| Description | Features:
- This machine is with universal milling head, it can swivel 360 degrees.
- The table can swivel left and right side 35 degrees.
- The machine can automatically feed on three axes controlled through one gearbox.
- The ram is movable forward and backward.
- The table can be extended to 1600mm, and X travel is increased to 1300mm simultaneously.
- The machine is equipped with an operation panel which is convenient for the operator.
| Description
TAB-ECP80 eccentric press is a suitable open type of crank press featuring a left and right open type machine body (i.e., a C-shaped machine body). Its steel plate welded body has a high shock-absorbing performance. Its novel overall design gives the machine an elegant appearance. Its throat has a certain depth. The compact structure makes the use convenient and operation safe. The punch press is equipped with a turn-key rigid clutch, a cam band brake, and a press-down type safety device. Its working table is open on three sides, so the mold loading and unloading, and operation are convenient. The punch press is widely used because it provides good conditions for mechanization and automation. And as the main equipment for plate punching production, the punch press can be used for punching holes, blanking, trimming, bending, shallow stretching, and forming. | Description
It uses compressed air as a power source (air pressure is adjustable)
It is used for riveting rivets of all kinds of brake shoes\brake disc\brake drum\brake lining \ brake pads
Features:
- It uses an air source; it is safe to operate
- It is suitable for heavy-duty truck brake linings
- Pressure can be adjusted according to the size of the rivets
- With oil and water separator
- With grease filling holes
- The pedal room is big
- With a cabinet for accessories
| Features
- The worktable is rotatable and equipped with horizontal and lifting mechanisms for inclined planning which enlarges its using scope.
- It is convenient to adjust feedings and change tool paths by adopting a cam mechanism as a feeding system.
- The machine has protections inside the tool path system against overloading due to the careless operation or external influences.
- The blade will slide automatically, and non-destructive parts will work to ensure the normal operation of the machine.
- The ram, rail bed, speeding gear, and major sliding guide are all lubricated by the oil pump.
- The machine adopts a parking brake mechanism; therefore, it is unnecessary to cut off electric power when changing speed, starting, and stopping the machine.
| Description
The Bending machine adopts the sliding guide rail, and tension spring using sliding stationary, reducing the operating force by two-thirds, the bending, machine can be equipped with a pressure loading device, high shearing quality, and lightweight, mobile convenience features. It is widely used in the sheet metal industry, the machine tool made of high alloy tool steel, edge durability.
Features:
- Manual bending is with a fully welded steel structure and high strength.
- Strong bending capability, and reduction of labor intensity.
- Foot pedal can extend and shorten freely.
- The height of the foot pedal is low, easy operation.
Used for mild steel, aluminum copper, brass zinc plastic, leads High carbon, and chrome steel blade | Description
TAB-ECP40 eccentric press is a suitable open type of crank press featuring a left and right open type machine body (i.e., a C-shaped machine body). Its steel plate welded body has a high shock-absorbing performance. Its novel overall design gives the machine an elegant appearance. Its throat has a certain depth. The compact structure makes the use convenient and operation safe. The punch press is equipped with a turn-key rigid clutch, a cam band brake, and a press-down type safety device. Its working table is open on three sides, so the mold loading and unloading, and operation are convenient. The punch press is widely used because it provides good conditions for mechanization and automation. And as the main equipment for plate punching production, the punch press can be used for punching holes, blanking, trimming, bending, shallow stretching, and forming. |
