| Description | Description
Hydraulic round bending machine with hydraulic motor
both Vertical and horizontal bending
Features:
- Horizontal and vertical operation
- With the standard foot pedal
- Special cast frame+
- Shafts are hardened with special steel material
- Rollers are special steel material hardened and grounded
- Gears Milled with full material
- HRBM50HV with hydraulic control
| Features:
- The roller adopts high strength and high life solid bearing roller with long time and small deformation.
- The driving gear adopts forging high carbon steel, high hardness, and wear-resisting solid property.
- The whole machine adopts integral steel plate welding, thick and beautiful, and the stability is good.
- Simple operation, a single person can work independently
| Description
The Bending machine adopts the sliding guide rail, and tension spring using sliding stationary, reducing the operating force by two-thirds, the bending, machine can be equipped with a pressure loading device, high shearing quality, and lightweight, mobile convenience features. It is widely used in the sheet metal industry, the machine tool made of high alloy tool steel, edge durability.
Features:
- Manual bending is with a fully welded steel structure and high strength.
- Strong bending capability, and reduction of labor intensity.
- Foot pedal can extend and shorten freely.
- The height of the foot pedal is low, easy operation.
Used for mild steel, aluminum copper, brass zinc plastic, leads High carbon, and chrome steel blade | Descriptions
Used for thin metal plate rolling
Features:
1. The roller adopts high strength and high life solid bearing roller with long time and small deformation.
2. The driving gear adopts forging high carbon steel, high hardness, and strong wear-resisting property.
3. The whole machine adopts integral steel plate welding, thick and beautiful, and the stability is good.
4. Simple operation, a single person can work independently | Descriptions
Steel Bar Cutting Machine RC40, improves compressive strength and plasticity, overcoming the disadvantages of low plasticity, and low compressive strength. The crankshaft adopts 45# steel as material, with high efficiency. | Description
TAB-ECP25 eccentric press is a suitable open type of crank press featuring a left and right open type machine body (i.e., a C-shaped machine body). Its steel plate welded body has a high shock-absorbing performance. Its novel overall design gives the machine an elegant appearance. Its throat has a certain depth. The compact structure makes the use convenient and operation safe. The punch press is equipped with a turn-key rigid clutch, a cam band brake, and a press-down type safety device. Its working table is open on three sides, so the mold loading and unloading, and operation are convenient. The punch press is widely used because it provides good conditions for mechanization and automation. And as the main equipment for plate punching production, the punch press can be used for punching holes, blanking, trimming, bending, shallow stretching, and forming. |
| Content |
| Model |
HRBM50HV |
| Motor power |
2,2 kW |
| Leading roller speed |
13 r/min |
| Roller shaft diameter |
50 mm |
| Dimensions machine |
1500×950×1340 mm |
| Net weight |
515 kg |
|
| Manual Metal Sheet Rolling Machine 0.8mm×1000mm |
| Model |
Max thickness of Plate(mm) |
Max width of Plate(mm) |
Dia.of upper roller(mm) |
Dia.of side roller(mm) |
Weight (kg) |
Overall Dimension (mm) |
| 0.8×1000 |
0.8 |
1000 |
50 |
80 |
105 |
1480×350×500 |
|
| Title |
Values |
| Model |
2×1300 |
| Max thickness of Plate(mm) |
2 |
| Max width of Plate(mm) |
1300 |
| Back gauge range(mm) |
0-700 |
| Weight (kg) |
545 |
| Overall Dimension (mm) |
1680×760×1150 |
|
| Manual Metal Sheet Rolling Machine1.50mm×1300mm |
| Model |
Max thickness of Plate(mm) |
Max width of Plate(mm) |
Dia.of upper roller(mm) |
Dia.of side roller(mm) |
Weight (kg) |
Overall Dimension (mm) |
| 1.50×1300 |
1.5 |
1300 |
72 |
80 |
225 |
1800×550×1170 |
|
| model |
Steel Bar Cutting Machine RC40 |
| SPEED OF PRINCIPAL AXIS |
32r/min |
| MAX.SIZE OF FLAT BAR |
70×15mm |
| MAX.SIZE OF ANGEL BAR |
50×50mm |
| MAX.SIZE OF SQUARE BAR |
32×32mm |
| POWER OF MOTOR |
3KW |
| SPEED OF MOTOR |
2880r/min |
| VOLTAGE |
380V/220V |
| DIMENSION |
1320×490×850mm |
| WEIGHT |
340KG |
|
| Model |
Unit |
TAB-ECP25 |
| Nominal Pressure |
kn |
250 |
| Travel of slip block |
mm |
70 |
| Frequency of travel |
Frequency/minute |
40 |
| Enclosed height |
mm |
70 |
| Maximum adjustment of enclosed height |
mm |
60 |
| Distance from center of slip block to press body |
mm |
180 |
| Size of shank holes diameter |
mm |
40 |
| Bolster Surface |
Front to Rear |
mm |
520 |
| Left to Right |
mm |
330 |
| Size of shank holes depth |
mm |
60 |
| Distance between Uprights |
mm |
160 |
| Thickness of plate of workbench |
mm |
170 |
| Motor Power |
kw |
2.2 |
| Overall Dimension |
F.B. |
mm |
910 |
| L.R. |
mm |
700 |
| Height |
mm |
1800 |
|
