| Description | Description
Utilizing the principle of converting hydraulic energy into mechanical energy, a tool for disassembling and assembling track pins of a crawler excavator. High-flow manual reversing pump (suitable for field operations), electric pumps (380V) as the power source to quickly move the hydraulic cylinder forward, thereby smoothly removing the pin. Instead of gas cutting, manual hammering. Keep the tracks intact and free from damage. It is a tool for track excavator maintenance and assembly. | Description
TAB-ECP80 eccentric press is a suitable open type of crank press featuring a left and right open type machine body (i.e., a C-shaped machine body). Its steel plate welded body has a high shock-absorbing performance. Its novel overall design gives the machine an elegant appearance. Its throat has a certain depth. The compact structure makes the use convenient and operation safe. The punch press is equipped with a turn-key rigid clutch, a cam band brake, and a press-down type safety device. Its working table is open on three sides, so the mold loading and unloading, and operation are convenient. The punch press is widely used because it provides good conditions for mechanization and automation. And as the main equipment for plate punching production, the punch press can be used for punching holes, blanking, trimming, bending, shallow stretching, and forming. | Description
TAB-BS2240 High-Quality Horizontal metal cutting bandsaw is one of our most economic and durable horizontal metal cutting bandsaw machine
Features:
- The maximum processing capability of BAND SAW is 9"(229mm)
- High-capacity due to controlled by motor
- Can rotate from 0° to 45°
- Has the advantage of quickly clamping.
- Features a belt driven and has four cutting speeds.
- The falling speed of the saw bow is controlled by a hydraulic cylinder
- With a power break protection device, the machine will power off automatically when the rear protective cover is opened
- With coolant system, can prolong the service life of the saw blade and improve the precision of the workpiece
- Has a block feeder (with fixed sawing length)
| Description
TAB-ECP25 eccentric press is a suitable open type of crank press featuring a left and right open type machine body (i.e., a C-shaped machine body). Its steel plate welded body has a high shock-absorbing performance. Its novel overall design gives the machine an elegant appearance. Its throat has a certain depth. The compact structure makes the use convenient and operation safe. The punch press is equipped with a turn-key rigid clutch, a cam band brake, and a press-down type safety device. Its working table is open on three sides, so the mold loading and unloading, and operation are convenient. The punch press is widely used because it provides good conditions for mechanization and automation. And as the main equipment for plate punching production, the punch press can be used for punching holes, blanking, trimming, bending, shallow stretching, and forming. | Description
TAB-ECP63 electric press is a suitable open type of crank press featuring a left and right open type machine body (i.e., a C-shaped machine body). Its steel plate welded body has a high shock-absorbing performance. Its novel overall design gives the machine an elegant appearance. Its throat has a certain depth. The compact structure makes the use convenient and operation safe. The punch press is equipped with a turn-key rigid clutch, a cam band brake, and a press-down type safety device. Its working table is open on three sides, so the mold loading and unloading, and operation are convenient. The punch press is widely used because it provides good conditions for mechanization and automation. And as the main equipment for plate punching production, the punch press can be used for punching holes, blanking, trimming, bending, shallow stretching, and forming. | Features
- The worktable is rotatable and equipped with horizontal and lifting mechanisms for inclined planning which enlarges its using scope.
- It is convenient to adjust feedings and change tool paths by adopting a cam mechanism as a feeding system.
- The machine has protections inside the tool path system against overloading due to the careless operation or external influences.
- The blade will slide automatically, and non-destructive parts will work to ensure the normal operation of the machine.
- The ram, rail bed, speeding gear, and major sliding guide are all lubricated by the oil pump.
