Description

The RBC 25 rebar bending and cutting machine is a versatile tool that streamlines the cutting and bending processes into a single machine, significantly boosting overall operational efficiency. In terms of bending, it employs a dependable mechanical gear transmission system, ensuring reliability, user-friendliness, and simplified maintenance. With a set of dual-angle lockers, the machine allows for presetting bending angles, ranging from 0 to 180 degrees, accommodating various bending requirements.

On the cutting front, the machine incorporates a hydraulic drive system, which delivers substantial cutting force and rapid cutting performance. It takes just 5 seconds to complete a cut, thanks to this efficient setup. To operate the machine, a straightforward and secure three-foot clutch system is employed, ensuring ease of use and safety during operation.

Description

Model RBC-25
Voltage (V) Single Phase 220V
Frequency (Hz) 60 Hz
Wattage (W) 1600 W
Min. Bending Capacity (mm) 6 mm
Max. Bending Capacity (mm) 25 mm
Bending Angle (°) 0-180°
Bending Speed (Sec) 5.0-6.0 s
Machine Dimensions(L×W×H) (mm) 500×450×790mm
Net Weight (Kg) 136Kg
Gross Weight (Kg) 150 Kg

Quick Comparison

SettingsSteel Bar Bending And Cutting Machine RBC25 مقص و تناية اسياخ حديد removeDrill Press Machine SP5216B-I دريل برس removeLathe Milling Machine COMBO 3IN1 BL270 مخرطة معادن مع فريزا removeBench Lathe Machine BL200G مخرطة معادن removeAll Geared Drilling Machine SP-D3121S درل عامودي تروس سرعات removeConventional Lathe Machine TAB-LM500 مخرطة معادن remove
NameSteel Bar Bending And Cutting Machine RBC25 مقص و تناية اسياخ حديد removeDrill Press Machine SP5216B-I دريل برس removeLathe Milling Machine COMBO 3IN1 BL270 مخرطة معادن مع فريزا removeBench Lathe Machine BL200G مخرطة معادن removeAll Geared Drilling Machine SP-D3121S درل عامودي تروس سرعات removeConventional Lathe Machine TAB-LM500 مخرطة معادن remove
Image
SKU
Rating
(No)
(No)
(No)
(No)
(No)
(No)
Price
Stock
Availability
Add to cart

Read more

Read more

Read more

Read more

Read more

Read more

DescriptionDescription The RBC 25 rebar bending and cutting machine is a versatile tool that streamlines the cutting and bending processes into a single machine, significantly boosting overall operational efficiency. In terms of bending, it employs a dependable mechanical gear transmission system, ensuring reliability, user-friendliness, and simplified maintenance. With a set of dual-angle lockers, the machine allows for presetting bending angles, ranging from 0 to 180 degrees, accommodating various bending requirements. On the cutting front, the machine incorporates a hydraulic drive system, which delivers substantial cutting force and rapid cutting performance. It takes just 5 seconds to complete a cut, thanks to this efficient setup. To operate the machine, a straightforward and secure three-foot clutch system is employed, ensuring ease of use and safety during operation.Description SP5216B-I Drill press belongs to one of our most economic electric drill press power tools.  it is small and delicate in design. Features: 1. Cast-Iron table, base & head 2. Adjustable depth stops with gauge 3. Smooth table movement with quick lock 4. Adjustable, impact-resistant guard 5. Comfortable handleDescription  Multi-purpose Combination Mini Lathe Mill Machine 3 In 1 Lathe Drill And Mill Combo is the trend of present world machine tool technology, complex processes on a single machine to reduce machine tool and fixture, eliminating inter-process handing and storage, improve workpiece machine accuracy and shorten the processing cycle and the purpose of saving working area. cutting drilling and milling compounded mini multi-purpose machine BL270 will not only meet the needs of users to reduce floor area, parts delivery and reduce inventory, ensure the machining accuracy, and so on, but also adapt to energy saving requirements of modern society. More and more complex parts using composite machine tools for integrated processing. Features:
  1. Mass production of a variety of small parts and high-speed machining of complex parts, diversity processing;
  2. Complex processes can be done at one time
  3. Function: cutting, drilling, Milling, etc.
  4. Small in size and delicate in design
  5. High Precision for Model Engineering
  6. Easy Operation & Convenient Reparations
Description  The BL200 bench lathe gets the job done efficiently, and affordably. This customized lathe machine from Altabsh has a modern, tested design top installations, and safety regulations. Which can do most small works easily and fast. for usage in the light industry small workshops and central maintenance workshops for companies. With a 200mm swing, 520mm distance between centers, a wide range of speed feeds, and screw-cutting options.Description  SP-D3121S All Geared Drilling Machine New-designed, pleasing appearance, compact construction, wide speed change range, easy to operate. Easy operation with its unique workable, and both motor-drive and manual-operated lifting device. The working table can be rotated 180 and can be tied to +45 and -45 also it is a reliable and easy job that can be done. Equipped with a coolant system and tapping mechanism. Equipped with shortcut and overload protection, its electricity stem with powerful spindle torment is designed according to IEC standards. Characteristic protection device, small batch and mass production for drilling counter boring, reaming, tapping, spot facing, etc.Description  The TAB LM500 Conventional lathe gets the job done efficiently, and affordably. This customized lathe machine from Altabsh has a modern, tested design, top installations, and safety regulations. Which can do most small works easily and fast. for usage mechanics workshops, lathes workshops, and central maintenance workshops for companies, factories, and supply companies. With a 500mm swing, 1000/1500/2000/3000mm distance between centers, a wide range of speed feeds, and screw-cutting options, this lathe machine has an advantage over its competitors. Features:
  1. Precision ground and hardened bed ways.
  2. The spindle is supported with precision roller bearings. The spindle system is high in rigidity and accuracy.
  3. There is no need to change gears. The machine can turn about 90 kinds of metric, inch, module, and D.P. threads.
  4. An automatic stopping device is used to realize an automatic stop for the machining of a workpiece of a certain length.
  5. Easy operating speed change levers.
  6. Removable gap is provided for larger diameter work.
Content
Model RBC-25
Voltage (V) Single Phase 220V
Frequency (Hz) 60 Hz
Wattage (W) 1600 W
Min. Bending Capacity (mm) 6 mm
Max. Bending Capacity (mm) 25 mm
Bending Angle (°) 0-180°
Bending Speed (Sec) 5.0-6.0 s
Machine Dimensions(L×W×H) (mm) 500×450×790mm
Net Weight (Kg) 136Kg
Gross Weight (Kg) 150 Kg
 
