| Description | Features
- The worktable is rotatable and equipped with horizontal and lifting mechanisms for inclined planning which enlarges its using scope.
- It is convenient to adjust feedings and change tool paths by adopting a cam mechanism as a feeding system.
- The machine has protections inside the tool path system against overloading due to the careless operation or external influences.
- The blade will slide automatically, and non-destructive parts will work to ensure the normal operation of the machine.
- The ram, rail bed, speeding gear, and major sliding guide are all lubricated by the oil pump.
- The machine adopts a parking brake mechanism; therefore, it is unnecessary to cut off electric power when changing speed, starting, and stopping the machine.
| Description
TAB-ECP6.3-1 eccentric press is a suitable open type of crank press featuring a left and right open type machine body (i.e., a C-shaped machine body). Its steel plate welded body has a high shock-absorbing performance. Its novel overall design gives the machine an elegant appearance. Its throat has a certain depth. The compact structure makes the use convenient and operation safe. The punch press is equipped with a turn-key rigid clutch, a cam band brake, and a press-down type safety device. Its working table is open on three sides, so the mold loading and unloading, and operation are convenient. The punch press is widely used because it provides good conditions for mechanization and automation. And as the main equipment for plate punching production, the punch press can be used for punching holes, blanking, trimming, bending, shallow stretching, and forming. | Description
Hydraulic round bending machine with hydraulic motor
both Vertical and horizontal bending
Features:
- Horizontal and vertical operation
- With the standard foot pedal
- Special cast frame+
- Shafts are hardened with special steel material
- Rollers are special steel material hardened and grounded
- Gears Milled with full material
- HRBM40HV with hydraulic control
| Description
TAB-ECP25 eccentric press is a suitable open type of crank press featuring a left and right open type machine body (i.e., a C-shaped machine body). Its steel plate welded body has a high shock-absorbing performance. Its novel overall design gives the machine an elegant appearance. Its throat has a certain depth. The compact structure makes the use convenient and operation safe. The punch press is equipped with a turn-key rigid clutch, a cam band brake, and a press-down type safety device. Its working table is open on three sides, so the mold loading and unloading, and operation are convenient. The punch press is widely used because it provides good conditions for mechanization and automation. And as the main equipment for plate punching production, the punch press can be used for punching holes, blanking, trimming, bending, shallow stretching, and forming. | Description
The Bending machine adopts the sliding guide rail, and tension spring using sliding stationary, reducing the operating force by two-thirds, the bending, machine can be equipped with a pressure loading device, high shearing quality, and lightweight, mobile convenience features. It is widely used in the sheet metal industry, the machine tool made of high alloy tool steel, edge durability.
Features:
- Manual bending is with a fully welded steel structure and high strength.
- Strong bending capability, and reduction of labor intensity.
- Foot pedal can extend and shorten freely.
- The height of the foot pedal is low, easy operation.
Used for mild steel, aluminum copper, brass zinc plastic, leads High carbon, and chrome steel blade | Descriptions
Used for thin metal plate rolling
Features:
1. The roller adopts high strength and high life solid bearing roller with long time and small deformation.
2. The driving gear adopts forging high carbon steel, high hardness, and strong wear-resisting property.
3. The whole machine adopts integral steel plate welding, thick and beautiful, and the stability is good.
4. Simple operation, a single person can work independently |
| Content |
| model |
TAB-S6066 |
| Maximum cutting length(mm) |
660 |
| Maximum distance from ram bottom to table surface(mm) |
385 |
| Maximum table horizontal travel(mm) |
660 |
| Maximum table vertical travel(mm) |
360 |
| Dimensions of table top surface(L×W)(mm) |
630×400 |
| Travel of tool head(mm) |
120 |
| Number of ram strokes per minute |
14, 20, 28, 40, 56, 80 |
| Swivel of tool head(°) |
±60° |
| Maximum size of tool shank(W×T)(mm) |
20×30 |
| Range of table power feed(mm) |
horizontal |
0.2~2.5 |
| vertical |
18 |
| Width of central T-slot of table(mm) |
18 |
| Power of mortr(kw) |
3 |
| Overall dimensions(L×W×H)(mm) |
2000×1300×1550 |
| N.W/G.W(kg) |
1750/1870 |
|
| Model |
Unit |
TAB-ECP6.3 |
| Nominal Pressure |
kn |
63 |
| Travel of slip block |
mm |
40 |
| Frequency of travel |
Frequency/minute |
50 |
| Enclosed height |
mm |
70 |
| Maximum adjustment of enclosed height |
mm |
30 |
| Distance from center of slip block to press body |
mm |
190 |
| Size of shank holes diameter |
mm |
70 |
| Bolster Surface |
Front to Rear |
mm |
200 |
| Left to Right |
mm |
340 |
| Size of shank holes depth |
mm |
70 |
| Distance between columns |
mm |
120 |
| Thickness of plate of workbench |
mm |
30 |
| Mold Height |
mm |
190 |
| Maximum tilt angle of press body |
degree |
20 |
| Motor Power |
kw |
0.75 |
| Overall Dimension |
F.B. |
mm |
400 |
| L.R. |
mm |
500 |
| Height |
mm |
1300 |
|
| Model |
HRBM40HV |
| Motor power |
1.5 kW |
| Leading roller speed |
9.3 r/min |
| Roller shaft diameter |
40 mm |
| Dimensions machine |
1340×930×1850 mm |
| Net weight |
490 kg |
|
| Model |
Unit |
TAB-ECP25 |
| Nominal Pressure |
kn |
250 |
| Travel of slip block |
mm |
70 |
| Frequency of travel |
Frequency/minute |
40 |
| Enclosed height |
mm |
70 |
| Maximum adjustment of enclosed height |
mm |
60 |
| Distance from center of slip block to press body |
mm |
180 |
| Size of shank holes diameter |
mm |
40 |
| Bolster Surface |
Front to Rear |
mm |
520 |
| Left to Right |
mm |
330 |
| Size of shank holes depth |
mm |
60 |
| Distance between Uprights |
mm |
160 |
| Thickness of plate of workbench |
mm |
170 |
| Motor Power |
kw |
2.2 |
| Overall Dimension |
F.B. |
mm |
910 |
| L.R. |
mm |
700 |
| Height |
mm |
1800 |
|
| Title |
Values |
| Model |
2×1300 |
| Max thickness of Plate(mm) |
2 |
| Max width of Plate(mm) |
1300 |
| Back gauge range(mm) |
0-700 |
| Weight (kg) |
545 |
| Overall Dimension (mm) |
1680×760×1150 |
|
| Manual Metal Sheet Rolling Machine1.50mm×1300mm |
| Model |
Max thickness of Plate(mm) |
Max width of Plate(mm) |
Dia.of upper roller(mm) |
Dia.of side roller(mm) |
Weight (kg) |
Overall Dimension (mm) |
| 1.50×1300 |
1.5 |
1300 |
72 |
80 |
225 |
1800×550×1170 |
|
