley cover; 3. Variable speed system-pagoda pulley; 4. Three-spoke feed handle and external depth stop; 5. Control panel for easy operation; 6. Continuous-duty motor; 7. Chuck guard for safety; 8. Rack pinion for accurate height adjustments; 10. Swivel knob; 11. Study cast iron base.
Content
Model Pipe Lathe 200
Max. Dia. Swing over bed (mm) 630
Max. Dia. Swing over cross slide (mm) 340
Range of processing pipe thread (mm) 30-126
Max. length of workpiece (mm) 1500
Max. taper of workpiece (mm) 1:4
Max. stroke/traverse of taper bar (mm) 750
Width of bed (mm) 490
Spindle bore (mm) 200
Main motor power (kw) 7.5
Steps and range of spindle speed (r/min) 18steps/12-642r/min
Number and range of longitudinal feeds (kinds/mm) 26/0.07-1.33
Number and range of transverse feeds (kinds/mm) 22/0.02-0.45
Number and range of processing metric thread (kinds/mm) 52/1-24
Number and range of processing inch thread (tooth/inch) 40kinds/2-28
Lead screw pitch (inch) 1/2
Rapid movement speed of saddle (mm/min) 4000
Rapid movement speed of cross slide (mm/min) 2300
Max. stroke/traverse of saddle (mm/min) 1310
Max. stroke/traverse of cross slide (mm/min) 390
Max. stroke/traverse of turret/tool post (mm/min) 200
Distance between spindle center and fitting surface of tool (mm) 32.5
Size of tool section (mm) 30×30
Max. rotation angle of tool post (°) ±60°
Range of movement on cross slide dial (mm/scale) 0.05
Range of movement on tool post (mm/scale) 0.05
Dia. and taper of tailstock sleeve (mm/mores) 100/m5#
Stroke/traverse of tailstock sleeve (mm) 205
Transverse movement of tailstock (mm) ±15
Overall dimension(L/W/H) 3657 ×1449×1393
Net weight/Gross weight(kg) 4260/5110
Chuck 400 3-jaw chuck
Taper bar and rear support Both
model SP-D3112S
Max.Drilling capacity (mm) 35
Diameter of column (mm) 140
Spindle travel (mm) 150
Distance spindle axis to column generating line (mm) 330
Max.Distance spindle nose to table (mm) 610
Max.Distance spindle nose to table (mm) 1150
Spindle taper MT4
Spindle speeds range (r/min) 70-2600
Spindle speeds series 12
Spindle feeds 3 (r/min) 0.1 0.2 0.3
Dimension of worktable surface (mm) 420×420
Table travel (mm) 540
Dimension of base table (mm) 420×380
Overall height (mm) 2150
Main motor (KW) 1.5/2.2
Coolant motor (KW) 0.085
G.W/N. W (kg) 730/670
Model SP5232B
Drilling capacity Ø32mm (1-1/4")
Motor power 1500W
Chuck Capacity 5-20mm
Spindle stroke 120mm
Class Of Speed 12
Speed 60Hz 150~2450/180~2940 R.P.M
Spindle taper MT4
Auto-feeding step of worktable 255mm
Max. distance from spindle end to surface of table 745mm
Max. distance from spindle end to surface of base 1205mm
Swing 510mm
Table size 420×480mm
Base Size 560×450mm
Column Diameter Ø92mm
Height 1710mm
N.W./G.W. 125/130kg
MODEL TAB-LM770
CAPACITY
Max. swing over bed 770mm
Max. swing over carriage 575mm
Max. swing over gap 1050mm
Bed width 405mm
Effective length of gap 230mm
Distance between centers 1000/1500/2000/3000mm
Max turning length 830/1330/1830/2830mm
SPINDLE
Spindle nose D8
Spindle bore 105mm
Taper bore of spindle 113mm 1:20
Steps of spindle speed 12
Range of spindle speed 36~1600rpm
FEED
Range of longitudinal feeds 0.063~2.52 (0.023"~0.937")mm
Range of cross feeds 0.027~1.07(0.010"~0.404")mm
RAPID TRAVEL
Longitudinal 4500mm/min
Cross 1900mm/min
THREAD RANGE/ NUMBER
Metric pitch threads 1~14mm/ 22
Whit-worth threads 28~2TPI/ 26
 
model SP-D3121S
Max.Drilling capacity (mm) 40
Diameter of column (mm) 160
Spindle travel (mm) 180
Distance spindle axis to column generating line (mm) 360
Max.Distance spindle nose to table (mm) 600
Max.Distance spindle nose to table (mm) 1215
Spindle taper MT4
Spindle speeds range (r/min) 42-2050
Spindle speeds series 12
Spindle feeds 4 (r/min) 0.07,0.15,0.25,0.40
Dimension of worktable surface (mm) 460×450
Table travel (mm) 560
Dimension of base table (mm) 510×380
Overall height (mm) 2310
Main motor (KW) 2.2/2.8
Coolant motor (KW) 0.024
G.W/N. W (kg) 800/730
 
Model SP5216C-II
Drilling capacity Ø16mm (5/8")
Motor power 375/450/550W
Chuck Capacity 3-16mm
Spindle stroke 85mm
Class Of Speed 16
Speed 60Hz 180~2770/220~3320 R.P.M
Spindle taper MT2
Auto-feeding step of worktable 180mm
Max. distance from spindle end to surface of table 685mm
Max. distance from spindle end to surface of base 1175mm
Swing 360mm
Table size 290×290mm
Base Size 460×270mm
Column Diameter Ø72mm
Height 1600mm
N.W./G.W. 66/70kg
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information