Description | Description
The rebar bender machine can bend 1/4'' to 1" (6 to 25 mm) rebar to 0-180°in 6-7 seconds. Two standard foot pedal control switches for hands-free bending. It is widely used in construction engineering, used to bend round steel, rebar, screw, and so on, the machine can be batch operation. Built-in safety device can stop operation immediately.
Features:
- 1600W high-power pure copper coil motor, smooth operation, low noise, long life, higher work efficiency.
- Ultra-fast bending speed, can complete a steel bar bending in 6-7 seconds, saving time.
- The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Moreover, it can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste.
- This rod-bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending.
- Footswitch design, convenient and efficient bending. With four handles on the corner for you to transport and operate effortlessly. | Description:
The TAB L-330 light lathe gets the job done efficiently, and affordably.
This customized lathe machine from Altabsh has a modern, tested design, top installations, and safety regulations. Which can do most small works easily and fast. for usage in the light industry small workshops and central maintenance workshops for companies.
With a 330mm swing, a 1000mm distance between centers, a wide range of speed feeds, and screw-cutting options, this lathe machine has an advantage over its competitors.
Features:
- Hardened and ground bed ways engineered from high-grade castings.
- Removable gap is provided for larger diameter work and easy operating gear box can be various feeds and thread cutting.
- 8 speeds all geared headstock.
- Cross and longitudinal interlocking feed, enough safety
- All machines must pass the checklist of machine precision before shipment
- Including switch for test running
- There is an extra safety switch that automatically shuts down the machine for changing the belt or gear for threading cutting.
- Jog button for easy gear engagement and inching spindle.
| Description
SP-D3121S All Geared Drilling Machine
New-designed, pleasing appearance, compact construction, wide speed change range, easy to operate.
Easy operation with its unique workable, and both motor-drive and manual-operated lifting device.
The working table can be rotated 180 and can be tied to +45 and -45 also it is a reliable and easy job that can be done.
Equipped with a coolant system and tapping mechanism.
Equipped with shortcut and overload protection, its electricity stem with powerful spindle torment is designed according to IEC standards.
Characteristic protection device, small batch and mass production for drilling counter boring, reaming, tapping, spot facing, etc. | Description
SP5220B drill press belongs to one of our most economical drilling machines. It is Small in size and delicate in design.
Features:
- Chuck guard is standard accessories
- Belt drive
- Widely used, simple to operate, and has a wide range of processing.
| Description
The TAB L-300 light lathe gets the job done efficiently, and affordably. This customized lathe machine from Altabsh has a modern, tested design, top installations, and safety regulations. Which can do most small works easily and fast. for usage in the light industry small workshops and central maintenance workshops for companies.
With a 300mm swing, a 1000mm distance between centers, a wide range of speed feeds, and screw-cutting options, this lathe machine has an advantage over its competitors.
Features:
- Hardened and ground bed ways engineered from high-grade castings.
- Removable gap is provided for larger diameter work and easy operating gear box can be various feeds and thread cutting.
- 8 speeds all geared headstock.
- Cross and longitudinal interlocking feed, enough safety
- All machines must pass the checklist of machine precision before shipment
- Including switch for test running
- There is an extra safety switch that automatically shuts down the machine for changing the belt or gear for threading cutting.
- Jog button for easy gear engagement and inching spindle.
| Description
SP5216B-I Drill press belongs to one of our most economic electric drill press power tools. it is small and delicate in design.
