| Description | Description
Adopt Hydraulic drive, easy-to-finish punching plate, channel, angle, I-beam, and other metal materials.
With different stamping dies to achieve different functions, complete the short stroke of stamping parts. The machine adopts two operating cylinders, divided working into two regions, working alone, linked simultaneously, or working independently can be chosen freely. The machine runs smoothly, punching and stamping without vibration noise, it is the ideal stamping machinery.
Features:
- An imported solenoid valve effectively guarantees the stability of the machine running and reduces the failure rate to a minimum.
- The double valve structure, built-in two-way operation of the system, with imported double gear pump, supplied more choices for workers, two stations working individually or simultaneously at the same time.
| Descriptions
Used for thin metal plate rolling
Features:
1. The roller adopts high strength and high life solid bearing roller with long time and small deformation.
2. The driving gear adopts forging high carbon steel, high hardness, and strong wear-resisting property.
3. The whole machine adopts integral steel plate welding, thick and beautiful, and the stability is good.
4. Simple operation, a single person can work independently | Descriptions
Round bending machine both Vertical and horizontal bending
Features:
- Horizontal and vertical operation
- With standard foot pedal
- Special cast frame+
- Shafts are hardened with special steel material
- Rollers are special steel material hardened and grounded
- Gears Milled with full material
| Description
TAB-ECP63 electric press is a suitable open type of crank press featuring a left and right open type machine body (i.e., a C-shaped machine body). Its steel plate welded body has a high shock-absorbing performance. Its novel overall design gives the machine an elegant appearance. Its throat has a certain depth. The compact structure makes the use convenient and operation safe. The punch press is equipped with a turn-key rigid clutch, a cam band brake, and a press-down type safety device. Its working table is open on three sides, so the mold loading and unloading, and operation are convenient. The punch press is widely used because it provides good conditions for mechanization and automation. And as the main equipment for plate punching production, the punch press can be used for punching holes, blanking, trimming, bending, shallow stretching, and forming. | Description:
TAB LM770 Conventional lathe is with a swing of 770mm for Medium industrial, the motor power is 7.5kw.
Features:
- Precision ground and hardened bed ways.
- The spindle is supported with precision roller bearings. The spindle system is high in rigidity and accuracy.
- An automatic stopping device is used to realize an automatic stop for machining a workpiece of a certain length.
- Easy operating speed change levers.
- Removable gap is provided for more significant diameter work.
| Description
It uses compressed air as a power source (air pressure is adjustable)
It is used for riveting rivets of all kinds of brake shoes\brake disc\brake drum\brake lining \ brake pads
Features:
- It uses an air source; it is safe to operate
- It is suitable for heavy-duty truck brake linings
- Pressure can be adjusted according to the size of the rivets
- With oil and water separator
- With grease filling holes
- The pedal room is big
- With a cabinet for accessories
|
| Content |
| Model |
UNIT |
TAB-HPU90 |
| Overall dimensions |
cm |
165×92×195 |
| Net weight |
kg |
1800 |
| Max. punching pressure |
Mpa |
20 |
| Max. punching capacity |
t |
90 |
| Material strength |
N/mm² |
≦450 |
| Max. stroke |
mm |
80 |
| No. of stroke |
times/min |
12-22 |
| Throat depth |
mm |
335 |
| Punching depth |
mm |
20 |
| Max. punching diameter |
mm |
30 |
| Main motor power |
Kw |
7.5 |
| Accuracy: positioning deviation |
mm |
＜0.1 |
| Accuracy: shearing deviation |
mm |
＜0.2 |
| Working noise |
dB |
＜85 |
|
| Manual Metal Sheet Rolling Machine1.50mm×1300mm |
| Model |
Max thickness of Plate(mm) |
Max width of Plate(mm) |
Dia.of upper roller(mm) |
Dia.of side roller(mm) |
Weight (kg) |
Overall Dimension (mm) |
| 1.50×1300 |
1.5 |
1300 |
72 |
80 |
225 |
1800×550×1170 |
|
| model |
Pipe Bending Machine RBM40HV |
| Motor power |
1.5 kW |
| Leading roller speed |
9.3 r/min |
| Roller shaft diameter |
40 mm |
| Dimensions machine |
1400×950×1340 mm |
| Net weight |
425 kg |
|
| Model |
Unit |
TAB-ECP63 |
| Nominal Pressure |
kn |
630 |
| Travel of slip block |
mm |
100 |
| Frequency of travel |
Frequency/minute |
50 |
| Enclosed height |
mm |
70 |
| Maximum adjustment of enclosed height |
mm |
80 |
| Distance from center of slip block to press body |
mm |
230 |
| Size of shank holes diameter |
mm |
50 |
| Bolster Surface |
Front to Rear |
mm |
450 |
| Left to Right |
mm |
700 |
| Size of shank holes depth |
mm |
70 |
| Distance between columns |
mm |
370 |
| Mold Height |
mm |
220 |
| Motor Power |
kw |
5.5 |
| Overall Dimensions |
F.R. |
mm |
1800 |
| L.R. |
mm |
1500 |
| Height |
mm |
2650 |
|
| MODEL |
TAB-LM770 |
| CAPACITY |
| Max. swing over bed |
Ф770mm |
| Max. swing over carriage |
Ф575mm |
| Max. swing over gap |
Ф1050mm |
| Bed width |
405mm |
| Effective length of gap |
230mm |
| Distance between centers |
1000/1500/2000/3000mm |
| Max turning length |
830/1330/1830/2830mm |
| SPINDLE |
| Spindle nose |
D8 |
| Spindle bore |
Ф105mm |
| Taper bore of spindle |
Ф113mm 1:20 |
| Steps of spindle speed |
12 |
| Range of spindle speed |
36~1600rpm |
| FEED |
| Range of longitudinal feeds |
0.063~2.52 (0.023″~0.937″)mm |
| Range of cross feeds |
0.027~1.07(0.010″~0.404″)mm |
| RAPID TRAVEL |
| Longitudinal |
4500mm/min |
| Cross |
1900mm/min |
| THREAD RANGE/ NUMBER |
| Metric pitch threads |
1~14mm/ 22 |
| Whit-worth threads |
28~2TPI/ 26 |
|
| Model no |
SP-8001 |
| Material |
Metal plate |
| Painting |
High-quality paint |
| Color |
Blue |
| Max rivet force |
60KN(6T) |
| Working air pressure |
0.5-0.8Mpa (Adjustable) |
| Suitable rivet diameter |
10mm |
| Stroke of the riveter |
40mm |
| Height adjust distance of the shoe iron bracket |
20mm |
| Packing sizes |
N.W: 69KG |
| G.W: 101KG |
| 580×540×1440mm |
|
