| Description | Description
TAB-BS2240 High-Quality Horizontal metal cutting bandsaw is one of our most economic and durable horizontal metal cutting bandsaw machine
Features:
- The maximum processing capability of BAND SAW is 9"(229mm)
- High-capacity due to controlled by motor
- Can rotate from 0° to 45°
- Has the advantage of quickly clamping.
- Features a belt driven and has four cutting speeds.
- The falling speed of the saw bow is controlled by a hydraulic cylinder
- With a power break protection device, the machine will power off automatically when the rear protective cover is opened
- With coolant system, can prolong the service life of the saw blade and improve the precision of the workpiece
- Has a block feeder (with fixed sawing length)
| Description
TAB-ECP80 eccentric press is a suitable open type of crank press featuring a left and right open type machine body (i.e., a C-shaped machine body). Its steel plate welded body has a high shock-absorbing performance. Its novel overall design gives the machine an elegant appearance. Its throat has a certain depth. The compact structure makes the use convenient and operation safe. The punch press is equipped with a turn-key rigid clutch, a cam band brake, and a press-down type safety device. Its working table is open on three sides, so the mold loading and unloading, and operation are convenient. The punch press is widely used because it provides good conditions for mechanization and automation. And as the main equipment for plate punching production, the punch press can be used for punching holes, blanking, trimming, bending, shallow stretching, and forming. | Description
Hydraulic round bending machine with hydraulic motor
both Vertical and horizontal bending
Features:
- Horizontal and vertical operation
- With the standard foot pedal
- Special cast frame+
- Shafts are hardened with special steel material
- Rollers are special steel material hardened and grounded
- Gears Milled with full material
- HRBM50HV with hydraulic control
| Description
Hydraulic round bending machine with hydraulic motor
both Vertical and horizontal bending
Features:
- Horizontal and vertical operation
- With the standard foot pedal
- Special cast frame+
- Shafts are hardened with special steel material
- Rollers are special steel material hardened and grounded
- Gears Milled with full material
- HRBM40HV with hydraulic control
| Description
This SP3103 machine is a step-less timing vertical drilling machine with a wide belt, light in weight small in volume easy to operate, safe, and reliable.
It is a universal machine that could be widely used for small and middle-sized workpieces or drilling spot facing, reaming, tapping, etc.
And it also could equip many kinds of accessories, to extend machining function and usage area.
Digital speeds screen installed
These machines are suitable for machining workshops, maintenance workshops, and mini-type workshops. | Description
TAB-ECP40 eccentric press is a suitable open type of crank press featuring a left and right open type machine body (i.e., a C-shaped machine body). Its steel plate welded body has a high shock-absorbing performance. Its novel overall design gives the machine an elegant appearance. Its throat has a certain depth. The compact structure makes the use convenient and operation safe. The punch press is equipped with a turn-key rigid clutch, a cam band brake, and a press-down type safety device. Its working table is open on three sides, so the mold loading and unloading, and operation are convenient. The punch press is widely used because it provides good conditions for mechanization and automation. And as the main equipment for plate punching production, the punch press can be used for punching holes, blanking, trimming, bending, shallow stretching, and forming. |
| Content |
| Model |
BS2240 |
| Cutting Capacity (mm) |
Round 220 |
| Square 400W x 100H |
| Blade speed (mm/min ) - 21/34/43/60 |
| Blade Size (mm) |
27x0.9x3330 |
| Main Motor (kW) |
1.5 |
| Water pump Motor (w) |
60 |
| Feeding Speed |
Stepless |
| Workpiece clamping |
Manual |
| Blade Tensioning |
Manual |
| Main Drive |
Wormwheel Drive |
| Table height (mm) |
300 |
| Size outward (mm) |
1750×780×1130 |
|
| Model |
Unit |
TAB-ECP80 |
| Nominal Pressure |
kn |
800 |
| Travel of slip block |
mm |
120 |
| Frequency of travel |
Frequency/minute |
40 |
| Enclosed height |
mm |
70 |
| Maximum adjustment of enclosed height |
mm |
60 |
| Distance from center of slip block to press body |
mm |
90 |
| Size of shank holes diameter |
mm |
60 |
| Bolster Surface |
Front to Rear |
mm |
480 |
| Left to Right |
mm |
750 |
| Size of shank holes depth |
mm |
70 |
| Distance between columns |
mm |
300 |
| Mold Height |
mm |
250 |
| Motor Power |
kw |
5.5 |
| Overall Dimensions |
F.R. |
mm |
1790 |
| L.R. |
mm |
1420 |
| Height |
mm |
2550 |
|
| Model |
HRBM50HV |
| Motor power |
2,2 kW |
| Leading roller speed |
13 r/min |
| Roller shaft diameter |
50 mm |
| Dimensions machine |
1500×950×1340 mm |
| Net weight |
515 kg |
|
| Model |
HRBM40HV |
| Motor power |
1.5 kW |
| Leading roller speed |
9.3 r/min |
| Roller shaft diameter |
40 mm |
| Dimensions machine |
1340×930×1850 mm |
| Net weight |
490 kg |
|
| Model |
SP3103 |
| Max. drilling diameter (steel) |
25mm |
| Max. taping diameter (steel) |
M12mm |
| Max. stroke of the spindle |
110mm |
| Distance between spindle center line to the generating line of column |
230mm |
| Max. distance between spindle end to the surface of the worktable |
690mm |
| Max. distance between spindle end to the worktable surface of the base |
1180mm |
| Max. stroke of worktable and its bracket |
555mm |
| Spindle taper bore |
MT3 |
| Number of speed steps of the spindle |
Stepless |
| Spindle speed range |
80 ~ 1600 r/min |
| Working area of the worktable (L x W) |
400×320mm |
| Working area of the worktable of the base(L x W) |
340×320mm |
| Diameter of column |
100mm |
| Power of the main power |
0.55/0.85kw |
| Machine dimension (L×B×H) |
820×530×1715mm |
| Packing dimension(L×B×H) |
860×580×1800mm |
| Net weight/gross weight |
245/280kg |
|
| Model |
Unit |
TAB-ECP40 |
| Nominal Pressure |
kn |
400 |
| Travel of slip block |
mm |
100 |
| Frequency of travel |
Frequency/minute |
50 |
| Enclosed height |
mm |
70 |
| Maximum adjustment of enclosed height |
mm |
60 |
| Distance from center of slip block to press body |
mm |
230 |
| Size of shank holes diameter |
mm |
50 |
| Bolster Surface |
Front to Rear |
mm |
410 |
| Left to Right |
mm |
640 |
| Size of shank holes depth |
mm |
70 |
| Distance between columns |
mm |
320 |
| Thickness of plate of workbench |
mm |
80 |
| Mold Height |
mm |
230 |
| Maximum tilt angle of press body |
degree |
15 |
| Motor Power |
kw |
3 |
| Overall Dimension |
F.B. |
mm |
1400 |
| L.R. |
mm |
1200 |
| Height |
mm |
2450 |
|
