The pipe threading lathe 200 is mainly used for processing inner and outer pipe thread (including metric thread and inch thread) and can undertake various turning works such as turning inner and outer cylindrical surfaces, rotative surfaces, end surfaces, etc.
This pipe threading lathe is also equipped with a tapered device, which can be used for processing taper thread.
Features:
All parts are processed in precision to ensure lathe work has a good performance.
The ultrasonic frequency quenched guideways have good wear resistance.
The gears have been quenched and ground by a grinding machine.
The spindle adopts a two-supporting structure and runs smoothly and precisely at high speed as all gears are properly processed.
Headstock, feedbox, and apron are all made of high-quality cast iron, which is cast with resin sand foundry technology.
The lathe is equipped with reliable safety devices such as a braking system, emergency power-off switch, and overload protection system.
Description
The pipe threading lathe 200 is mainly used for processing inner and outer pipe thread (including metric thread and inch thread) and can undertake various turning works such as turning inner and outer cylindrical surfaces, rotative surfaces, end surfaces, etc.
This pipe threading lathe is also equipped with a tapered device, which can be used for processing taper thread.
Features:
All parts are processed in precision to ensure lathe work has a good performance.
The ultrasonic frequency quenched guideways have good wear resistance.
The gears have been quenched and ground by a grinding machine.
The spindle adopts a two-supporting structure and runs smoothly and precisely at high speed as all gears are properly processed.
Headstock, feedbox, and apron are all made of high-quality cast iron, which is cast with resin sand foundry technology.
The lathe is equipped with reliable safety devices such as a braking system, emergency power-off switch, and overload protection system.
Description SP-D3121S All Geared Drilling Machine
New-designed, pleasing appearance, compact construction, wide speed change range, easy to operate.
Easy operation with its unique workable, and both motor-drive and manual-operated lifting device.
The working table can be rotated 180 and can be tied to +45 and -45 also it is a reliable and easy job that can be done.
Equipped with a coolant system and tapping mechanism.
Equipped with shortcut and overload protection, its electricity stem with powerful spindle torment is designed according to IEC standards.
Characteristic protection device, small batch and mass production for drilling counter boring, reaming, tapping, spot facing, etc.
DescriptionSP5232B drill press belongs to one of our most economical manual drill press machines it is medium-sized and delicate in design
Features:
Keyed safety switch prevents accidental starting
2-speed settings to accommodate various materials and thicknesses
height adjustable
Pinion table elevation makes adjusting the table height easy and accurate
Description
SP5213A mini drilling press machine belongs to one of our most economical manual mini drilling press machines. it is small and delicate in design.
Features:
Excellent performance
Powerful motor
OEM accepted
Small bench type one
Description
SPL360 Light lathe this manual lathe machine is with swings 360mm for light industrial, and the motor power is 1.5kw powerful. The foot brake is a rapid braking type.
Features:
Hardened and ground bed ways engineered from high-grade castings.
Removable gap is provided for larger diameter work and easy operating gear box can be various feeds and thread cutting.
8 speeds all geared headstock.
Cross and longitudinal interlocking feed, enough safety
All machines have to pass the checklist of the machine precision before shipment
Including switch for test running
There is an extra safety switch that shuts down the machine automatically for changing the belt or gear for threading cutting.
Jog button for easy gear engagement and inching spindle.
Description
SP5216A-I drill press is one of our most economical drill presses. it is small and delicate in design
Features:
Electromagnetic switch
Heating protector in the motor
Micro-switch in the belt cover ensure safety
Processing material: metal, iron, and copper
Precision, convenient operation, and improved work efficiency.
Environmental protection products.
Content
Model
Pipe Lathe 200
Max. Dia. Swing over bed (mm)
630
Max. Dia. Swing over cross slide (mm)
340
Range of processing pipe thread (mm)
30-126
Max. length of workpiece (mm)
1500
Max. taper of workpiece (mm)
1:4
Max. stroke/traverse of taper bar (mm)
750
Width of bed (mm)
490
Spindle bore (mm)
200
Main motor power (kw)
7.5
Steps and range of spindle speed (r/min)
18steps/12-642r/min
Number and range of longitudinal feeds (kinds/mm)
26/0.07-1.33
Number and range of transverse feeds (kinds/mm)
22/0.02-0.45
Number and range of processing metric thread (kinds/mm)
52/1-24
Number and range of processing inch thread (tooth/inch)
40kinds/2-28
Lead screw pitch (inch)
1/2
Rapid movement speed of saddle (mm/min)
4000
Rapid movement speed of cross slide (mm/min)
2300
Max. stroke/traverse of saddle (mm/min)
1310
Max. stroke/traverse of cross slide (mm/min)
390
Max. stroke/traverse of turret/tool post (mm/min)
200
Distance between spindle center and fitting surface of tool (mm)
32.5
Size of tool section (mm)
30×30
Max. rotation angle of tool post (°)
±60°
Range of movement on cross slide dial (mm/scale)
0.05
Range of movement on tool post (mm/scale)
0.05
Dia. and taper of tailstock sleeve (mm/mores)
100/m5#
Stroke/traverse of tailstock sleeve (mm)
205
Transverse movement of tailstock (mm)
±15
Overall dimension(L/W/H)
3657 ×1449×1393
Net weight/Gross weight(kg)
4260/5110
Chuck
400 3-jaw chuck
Taper bar and rear support
Both
model
SP-D3121S
Max.Drilling capacity (mm)
40
Diameter of column (mm)
160
Spindle travel (mm)
180
Distance spindle axis to column generating line (mm)
360
Max.Distance spindle nose to table (mm)
600
Max.Distance spindle nose to table (mm)
1215
Spindle taper
MT4
Spindle speeds range (r/min)
42-2050
Spindle speeds series
12
Spindle feeds 4 (r/min)
0.07,0.15,0.25,0.40
Dimension of worktable surface (mm)
460×450
Table travel (mm)
560
Dimension of base table (mm)
510×380
Overall height (mm)
2310
Main motor (KW)
2.2/2.8
Coolant motor (KW)
0.024
G.W/N. W (kg)
800/730
Model
SP5232B
Drilling capacity
Ø32mm (1-1/4")
Motor power
1500W
Chuck Capacity
5-20mm
Spindle stroke
120mm
Class Of Speed
12
Speed 60Hz
150~2450/180~2940 R.P.M
Spindle taper
MT4
Auto-feeding step of worktable
255mm
Max. distance from spindle end to surface of table
745mm
Max. distance from spindle end to surface of base
1205mm
Swing
510mm
Table size
420×480mm
Base Size
560×450mm
Column Diameter
Ø92mm
Height
1710mm
N.W./G.W.
125/130kg
Model
SP5213A
Drilling capacity
Ø13mm (1/2")
Motor power
250/350W
Chuck Capacity
1.5-13mm
Spindle stroke
50mm
Class Of Speed
5
Speed 60Hz
620~2620/740~3140 R.P.M
Spindle taper
B16
Auto-feeding step of worktable
105mm
Max. distance from spindle end to surface of table
630