- The machine adopts a parking brake mechanism; therefore, it is unnecessary to cut off electric power when changing speed, starting, and stopping the machine.
|
| Content |
| Model |
160TON |
| Motor power: |
1.5KW |
| Voltage: |
380V-60Hz |
| Working pressure: |
0-63Mpa |
| Working flow: |
1.2L / min |
| Fuel tank capacity (L): |
16L |
| Medium: |
46 # hydraulic oil |
| Hydraulic cylinder thrust |
160T |
| Stroke, |
200mm |
|
| Model |
Unit |
TAB-ECP80 |
| Nominal Pressure |
kn |
800 |
| Travel of slip block |
mm |
120 |
| Frequency of travel |
Frequency/minute |
40 |
| Enclosed height |
mm |
70 |
| Maximum adjustment of enclosed height |
mm |
60 |
| Distance from center of slip block to press body |
mm |
90 |
| Size of shank holes diameter |
mm |
60 |
| Bolster Surface |
Front to Rear |
mm |
480 |
| Left to Right |
mm |
750 |
| Size of shank holes depth |
mm |
70 |
| Distance between columns |
mm |
300 |
| Mold Height |
mm |
250 |
| Motor Power |
kw |
5.5 |
| Overall Dimensions |
F.R. |
mm |
1790 |
| L.R. |
mm |
1420 |
| Height |
mm |
2550 |
|
| Model |
BS2240 |
| Cutting Capacity (mm) |
Round 220 |
| Square 400W x 100H |
| Blade speed (mm/min ) - 21/34/43/60 |
| Blade Size (mm) |
27x0.9x3330 |
| Main Motor (kW) |
1.5 |
| Water pump Motor (w) |
60 |
| Feeding Speed |
Stepless |
| Workpiece clamping |
Manual |
| Blade Tensioning |
Manual |
| Main Drive |
Wormwheel Drive |
| Table height (mm) |
300 |
| Size outward (mm) |
1750×780×1130 |
|
| Model |
Unit |
TAB-ECP25 |
| Nominal Pressure |
kn |
250 |
| Travel of slip block |
mm |
70 |
| Frequency of travel |
Frequency/minute |
40 |
| Enclosed height |
mm |
70 |
| Maximum adjustment of enclosed height |
mm |
60 |
| Distance from center of slip block to press body |
mm |
180 |
| Size of shank holes diameter |
mm |
40 |
| Bolster Surface |
Front to Rear |
mm |
520 |
| Left to Right |
mm |
330 |
| Size of shank holes depth |
mm |
60 |
| Distance between Uprights |
mm |
160 |
| Thickness of plate of workbench |
mm |
170 |
| Motor Power |
kw |
2.2 |
| Overall Dimension |
F.B. |
mm |
910 |
| L.R. |
mm |
700 |
| Height |
mm |
1800 |
|
| Model |
Unit |
TAB-ECP63 |
| Nominal Pressure |
kn |
630 |
| Travel of slip block |
mm |
100 |
| Frequency of travel |
Frequency/minute |
50 |
| Enclosed height |
mm |
70 |
| Maximum adjustment of enclosed height |
mm |
80 |
| Distance from center of slip block to press body |
mm |
230 |
| Size of shank holes diameter |
mm |
50 |
| Bolster Surface |
Front to Rear |
mm |
450 |
| Left to Right |
mm |
700 |
| Size of shank holes depth |
mm |
70 |
| Distance between columns |
mm |
370 |
| Mold Height |
mm |
220 |
| Motor Power |
kw |
5.5 |
| Overall Dimensions |
F.R. |
mm |
1800 |
| L.R. |
mm |
1500 |
| Height |
mm |
2650 |
|
| model |
TAB-S6066 |
| Maximum cutting length(mm) |
660 |
| Maximum distance from ram bottom to table surface(mm) |
385 |
| Maximum table horizontal travel(mm) |
660 |
| Maximum table vertical travel(mm) |
360 |
| Dimensions of table top surface(L×W)(mm) |
630×400 |
| Travel of tool head(mm) |
120 |
| Number of ram strokes per minute |
14, 20, 28, 40, 56, 80 |
| Swivel of tool head(°) |
±60° |
| Maximum size of tool shank(W×T)(mm) |
20×30 |
| Range of table power feed(mm) |
horizontal |
0.2~2.5 |
| vertical |
18 |
| Width of central T-slot of table(mm) |
18 |
| Power of mortr(kw) |
3 |
| Overall dimensions(L×W×H)(mm) |
2000×1300×1550 |
| N.W/G.W(kg) |
1750/1870 |
|
