| Description | Description
SP2121 560×2000mm engine lathe machine can be with spindle speed 12 steps or variable speed.
It is an affordable universal lathe machine.
This manual lathe machine could be an 80mm or 103mm spindle bore.
Now we have developed a new specification for the lathe machine with an automatic lubrication system.
Features:
- The spindle bore is supported with precision roller bearings.
- A removable gap is provided for larger diameter work and easy operating gear box can be various feeds and thread cutting.
- An overload safety device is designed on the apron.
- Carriage rapid feed with clutch is available.
- Easy operating speed change levers
| Description
The shearing machine adopts the sliding guide rail, tension spring using sliding stationary, reducing the operating force by two-thirds, the shearing and machine can be equipped with a pressure loading device, high shearing quality, and lightweight, mobile convenience features. It is widely used in the sheet metal industry human cut material, the machine tool made of high alloy tool steel, edge durability.
Features:
- The Manual shear is with a fully welded steel structure and high strength.
- Strong cutting capability, and reduction of labor intensity.
- The height of the foot pedal is low, easy operation.
- Used for mild steel, aluminum copper, brass, zinc, plastic, and leads.
- High carbon and chrome steel blade.
| Features:
- The roller adopts high strength and high life solid bearing roller with long time and small deformation.
- The driving gear adopts forging high carbon steel, high hardness, and wear-resisting solid property.
- The whole machine adopts integral steel plate welding, thick and beautiful, and the stability is good.
- Simple operation, a single person can work independently
| Description
It uses compressed air as a power source (air pressure is adjustable)
It is used for riveting rivets of all kinds of brake shoes\brake disc\brake drum\brake lining \ brake pads
Features:
- It uses an air source; it is safe to operate
- It is suitable for heavy-duty truck brake linings
- Pressure can be adjusted according to the size of the rivets
- With oil and water separator
- With grease filling holes
- The pedal room is big
- With a cabinet for accessories
| Description
Hydraulic round bending machine with hydraulic motor
both Vertical and horizontal bending
Features:
- Horizontal and vertical operation
- With the standard foot pedal
- Special cast frame+
- Shafts are hardened with special steel material
- Rollers are special steel material hardened and grounded
- Gears Milled with full material
- HRBM40HV with hydraulic control
| Description
TAB-ECP16 eccentric press is a suitable open type of crank press featuring a left and right open type machine body (i.e., a C-shaped machine body). Its steel plate welded body has a high shock-absorbing performance. Its novel overall design gives the machine an elegant appearance. Its throat has a certain depth. The compact structure makes the use convenient and operation safe. The punch press is equipped with a turn-key rigid clutch, a cam band brake, and a press-down type safety device. Its working table is open on three sides, so the mold loading and unloading, and operation are convenient. The punch press is widely used because it provides good conditions for mechanization and automation. And as the main equipment for plate punching production, the punch press can be used for punching holes, blanking, trimming, bending, shallow stretching, and forming. |
| Content |
| Model |
SP2121 560×2000mm |
| Swing over bed |
560mm |
| Swing over cross slide |
355mm |
| Swing in gap |
785 |
| Length of gap |
170 |
| Distance between center |
2000 |
| Center height |
280mm |
| Width of bed |
350mm |
| Spindle hole |
80 / 103mm |
| Max. section of tool |
25×25mm |
| Max travel of cross slide |
316mm |
| Max. travel of compound rest |
130mm |
| Spindle bore |
80mm/103mm (optional) |
| Spindle nose |
D1-8 |
| Taper of Spindle bore |
No.7 Morse |
| Spindle speed step |
12 |
| Range of spindle speed |
25-1000rpm |
| Leadscrew pitch |
6mm or 4 TPI |
| Inch threads range |
60kinds 2-112TPI |
| Metric threads range |
47 kinds 0.2-14mm |
| Diamerical pitches range |
50 kinds 4-112DP |
| Module pitches range |
34kinds 0.1-7MP |
| Tailstock sleeve taper/diameter/travel |
MT5/75/180mm |
| Main drive motor: |
7.5 KW(10HP) |
| Rapid traverse motor |
250W |
| Coolant pump motor |
0.1kw (1/8HP), 3PH |
| Cross feeds range |
42kinds 0.020-0.573mm32kinds |
| Longitudinal feeds range |
0.059-1.646mm/rev |
| Overall dimension(L*W*H) |
4350x1150x1500mm |
| Packing size(L*W*H) |
4425x1150x1600mm |
| Net Weight |
2720 kg |
| Gross Weight |
3150 kg |
|
| Model |
Max thickness of Plate(mm) |
Max width of Plate(mm) |
Back gauge range(mm) |
G. weight/N. weight(kg) |
Overall Dimension (mm) |
| 1.25×2000 |
1.25 |
2000 |
0-700 |
600/511 |
2390 x 600 x 960 |
|
| Manual Metal Sheet Rolling Machine 0.8mm×1000mm |
| Model |
Max thickness of Plate(mm) |
Max width of Plate(mm) |
Dia.of upper roller(mm) |
Dia.of side roller(mm) |
Weight (kg) |
Overall Dimension (mm) |
| 0.8×1000 |
0.8 |
1000 |
50 |
80 |
105 |
1480×350×500 |
|
| Model no |
SP-8001 |
| Material |
Metal plate |
| Painting |
High-quality paint |
| Color |
Blue |
| Max rivet force |
60KN(6T) |
| Working air pressure |
0.5-0.8Mpa (Adjustable) |
| Suitable rivet diameter |
10mm |
| Stroke of the riveter |
40mm |
| Height adjust distance of the shoe iron bracket |
20mm |
| Packing sizes |
N.W: 69KG |
| G.W: 101KG |
| 580×540×1440mm |
|
| Model |
HRBM40HV |
| Motor power |
1.5 kW |
| Leading roller speed |
9.3 r/min |
| Roller shaft diameter |
40 mm |
| Dimensions machine |
1340×930×1850 mm |
| Net weight |
490 kg |
|
| Model |
Unit |
TAB-ECP16 |
| Nominal Pressure |
kn |
160 |
| Strokes per Minute |
Spm |
110 |
| Max.Die Height |
mm |
190 |
| Die Height Adjustment |
mm |
40 |
| Throat Depth |
mm |
160 |
| Bolster Surface |
Front to Rear |
mm |
280 |
| Left to Right |
mm |
450 |
| Blanking hole |
mm |
100 |
| Distance between Uprights |
mm |
160 |
| Thickness of Bolster |
mm |
60 |
| Inclinable Angle |
degree |
40 |
| Motor Power |
kw |
1.5 |
| Overall Dimension |
F.B. |
mm |
800 |
| L.R. |
mm |
670 |
| Height |
mm |
1700 |
|
