| Description | Description
Utilizing the principle of converting hydraulic energy into mechanical energy, a tool for disassembling and assembling track pins of a crawler excavator. High-flow manual reversing pump (suitable for field operations), electric pumps (380V) as the power source to quickly move the hydraulic cylinder forward, thereby smoothly removing the pin. Instead of gas cutting, manual hammering. Keep the tracks intact and free from damage. It is a tool for track excavator maintenance and assembly. | Features
- The worktable is rotatable and equipped with horizontal and lifting mechanisms for inclined planning which enlarges its using scope.
- It is convenient to adjust feedings and change tool paths by adopting a cam mechanism as a feeding system.
- The machine has protections inside the tool path system against overloading due to the careless operation or external influences.
- The blade will slide automatically, and non-destructive parts will work to ensure the normal operation of the machine.
- The ram, rail bed, speeding gear, and major sliding guide are all lubricated by the oil pump.
- The machine adopts a parking brake mechanism; therefore, it is unnecessary to cut off electric power when changing speed, starting, and stopping the machine.
| Features:
- The roller adopts high strength and high life solid bearing roller with long time and small deformation.
- The driving gear adopts forging high carbon steel, high hardness, and wear-resisting solid property.
- The whole machine adopts integral steel plate welding, thick and beautiful, and the stability is good.
- Simple operation, a single person can work independently
| Description
Hydraulic round bending machine with hydraulic motor
both Vertical and horizontal bending
Features:
- Horizontal and vertical operation
- With the standard foot pedal
- Special cast frame+
- Shafts are hardened with special steel material
- Rollers are special steel material hardened and grounded
- Gears Milled with full material
- HRBM40HV with hydraulic control
| Descriptions
Used for thin metal plate rolling
Features:
1. The roller adopts high strength and high life solid bearing roller with long time and small deformation.
2. The driving gear adopts forging high carbon steel, high hardness, and strong wear-resisting property.
3. The whole machine adopts integral steel plate welding, thick and beautiful, and the stability is good.
4. Simple operation, a single person can work independently | Description
It uses compressed air as a power source (air pressure is adjustable)
It is used for riveting rivets of all kinds of brake shoes\brake disc\brake drum\brake lining \ brake pads
Features:
- It uses an air source; it is safe to operate
- It is suitable for heavy-duty truck brake linings
- Pressure can be adjusted according to the size of the rivets
- With oil and water separator
- With grease filling holes
- The pedal room is big
- With a cabinet for accessories
|
| Content |
| Model |
120TON |
| Motor power: |
1.5KW |
| Voltage: |
380V-60Hz |
| Working pressure: |
0-63Mpa |
| Working flow: |
1.2L / min |
| Fuel tank capacity (L): |
16L |
| Medium: |
46 # hydraulic oil |
| Hydraulic cylinder thrust |
120T |
| Stroke, |
200mm |
|
| model |
TAB-S6066 |
| Maximum cutting length(mm) |
660 |
| Maximum distance from ram bottom to table surface(mm) |
385 |
| Maximum table horizontal travel(mm) |
660 |
| Maximum table vertical travel(mm) |
360 |
| Dimensions of table top surface(L×W)(mm) |
630×400 |
| Travel of tool head(mm) |
120 |
| Number of ram strokes per minute |
14, 20, 28, 40, 56, 80 |
| Swivel of tool head(°) |
±60° |
| Maximum size of tool shank(W×T)(mm) |
20×30 |
| Range of table power feed(mm) |
horizontal |
0.2~2.5 |
| vertical |
18 |
| Width of central T-slot of table(mm) |
18 |
| Power of mortr(kw) |
3 |
| Overall dimensions(L×W×H)(mm) |
2000×1300×1550 |
| N.W/G.W(kg) |
1750/1870 |
|
| Manual Metal Sheet Rolling Machine 0.8mm×1000mm |
| Model |
Max thickness of Plate(mm) |
Max width of Plate(mm) |
Dia.of upper roller(mm) |
Dia.of side roller(mm) |
Weight (kg) |
Overall Dimension (mm) |
| 0.8×1000 |
0.8 |
1000 |
50 |
80 |
105 |
1480×350×500 |
|
| Model |
HRBM40HV |
| Motor power |
1.5 kW |
| Leading roller speed |
9.3 r/min |
| Roller shaft diameter |
40 mm |
| Dimensions machine |
1340×930×1850 mm |
| Net weight |
490 kg |
|
| Manual Metal Sheet Rolling Machine1.50mm×1300mm |
| Model |
Max thickness of Plate(mm) |
Max width of Plate(mm) |
Dia.of upper roller(mm) |
Dia.of side roller(mm) |
Weight (kg) |
Overall Dimension (mm) |
| 1.50×1300 |
1.5 |
1300 |
72 |
80 |
225 |
1800×550×1170 |
|
| Model no |
SP-8001 |
| Material |
Metal plate |
| Painting |
High-quality paint |
| Color |
Blue |
| Max rivet force |
60KN(6T) |
| Working air pressure |
0.5-0.8Mpa (Adjustable) |
| Suitable rivet diameter |
10mm |
| Stroke of the riveter |
40mm |
| Height adjust distance of the shoe iron bracket |
20mm |
| Packing sizes |
N.W: 69KG |
| G.W: 101KG |
| 580×540×1440mm |
|