Features:
1. Cast-Iron table, base & head
2. Adjustable depth stops with gauge
3. Smooth table movement with quick lock
4. Adjustable, impact-resistant guard
5. Comfortable handle |
Content |
Model |
RB-25 |
Voltage |
AC220V /60Hz Single Phase |
Power |
1600W |
Bending Angle |
0-180° |
Max.Rebar Diameter |
0.98"(25mm #8 Grade 60) |
Min.Rebar Diameter |
0.24"(6mm #2 Grade 60) |
Bending Speed |
6-7 Seconds |
Max.Rebar Hardness |
HRC30 |
Bending Radius |
1.53"(39mm) |
Gyre idler wheel diameter |
3.70"(94mm) |
Noise |
92db |
Shell Material |
Iron |
Amps |
14A |
Product size |
45.5cm052cmx44.5cm |
Net weight |
91kg |
Gross weight |
129kg |
|
model |
TAB L-330 |
Swing over bed |
330mm |
Swing over cross slide |
198mm |
Swing in gap diameter |
476mm |
Swing in length of gap |
210mm |
Center height |
166mm |
Distance between Center |
1000mm |
Bed width |
187mm |
Spindle bore |
38mm |
Spindle nose |
D1-4" or A2-4" |
Taper in sleeve |
NO.3 Morse |
Speeds number |
8 |
Speeds range |
70-2000r.p.m.or 35-2000r.p.m.(2 speed motor) |
Cross slide travel |
118mm |
Compound rest travel |
68mm |
Lead screw thread |
8T.P.I. or 3mm pitch |
Feed rod diameter |
19mm |
Cutting tool max section |
16mm×16mm |
Threads imperial pitches |
36 Nos.8-112 T.P.I. or (34 Nos.4-56T.P.I) |
Threads metric pitches |
28 Nos.0.2-5mm pitch or (26 Nos.0.4-7mm pitch) |
Longitudinal feeds imperial |
36 Nos.0.0019-0.0273"/Rev.or (32 Nos.0.002-0.548"/Rev) |
Longitudinal feeds metric |
36 Nos.0.050-0.696"/Rev.or (32 Nos.0.052-0.392mm/Rev) |
Cross feeds imperial |
36 Nos.0.0006-0.0094"/Rev.or (32 Nos.0.007-0.0187"/Rev) |
Cross feeds metric |
36 Nos.0.013-0.188"/Rev.or (32 Nos.0.014-0.380mm/Rev) |
Quill diameter |
32mm(1-1/4") |
Quill travel |
100mm(3-15/16") |
Quill taper |
NO.3 morse |
main motor |
1.5KW |
Packing size |
1950×750×1510mm |
Net weight |
640kgs |
Gross weight |
690kgs |
|
model |
SP-D3121S |
Max.Drilling capacity (mm) |
40 |
Diameter of column (mm) |
160 |
Spindle travel (mm) |
180 |
Distance spindle axis to column generating line (mm) |
360 |
Max.Distance spindle nose to table (mm) |
600 |
Max.Distance spindle nose to table (mm) |
1215 |
Spindle taper |
MT4 |
Spindle speeds range (r/min) |
42-2050 |
Spindle speeds series |
12 |
Spindle feeds 4 (r/min) |
0.07,0.15,0.25,0.40 |
Dimension of worktable surface (mm) |
460×450 |
Table travel (mm) |
560 |
Dimension of base table (mm) |
510×380 |
Overall height (mm) |
2310 |
Main motor (KW) |
2.2/2.8 |
Coolant motor (KW) |
0.024 |
G.W/N. W (kg) |
800/730 |
|
Model |
SP5220B |
Drilling capacity |
Ø20mm (3/4") |
Motor power |
450/550/750W |
Chuck Capacity |
5-20mm |
Spindle stroke |
85mm |
Class Of Speed |
16 |
Speed 60Hz |
180~2770/220~3320 R.P.M |
Spindle taper |
MT2 |
Auto-feeding step of worktable |
180mm |
Max. distance from spindle end to surface of table |
685mm |
Max. distance from spindle end to surface of base |
1175mm |
Swing |
360mm |
Table size |
290×290mm |
Base Size |
460×270mm |
Column Diameter |
Ø72mm |
Height |
1600mm |
N.W./G.W. |
68/72kg |
|
model |
TAB L-300 |
Max. Swing over bed: |
300 mm |
Max. Swing over cross slide: |
180 mm |
Max. Swing over gap |
43 mm |
Distance between centers: |
1000 mm |
Spindle bore diameter: |
38 mm |
Taper of spindle bore: |
MT.5 |
Range of spindle Speed |
65~1400 (65-1810) rpm |
Range of Longitudinal feeds |
0.079~1.291mm/rev |
Range of cross feeds |
0.017~0.276 mm/rev |
Range of Metric threads |
0.4~7 mm |
Range of inch threads |
4-60TPI |
Max. Travel of tailstock quill |
100 mm |
Taper of tailstock quill bore |
MT.3 |
Power of main drive motor |
1.5kW |
Packing size |
1940×750×1400 mm |
Net weight |
620 kg |
Gross weight |
670 kg |
|
Model |
SP5216B-I |
Drilling capacity |
Ø16mm (5/8") |
Motor power |
375/450/550W |
Chuck Capacity |
3-16mm |
Spindle stroke |
60mm |
Class Of Speed |
16 |
Speed 60Hz |
180~2770/220~3020 R.P.M |
Spindle taper |
NT2 |
Auto-feeding step of worktable |
162.5mm |
Max. distance from spindle end to surface of table |
450mm |
Max. distance from spindle end to surface of base |
630mm |
Swing |
325mm |
Table size |
Ø290mm |
Base Size |
420×250mm |
Column Diameter |
Ø72mm |
Height |
980mm |
N.W./G.W. |
42/45kg |
|