The worktable is rotatable and equipped with horizontal and lifting mechanisms for inclined planning which enlarges its using scope.
It is convenient to adjust feedings and change tool path by adopting cam mechanism as feeding system.
The machine has protections inside the tool path system against overloading due to careless operation or external influences. The blade will slide automatically, non-destructive parts will work to ensure the normal operation of the machine.
The ram, rail bed, speeding gear and major sliding guide are all lubricated by the oil pump.
The machine adopts parking brake mechanism; therefore, it is unnecessary to cut off electric power when changing speed, starting and stopping the machine.
The worktable is rotatable and equipped with horizontal and lifting mechanisms for inclined planning which enlarges its using scope.
It is convenient to adjust feedings and change tool path by adopting cam mechanism as feeding system.
The machine has protections inside the tool path system against overloading due to careless operation or external influences. The blade will slide automatically, non-destructive parts will work to ensure the normal operation of the machine.
The ram, rail bed, speeding gear and major sliding guide are all lubricated by the oil pump.
The machine adopts parking brake mechanism; therefore, it is unnecessary to cut off electric power when changing speed, starting and stopping the machine.
Description
LIGHT duty H-frame pneumatic and manual hydraulic press is an excellent choice for small workshops and is ideal for straightening, bending, and removing/installing gears, bearings, and bushings.
Features:
Easy to use.
Pressure gauge installed.
Lever installed.
Operating fast by using the pneumatic system.
Descriptions
Round bending machine both Vertical and horizontal bending
Features:
Horizontal and vertical operation
With standard foot pedal
Special cast frame+
Shafts are hardened with special steel material
Rollers are special steel material hardened and grounded
Gears Milled with full material
Description
TAB-ECP6.3-1 eccentric press is a suitable open type of crank press featuring a left and right open type machine body (i.e., a C-shaped machine body). Its steel plate welded body has a high shock-absorbing performance. Its novel overall design gives the machine an elegant appearance. Its throat has a certain depth. The compact structure makes the use convenient and operation safe. The punch press is equipped with a turn-key rigid clutch, a cam band brake, and a press-down type safety device. Its working table is open on three sides, so the mold loading and unloading, and operation are convenient. The punch press is widely used because it provides good conditions for mechanization and automation. And as the main equipment for plate punching production, the punch press can be used for punching holes, blanking, trimming, bending, shallow stretching, and forming.
Description
It uses compressed air as a power source (air pressure is adjustable)
It is used for riveting rivets of all kinds of brake shoes\brake disc\brake drum\brake lining \ brake pads
Features:
It uses an air source; it is safe to operate
It is suitable for heavy-duty truck brake linings
Pressure can be adjusted according to the size of the rivets
With oil and water separator
With grease filling holes
The pedal room is big
With a cabinet for accessories
Description
The Bending machine adopts the sliding guide rail, and tension spring using sliding stationary, reducing the operating force by two-thirds, the bending, machine can be equipped with a pressure loading device, high shearing quality, and lightweight, mobile convenience features. It is widely used in the sheet metal industry, the machine tool made of high alloy tool steel, edge durability.
Features:
Manual bending is with a fully welded steel structure and high strength.
Strong bending capability, and reduction of labor intensity.
Foot pedal can extend and shorten freely.
The height of the foot pedal is low, easy operation.
Used for mild steel, aluminum copper, brass zinc plastic, leads High carbon, and chrome steel blade
Content
Model
TAB-S6050
Max Shaping Length (mm)
500
The Max. Distance of Ram Bottom to Worktable Plane (mm)
370
The Max. Horizontal Movement of Worktable (mm)
525
The Max. Vertical Movement of Worktable (mm)
270
Worktable Size (L*W) (mm)
440/360
Tool Post Travel (mm)
120
Ram Strokes per Minute
14, 20, 28, 40, 56, 80
Max. Rotational Angel of Tool Post (°)
±60°
The Max. Size of Planing Tool Handle (Width*Thick) (mm)
