| Description | Features and Advantages
- The worktable is rotatable and equipped with horizontal and lifting mechanisms for inclined planning which enlarges its using scope.
- It is convenient to adjust feedings and change tool path by adopting cam mechanism as feeding system.
- The machine has protections inside the tool path system against overloading due to careless operation or external influences. The blade will slide automatically, non-destructive parts will work to ensure the normal operation of the machine.
- The ram, rail bed, speeding gear and major sliding guide are all lubricated by the oil pump.
- The machine adopts parking brake mechanism; therefore, it is unnecessary to cut off electric power when changing speed, starting and stopping the machine.
| Descriptions
Used for thin metal plate rolling
Features:
1. The roller adopts high strength and high life solid bearing roller with long time and small deformation.
2. The driving gear adopts forging high carbon steel, high hardness, and strong wear-resisting property.
3. The whole machine adopts integral steel plate welding, thick and beautiful, and the stability is good.
4. Simple operation, a single person can work independently | Description
TAB-ECP10 eccentric press is a suitable open type of crank press featuring a left and right open type machine body (i.e., a C-shaped machine body). Its steel plate welded body has a high shock-absorbing performance. Its novel overall design gives the machine an elegant appearance. Its throat has a certain depth. The compact structure makes the use convenient and operation safe. The punch press is equipped with a turn-key rigid clutch, a cam band brake, and a press-down type safety device. Its working table is open on three sides, so the mold loading and unloading, and operation are convenient. The punch press is widely used because it provides good conditions for mechanization and automation. And as the main equipment for plate punching production, the punch press can be used for punching holes, blanking, trimming, bending, shallow stretching, and forming. | Description
TAB-ECP80 eccentric press is a suitable open type of crank press featuring a left and right open type machine body (i.e., a C-shaped machine body). Its steel plate welded body has a high shock-absorbing performance. Its novel overall design gives the machine an elegant appearance. Its throat has a certain depth. The compact structure makes the use convenient and operation safe. The punch press is equipped with a turn-key rigid clutch, a cam band brake, and a press-down type safety device. Its working table is open on three sides, so the mold loading and unloading, and operation are convenient. The punch press is widely used because it provides good conditions for mechanization and automation. And as the main equipment for plate punching production, the punch press can be used for punching holes, blanking, trimming, bending, shallow stretching, and forming. | Description
TAB-ECP25 eccentric press is a suitable open type of crank press featuring a left and right open type machine body (i.e., a C-shaped machine body). Its steel plate welded body has a high shock-absorbing performance. Its novel overall design gives the machine an elegant appearance. Its throat has a certain depth. The compact structure makes the use convenient and operation safe. The punch press is equipped with a turn-key rigid clutch, a cam band brake, and a press-down type safety device. Its working table is open on three sides, so the mold loading and unloading, and operation are convenient. The punch press is widely used because it provides good conditions for mechanization and automation. And as the main equipment for plate punching production, the punch press can be used for punching holes, blanking, trimming, bending, shallow stretching, and forming. | Description
Hydraulic round bending machine with hydraulic motor
both Vertical and horizontal bending
Features:
- Horizontal and vertical operation
- With the standard foot pedal
- Special cast frame+
- Shafts are hardened with special steel material
- Rollers are special steel material hardened and grounded
- Gears Milled with full material
- HRBM50HV with hydraulic control
|
| Content |
| Model |
TAB-S6050 |
| Max Shaping Length (mm) |
500 |
| The Max. Distance of Ram Bottom to Worktable Plane (mm) |
370 |
| The Max. Horizontal Movement of Worktable (mm) |
525 |
| The Max. Vertical Movement of Worktable (mm) |
270 |
| Worktable Size (L*W) (mm) |
440/360 |
| Tool Post Travel (mm) |
120 |
| Ram Strokes per Minute |
14, 20, 28, 40, 56, 80 |
| Max. Rotational Angel of Tool Post (°) |
±60° |
| The Max. Size of Planing Tool Handle (Width*Thick) (mm) |
20×30 |
| Mechanical Feeding Range of Worktable |
Horizontal Feeding (12 Grades) (mm) |
0.2~2.5 |
| Vertical Feeding (12 Grades) (mm) |
18mm |
| Size of Worktable Central T-slot (mm) |
32 50 80 128 times/min |
| Main Motor (kw) |
3 |
| Overall Size (L*W*H) (mm) |
2160×1070×1194 |
| Net Weight/Gross Weight (kg) |
1650/1760 |
|
| Manual Metal Sheet Rolling Machine1.50mm×1300mm |
| Model |
Max thickness of Plate(mm) |
Max width of Plate(mm) |
Dia.of upper roller(mm) |
Dia.of side roller(mm) |
Weight (kg) |
Overall Dimension (mm) |
| 1.50×1300 |
1.5 |
1300 |
72 |
80 |
225 |
1800×550×1170 |
|
| Model |
Unit |
TAB-ECP10 |
| Nominal Pressure |
kn |
100 |
| Slide Stroke |
mm |
50 |
| Strokes per Minute |
Spm |
120 |
| Max.Die Height |
mm |
150 |
| Die Height Adjustment |
mm |
30 |
| Throat Depth |
mm |
125 |
| Bolster Surface |
Front to Rear |
mm |
220 |
| Left to Right |
mm |
340 |
| Blanking hole |
mm |
90 |
| Distance between Uprights |
mm |
125 |
| Thickness of Bolster |
mm |
50 |
| Inclinable Angle |
degree |
30 |
| Motor Power |
kw |
1.5 |
| Overall Dimension |
F.B. |
mm |
610 |
| L.R. |
mm |
550 |
| Height |
mm |
1400 |
|
| Model |
Unit |
TAB-ECP80 |
| Nominal Pressure |
kn |
800 |
| Travel of slip block |
mm |
120 |
| Frequency of travel |
Frequency/minute |
40 |
| Enclosed height |
mm |
70 |
| Maximum adjustment of enclosed height |
mm |
60 |
| Distance from center of slip block to press body |
mm |
90 |
| Size of shank holes diameter |
mm |
60 |
| Bolster Surface |
Front to Rear |
mm |
480 |
| Left to Right |
mm |
750 |
| Size of shank holes depth |
mm |
70 |
| Distance between columns |
mm |
300 |
| Mold Height |
mm |
250 |
| Motor Power |
kw |
5.5 |
| Overall Dimensions |
F.R. |
mm |
1790 |
| L.R. |
mm |
1420 |
| Height |
mm |
2550 |
|
| Model |
Unit |
TAB-ECP25 |
| Nominal Pressure |
kn |
250 |
| Travel of slip block |
mm |
70 |
| Frequency of travel |
Frequency/minute |
40 |
| Enclosed height |
mm |
70 |
| Maximum adjustment of enclosed height |
mm |
60 |
| Distance from center of slip block to press body |
mm |
180 |
| Size of shank holes diameter |
mm |
40 |
| Bolster Surface |
Front to Rear |
mm |
520 |
| Left to Right |
mm |
330 |
| Size of shank holes depth |
mm |
60 |
| Distance between Uprights |
mm |
160 |
| Thickness of plate of workbench |
mm |
170 |
| Motor Power |
kw |
2.2 |
| Overall Dimension |
F.B. |
mm |
910 |
| L.R. |
mm |
700 |
| Height |
mm |
1800 |
|
| Model |
HRBM50HV |
| Motor power |
2,2 kW |
| Leading roller speed |
13 r/min |
| Roller shaft diameter |
50 mm |
| Dimensions machine |
1500×950×1340 mm |
| Net weight |
515 kg |
|