Model SP5216B-I
Drilling capacity Ø16mm (5/8")
Motor power 375/450/550W
Chuck Capacity 3-16mm
Spindle stroke 60mm
Class Of Speed 16
Speed 60Hz 180~2770/220~3020 R.P.M
Spindle taper NT2
Auto-feeding step of worktable 162.5mm
Max. distance from spindle end to surface of table 450mm
Max. distance from spindle end to surface of base 630mm
Swing 325mm
Table size Ø290mm
Base Size 420×250mm
Column Diameter Ø72mm
Height 980mm
N.W./G.W. 42/45kg
model BL270
Distance between centers 700 mm
Swing over bed 250 mm
Swing over cross slide 130 mm
Taper of spindle bore MT4
Spindle bore 27 mm
Number of spindle speeds Variable
Range of spindle speeds 115-1620 rpm
Range of metric threads 20/0.2-3.5 mm,
Range of inch threads 20/8-56 T.P.I
Motor 550 w
Top slide travel 50 mm
Cross slide travel 120 mm
Tailstock quill travel 50 mm
Tailstock quill Taper MT2
Packing size 1580×680×880 mm
Net weight 225 kg
Mill & drill
Max.drilling dia 16mm
Max.end milling capacity 20mm
Max.face milling capacity 50mm
Vertical travel 220mm
Taper of spindle bore MT2
Spindle travel 50mm
Spindle speed 50-2250 rpm
Motor for (drill/mill) 600 w
model BL200G
Swing over bed 200mm
Distance between Centers 520mm
MAX swing diameter over middle carriage 150mm
Spindle bore 20mm
Headstock taper MT3
Metric thread range 0.4-3mm
Range of longitudinal feeds 0.05-0.2mm/rev
Tailstock Taper MT2
Spindle speed 140-1710rpm
Electric motor 550W
Net weight 105KG
Overall dimension 104×55×41mm
model SP-D3121S
Max.Drilling capacity (mm) 40
Diameter of column (mm) 160
Spindle travel (mm) 180
Distance spindle axis to column generating line (mm) 360
Max.Distance spindle nose to table (mm) 600
Max.Distance spindle nose to table (mm) 1215
Spindle taper MT4
Spindle speeds range (r/min) 42-2050
Spindle speeds series 12
Spindle feeds 4 (r/min) 0.07,0.15,0.25,0.40
Dimension of worktable surface (mm) 460×450
Table travel (mm) 560
Dimension of base table (mm) 510×380
Overall height (mm) 2310
Main motor (KW) 2.2/2.8
Coolant motor (KW) 0.024
G.W/N. W (kg) 800/730
 
 
Model TAB-LM500
CAPACITY
Max.swing over bed 500mm
Max.swing over carriage 260mm
Max. swing over gap 710mm
Distance between centers 1000/1500/2000/3000mm
Bed width 405mm
SPINDLE
Spindle nose D8
Spindle bore 80mm
Taper bore of spindle M.T.NO.7
Steps of spindle speed 24
Range of spindle speed 9~1600rpm
FEED
Range of longitudinal feeds 0.063~6.43 (0.0023"~0.2392") mm
Range of cross feeds 0.027~2.73(0.0010"~0.1016") mm
RAPID TRAVEL
Longitudinal 4500mm/min
Cross 1900mm/min
THREAD RANGE/ NUMBER
Metric pitch threads 1~224mm/ 46
Whit-worth threads 28~1/8 TPI/ 26
Module threads 0.5~112mm/ 42
D.P. Threads 56~1/4 DP/ 45
TAILSTOCK SLEEVE
Taper bore M.T.NO.5
Max. travel 150(5~29/32") mm
External diameter 75(2~61/64") mm
OTHERS
Size of tool shank 25×25mm
Max travel of cross slide 360mm
Max. travel of top slide 145mm
Main motor power 7.5kw (10HP)
Overall dimensions(L×W×H) (2500/3000/3500/4500) ×900×1259mm
Net weight 2750/3000/3250/3600kg
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information