Description | Features:
- The Brake Drum Boring Machine is suitable for processing the brake drum, brake shoe, and brake plate of various domestic and foreign cars and sedans.
- Have the advantages of, rational structure, easy operating, good rigidity, high cutting speed, safe, reliability, and multipurpose.
- The T8360A is better suitable for repairing/boring the brake drum and brake piece of the large or medium size vehicle.
- In the accessories of T8360A, there are universal hub-heads, coupling plates, and locating plates to assist the brake drum in position leaning on the retaining ledge, and the brake drum also can be bored depending on the hub-head in the brake drum.
| Descriptions
Round bending machine both Vertical and horizontal bending
Features:
- Horizontal and vertical operation
- With standard foot pedal
- Special cast frame+
- Shafts are hardened with special steel material
- Rollers are special steel material hardened and grounded
- Gears Milled with full material
| Descriptions
Round bending machine both Vertical and horizontal bending
Features:
- Horizontal and vertical operation
- With standard foot pedal
- Special cast frame+
- Shafts are hardened with special steel material
- Rollers are special steel material hardened and grounded
- Gears Milled with full material
| Description
TAB-ECP25 eccentric press is a suitable open type of crank press featuring a left and right open type machine body (i.e., a C-shaped machine body). Its steel plate welded body has a high shock-absorbing performance. Its novel overall design gives the machine an elegant appearance. Its throat has a certain depth. The compact structure makes the use convenient and operation safe. The punch press is equipped with a turn-key rigid clutch, a cam band brake, and a press-down type safety device. Its working table is open on three sides, so the mold loading and unloading, and operation are convenient. The punch press is widely used because it provides good conditions for mechanization and automation. And as the main equipment for plate punching production, the punch press can be used for punching holes, blanking, trimming, bending, shallow stretching, and forming. | Description
Hydraulic round bending machine with hydraulic motor
both Vertical and horizontal bending
Features:
- Horizontal and vertical operation
- With the standard foot pedal
- Special cast frame+
- Shafts are hardened with special steel material
- Rollers are special steel material hardened and grounded
- Gears Milled with full material
- HRBM40HV with hydraulic control
| Features
- The worktable is rotatable and equipped with horizontal and lifting mechanisms for inclined planning which enlarges its using scope.
- It is convenient to adjust feedings and change tool paths by adopting a cam mechanism as a feeding system.
- The machine has protections inside the tool path system against overloading due to the careless operation or external influences.
- The blade will slide automatically, and non-destructive parts will work to ensure the normal operation of the machine.
- The ram, rail bed, speeding gear, and major sliding guide are all lubricated by the oil pump.
- The machine adopts a parking brake mechanism; therefore, it is unnecessary to cut off electric power when changing speed, starting, and stopping the machine.
|
Content |
Model |
T8360A |
Range of processing diameter |
200-600mm |
Rotating speed of workpiece |
36 48 r/min |
Max slide travel |
450mm |
Rapid tool lift speed |
300mm/min |
Feed range |
0.2- 0.04mm/r
(4 steps) |
Motor |
1.1kw |
Overall dimensions (LxWxH) |
1500×960×940mm |
Weight |
800/900kg |
|
model |
Pipe Bending Machine RBM30HV |
Motor power |
1.1 kW |
Leading roller speed |
9 r/min |
Roller shaft diameter |
30 mm |
Dimensions machine |
820×620×1260 mm |
Net weight |
282 kg |
|
model |
Pipe Bending Machine RBM40HV |
Motor power |
1.5 kW |
Leading roller speed |
9.3 r/min |
Roller shaft diameter |
40 mm |
Dimensions machine |
1400×950×1340 mm |
Net weight |
425 kg |
|
Model |
Unit |
TAB-ECP25 |
Nominal Pressure |
kn |
250 |
Travel of slip block |
mm |
70 |
Frequency of travel |
Frequency/minute |
40 |
Enclosed height |
mm |
70 |
Maximum adjustment of enclosed height |
mm |
60 |
Distance from center of slip block to press body |
mm |
180 |
Size of shank holes diameter |
mm |
40 |
Bolster Surface |
Front to Rear |
mm |
520 |
Left to Right |
mm |
330 |
Size of shank holes depth |
mm |
60 |
Distance between Uprights |
mm |
160 |
Thickness of plate of workbench |
mm |
170 |
Motor Power |
kw |
2.2 |
Overall Dimension |
F.B. |
mm |
910 |
L.R. |
mm |
700 |
Height |
mm |
1800 |
|
Model |
HRBM40HV |
Motor power |
1.5 kW |
Leading roller speed |
9.3 r/min |
Roller shaft diameter |
40 mm |
Dimensions machine |
1340×930×1850 mm |
Net weight |
490 kg |
|
model |
TAB-S6066 |
Maximum cutting length(mm) |
660 |
Maximum distance from ram bottom to table surface(mm) |
385 |
Maximum table horizontal travel(mm) |
660 |
Maximum table vertical travel(mm) |
360 |
Dimensions of table top surface(L×W)(mm) |
630×400 |
Travel of tool head(mm) |
120 |
Number of ram strokes per minute |
14、20、28、40、56、80 |
Swivel of tool head(°) |
±60° |
Maximum size of tool shank(W×T)(mm) |
20×30 |
Range of table power feed(mm) |
horizontal |
0.2~2.5 |
vertical |
18 |
Width of central T-slot of table(mm) |
18 |
Power of mortr(kw) |
3 |
Overall dimensions(L×W×H)(mm) |
2000×1300×1550 |
N.W/G.W(kg) |
1750/1870 |
|