| Content |
| Model |
Unit |
SPUM6436 |
| Table size |
mm |
1650x360 |
| T slot |
no |
5 |
| T Slot Size ( Width ) |
mm |
14 |
| Centre distance |
mm |
95 |
| Max. load of Table |
kg |
400 |
| swivel of table |
degree |
±45º |
| MACHINING RANGE |
| X axis table Longitudinal travel(manual/auto) |
mm |
1300 |
| Y axis table Cross travel (manual/auto) |
mm |
290/280 |
| Z axis table Vertical travel(manual/auto) |
mm |
390 |
| MAIN SPINDLE |
| Spindle taper |
|
ISO50 |
| Spindle speed /step -- Vertical |
rpm |
58-1800/12 |
| Spindle speed /step --Horizontal |
rpm |
38-1310/12 |
| Swivel angle of swivel head |
degree |
360º |
| Vertical spindle nose to table surface |
mm |
168-568 |
| Horizontal spindle axis to table surface |
mm |
0-390 |
| Horizontal spindle axis to arm bottom |
mm |
175 |
| Arm travel |
mm |
500 |
| FEEDS |
| X /Y Longitudinal/cross feed |
mm / min |
22-420(X), 22-393(Y) |
| Z Vertical feeding rate |
mm/min |
10-168(Z) |
| X/Y Longitudinal/cross rapid speed |
mm / min |
1290(X),1205(Y) |
| Z Rapid Traverse vertical |
mm/min |
513(Z) |
| POWER |
| Main motor |
kw |
4 |
| (X/Y/Z) feed motor |
kw |
1.1KW |
| Coolant motor |
kw |
90W |
| Other |
| Overall dimension |
cm |
198x202x190 |
| N/W,G/W |
kg |
2600/2800 |
|
| Model |
Unit |
TAB-ECP80 |
| Nominal Pressure |
kn |
800 |
| Travel of slip block |
mm |
120 |
| Frequency of travel |
Frequency/minute |
40 |
| Enclosed height |
mm |
70 |
| Maximum adjustment of enclosed height |
mm |
60 |
| Distance from center of slip block to press body |
mm |
90 |
| Size of shank holes diameter |
mm |
60 |
| Bolster Surface |
Front to Rear |
mm |
480 |
| Left to Right |
mm |
750 |
| Size of shank holes depth |
mm |
70 |
| Distance between columns |
mm |
300 |
| Mold Height |
mm |
250 |
| Motor Power |
kw |
5.5 |
| Overall Dimensions |
F.R. |
mm |
1790 |
| L.R. |
mm |
1420 |
| Height |
mm |
2550 |
|
| Model no |
TAB-8001 |
| Material |
Metal plate |
| Painting |
High-quality paint |
| Color |
Yellow |
| Max rivet force |
60KN(6T) |
| Working air pressure |
0.5-0.8Mpa (Adjustable) |
| Suitable rivet diameter |
10mm |
| Stroke of the riveter |
40mm |
| Height adjust distance of the shoe iron bracket |
20mm |
| Packing sizes |
N.W: 69KG |
| G.W: 101KG |
| 580×540×1440mm |
|
| model |
TAB-S6066 |
| Maximum cutting length(mm) |
660 |
| Maximum distance from ram bottom to table surface(mm) |
385 |
| Maximum table horizontal travel(mm) |
660 |
| Maximum table vertical travel(mm) |
360 |
| Dimensions of table top surface(L×W)(mm) |
630×400 |
| Travel of tool head(mm) |
120 |
| Number of ram strokes per minute |
14, 20, 28, 40, 56, 80 |
| Swivel of tool head(°) |
±60° |
| Maximum size of tool shank(W×T)(mm) |
20×30 |
| Range of table power feed(mm) |
horizontal |
0.2~2.5 |
| vertical |
18 |
| Width of central T-slot of table(mm) |
18 |
| Power of mortr(kw) |
3 |
| Overall dimensions(L×W×H)(mm) |
2000×1300×1550 |
| N.W/G.W(kg) |
1750/1870 |
|
| Title |
Values |
| Model |
2×1300 |
| Max thickness of Plate(mm) |
2 |
| Max width of Plate(mm) |
1300 |
| Back gauge range(mm) |
0-700 |
| Weight (kg) |
545 |
| Overall Dimension (mm) |
1680×760×1150 |
|
| Model |
Unit |
TAB-ECP40 |
| Nominal Pressure |
kn |
400 |
| Travel of slip block |
mm |
100 |
| Frequency of travel |
Frequency/minute |
50 |
| Enclosed height |
mm |
70 |
| Maximum adjustment of enclosed height |
mm |
60 |
| Distance from center of slip block to press body |
mm |
230 |
| Size of shank holes diameter |
mm |
50 |
| Bolster Surface |
Front to Rear |
mm |
410 |
| Left to Right |
mm |
640 |
| Size of shank holes depth |
mm |
70 |
| Distance between columns |
mm |
320 |
| Thickness of plate of workbench |
mm |
80 |
| Mold Height |
mm |
230 |
| Maximum tilt angle of press body |
degree |
15 |
| Motor Power |
kw |
3 |
| Overall Dimension |
F.B. |
mm |
1400 |
| L.R. |
mm |
1200 |
| Height |
mm |
2450 |
|
