Description | Description:
This equipment T8465 is a kind of lathe. It can fulfill the reparation of the brake drum, disc, and shoe of automobiles from mini-car to medium trucks.
Features:
- The unusual feature of this equipment is its twin spindle each other perpendicular structure.
- The brake drum/shoe can be cut on the first spindle and the brake disc can be cut on the second spindle.
- This equipment has higher rigidity, accurate workpiece positioning, and is easy to operate.
| Description
TAB-ECP80 eccentric press is a suitable open type of crank press featuring a left and right open type machine body (i.e., a C-shaped machine body). Its steel plate welded body has a high shock-absorbing performance. Its novel overall design gives the machine an elegant appearance. Its throat has a certain depth. The compact structure makes the use convenient and operation safe. The punch press is equipped with a turn-key rigid clutch, a cam band brake, and a press-down type safety device. Its working table is open on three sides, so the mold loading and unloading, and operation are convenient. The punch press is widely used because it provides good conditions for mechanization and automation. And as the main equipment for plate punching production, the punch press can be used for punching holes, blanking, trimming, bending, shallow stretching, and forming. | Description
TAB-ECP63 electric press is a suitable open type of crank press featuring a left and right open type machine body (i.e., a C-shaped machine body). Its steel plate welded body has a high shock-absorbing performance. Its novel overall design gives the machine an elegant appearance. Its throat has a certain depth. The compact structure makes the use convenient and operation safe. The punch press is equipped with a turn-key rigid clutch, a cam band brake, and a press-down type safety device. Its working table is open on three sides, so the mold loading and unloading, and operation are convenient. The punch press is widely used because it provides good conditions for mechanization and automation. And as the main equipment for plate punching production, the punch press can be used for punching holes, blanking, trimming, bending, shallow stretching, and forming. | Description
TAB-ECP25 eccentric press is a suitable open type of crank press featuring a left and right open type machine body (i.e., a C-shaped machine body). Its steel plate welded body has a high shock-absorbing performance. Its novel overall design gives the machine an elegant appearance. Its throat has a certain depth. The compact structure makes the use convenient and operation safe. The punch press is equipped with a turn-key rigid clutch, a cam band brake, and a press-down type safety device. Its working table is open on three sides, so the mold loading and unloading, and operation are convenient. The punch press is widely used because it provides good conditions for mechanization and automation. And as the main equipment for plate punching production, the punch press can be used for punching holes, blanking, trimming, bending, shallow stretching, and forming. | Descriptions
Round bending machine both Vertical and horizontal bending
Features:
- Horizontal and vertical operation
- With standard foot pedal
- Special cast frame+
- Shafts are hardened with special steel material
- Rollers are special steel material hardened and grounded
- Gears Milled with full material
| Description
The Bending machine adopts the sliding guide rail, and tension spring using sliding stationary, reducing the operating force by two-thirds, the bending, machine can be equipped with a pressure loading device, high shearing quality, and lightweight, mobile convenience features. It is widely used in the sheet metal industry, the machine tool made of high alloy tool steel, edge durability.
Features:
- Manual bending is with a fully welded steel structure and high strength.
- Strong bending capability, and reduction of labor intensity.
- Foot pedal can extend and shorten freely.
- The height of the foot pedal is low, easy operation.
Used for mild steel, aluminum copper, brass zinc plastic, leads High carbon, and chrome steel blade |
Content |
Model |
T8465 |
Processing Diameter for Brake Drum |
180-650mm |
Processing Diameter for Brake Disc |
102-500mm |
Rotating Speed of Workpiece |
30/52/85 r/min |
Max. Travel of Tool |
250mm |
Feeding Rate |
0.16mm/r |
Packing Dimensions (L/W/H) |
800/875/1050mm |
Net Weight |
390kgs |
Motor Power |
1.1kw |
|
Model |
Unit |
TAB-ECP80 |
Nominal Pressure |
kn |
800 |
Travel of slip block |
mm |
120 |
Frequency of travel |
Frequency/minute |
40 |
Enclosed height |
mm |
70 |
Maximum adjustment of enclosed height |
mm |
60 |
Distance from center of slip block to press body |
mm |
90 |
Size of shank holes diameter |
mm |
60 |
Bolster Surface |
Front to Rear |
mm |
480 |
Left to Right |
mm |
750 |
Size of shank holes depth |
mm |
70 |
Distance between columns |
mm |
300 |
Mold Height |
mm |
250 |
Motor Power |
kw |
5.5 |
Overall Dimensions |
F.R. |
mm |
1790 |
L.R. |
mm |
1420 |
Height |
mm |
2550 |
|
Model |
Unit |
TAB-ECP63 |
Nominal Pressure |
kn |
630 |
Travel of slip block |
mm |
100 |
Frequency of travel |
Frequency/minute |
50 |
Enclosed height |
mm |
70 |
Maximum adjustment of enclosed height |
mm |
80 |
Distance from center of slip block to press body |
mm |
230 |
Size of shank holes diameter |
mm |
50 |
Bolster Surface |
Front to Rear |
mm |
450 |
Left to Right |
mm |
700 |
Size of shank holes depth |
mm |
70 |
Distance between columns |
mm |
370 |
Mold Height |
mm |
220 |
Motor Power |
kw |
5.5 |
Overall Dimensions |
F.R. |
mm |
1800 |
L.R. |
mm |
1500 |
Height |
mm |
2650 |
|
Model |
Unit |
TAB-ECP25 |
Nominal Pressure |
kn |
250 |
Travel of slip block |
mm |
70 |
Frequency of travel |
Frequency/minute |
40 |
Enclosed height |
mm |
70 |
Maximum adjustment of enclosed height |
mm |
60 |
Distance from center of slip block to press body |
mm |
180 |
Size of shank holes diameter |
mm |
40 |
Bolster Surface |
Front to Rear |
mm |
520 |
Left to Right |
mm |
330 |
Size of shank holes depth |
mm |
60 |
Distance between Uprights |
mm |
160 |
Thickness of plate of workbench |
mm |
170 |
Motor Power |
kw |
2.2 |
Overall Dimension |
F.B. |
mm |
910 |
L.R. |
mm |
700 |
Height |
mm |
1800 |
|
model |
Pipe Bending Machine RBM30HV |
Motor power |
1.1 kW |
Leading roller speed |
9 r/min |
Roller shaft diameter |
30 mm |
Dimensions machine |
820×620×1260 mm |
Net weight |
282 kg |
|
Title |
Values |
Model |
2×1300 |
Max thickness of Plate(mm) |
2 |
Max width of Plate(mm) |
1300 |
Back gauge range(mm) |
0-700 |
Weight (kg) |
545 |
Overall Dimension (mm) |
1680×760×1150 |
|