| Description | Features:
- The machine adopts unilateral open transmission, Low energy consumption, safe and reliable.
- simple and compact structure, flexible and reliable operation, Maintenance convenience.
- Widely used in motors, electrical appliances, automobile repair, metal manufacturing, and all of its sheet metal processing
industry.
- the electric shearing machine/electrical cutting machine is made of all-steel welded construction.
- Uses electric motor drive, blade made of hard material
- Widely used in motor, electrical, automobile industries and all shops of other industries where sheet metal cutting is required.
- Simple construction, easy operation, and safe, sensitive, and reliable control
- Easy maintenance, low energy consumption
| Description
TAB-ECP25 eccentric press is a suitable open type of crank press featuring a left and right open type machine body (i.e., a C-shaped machine body). Its steel plate welded body has a high shock-absorbing performance. Its novel overall design gives the machine an elegant appearance. Its throat has a certain depth. The compact structure makes the use convenient and operation safe. The punch press is equipped with a turn-key rigid clutch, a cam band brake, and a press-down type safety device. Its working table is open on three sides, so the mold loading and unloading, and operation are convenient. The punch press is widely used because it provides good conditions for mechanization and automation. And as the main equipment for plate punching production, the punch press can be used for punching holes, blanking, trimming, bending, shallow stretching, and forming. | Description
TAB-ECP10 eccentric press is a suitable open type of crank press featuring a left and right open type machine body (i.e., a C-shaped machine body). Its steel plate welded body has a high shock-absorbing performance. Its novel overall design gives the machine an elegant appearance. Its throat has a certain depth. The compact structure makes the use convenient and operation safe. The punch press is equipped with a turn-key rigid clutch, a cam band brake, and a press-down type safety device. Its working table is open on three sides, so the mold loading and unloading, and operation are convenient. The punch press is widely used because it provides good conditions for mechanization and automation. And as the main equipment for plate punching production, the punch press can be used for punching holes, blanking, trimming, bending, shallow stretching, and forming. | Description
TAB-ECP40 eccentric press is a suitable open type of crank press featuring a left and right open type machine body (i.e., a C-shaped machine body). Its steel plate welded body has a high shock-absorbing performance. Its novel overall design gives the machine an elegant appearance. Its throat has a certain depth. The compact structure makes the use convenient and operation safe. The punch press is equipped with a turn-key rigid clutch, a cam band brake, and a press-down type safety device. Its working table is open on three sides, so the mold loading and unloading, and operation are convenient. The punch press is widely used because it provides good conditions for mechanization and automation. And as the main equipment for plate punching production, the punch press can be used for punching holes, blanking, trimming, bending, shallow stretching, and forming. | Description
Hydraulic round bending machine with hydraulic motor
both Vertical and horizontal bending
Features:
- Horizontal and vertical operation
- With the standard foot pedal
- Special cast frame+
- Shafts are hardened with special steel material
- Rollers are special steel material hardened and grounded
- Gears Milled with full material
- HRBM40HV with hydraulic control
| Descriptions
Round bending machine both Vertical and horizontal bending
Features:
- Horizontal and vertical operation
- With standard foot pedal
- Special cast frame+
- Shafts are hardened with special steel material
- Rollers are special steel material hardened and grounded
- Gears Milled with full material
|
| Content |
| Model |
3x2000 |
| Cutting thickness |
3mm |
| Cutting width |
2000mm |
| Share angle |
2°14' |
| Stroke |
33mm |
| Back gauge range |
500mm |
| Motor power |
5.5 kW |
| Overall dimensions |
2600x1050x1150 |
|
| Model |
Unit |
TAB-ECP25 |
| Nominal Pressure |
kn |
250 |
| Travel of slip block |
mm |
70 |
| Frequency of travel |
Frequency/minute |
40 |
| Enclosed height |
mm |
70 |
| Maximum adjustment of enclosed height |
mm |
60 |
| Distance from center of slip block to press body |
mm |
180 |
| Size of shank holes diameter |
mm |
40 |
| Bolster Surface |
Front to Rear |
mm |
520 |
| Left to Right |
mm |
330 |
| Size of shank holes depth |
mm |
60 |
| Distance between Uprights |
mm |
160 |
| Thickness of plate of workbench |
mm |
170 |
| Motor Power |
kw |
2.2 |
| Overall Dimension |
F.B. |
mm |
910 |
| L.R. |
mm |
700 |
| Height |
mm |
1800 |
|
| Model |
Unit |
TAB-ECP10 |
| Nominal Pressure |
kn |
100 |
| Slide Stroke |
mm |
50 |
| Strokes per Minute |
Spm |
120 |
| Max.Die Height |
mm |
150 |
| Die Height Adjustment |
mm |
30 |
| Throat Depth |
mm |
125 |
| Bolster Surface |
Front to Rear |
mm |
220 |
| Left to Right |
mm |
340 |
| Blanking hole |
mm |
90 |
| Distance between Uprights |
mm |
125 |
| Thickness of Bolster |
mm |
50 |
| Inclinable Angle |
degree |
30 |
| Motor Power |
kw |
1.5 |
| Overall Dimension |
F.B. |
mm |
610 |
| L.R. |
mm |
550 |
| Height |
mm |
1400 |
|
| Model |
Unit |
TAB-ECP40 |
| Nominal Pressure |
kn |
400 |
| Travel of slip block |
mm |
100 |
| Frequency of travel |
Frequency/minute |
50 |
| Enclosed height |
mm |
70 |
| Maximum adjustment of enclosed height |
mm |
60 |
| Distance from center of slip block to press body |
mm |
230 |
| Size of shank holes diameter |
mm |
50 |
| Bolster Surface |
Front to Rear |
mm |
410 |
| Left to Right |
mm |
640 |
| Size of shank holes depth |
mm |
70 |
| Distance between columns |
mm |
320 |
| Thickness of plate of workbench |
mm |
80 |
| Mold Height |
mm |
230 |
| Maximum tilt angle of press body |
degree |
15 |
| Motor Power |
kw |
3 |
| Overall Dimension |
F.B. |
mm |
1400 |
| L.R. |
mm |
1200 |
| Height |
mm |
2450 |
|
| Model |
HRBM40HV |
| Motor power |
1.5 kW |
| Leading roller speed |
9.3 r/min |
| Roller shaft diameter |
40 mm |
| Dimensions machine |
1340×930×1850 mm |
| Net weight |
490 kg |
|
| model |
Pipe Bending Machine RBM30HV |
| Motor power |
1.1 kW |
| Leading roller speed |
9 r/min |
| Roller shaft diameter |
30 mm |
| Dimensions machine |
820×620×1260 mm |
| Net weight |
282 kg |
|
