| Description | Description:
Using the latest design, with compact structure, advanced design, lightweight, high efficiency, easy to operate, reliable performance, and other characteristics; Crimp die, fitting, long service life; Strong magnetic installation, convenient and quick replacement of the whole set of molds, unique technology patent.
Features:
- Using a forged steel machine head, this kind of steel is more durable than general steel.
- Digital operation panel, high crimp accuracy.
- Humanized design, simple controls, and operation.
- Equipped with a foot pedal, very convenient for freehand operation.
- Magnetic dies (Patented), very convenient to remove and install dies
- With a large cabinet
| Descriptions
Round bending machine both Vertical and horizontal bending
Features:
- Horizontal and vertical operation
- With standard foot pedal
- Special cast frame+
- Shafts are hardened with special steel material
- Rollers are special steel material hardened and grounded
- Gears Milled with full material
| Description
TAB-ECP25 eccentric press is a suitable open type of crank press featuring a left and right open type machine body (i.e., a C-shaped machine body). Its steel plate welded body has a high shock-absorbing performance. Its novel overall design gives the machine an elegant appearance. Its throat has a certain depth. The compact structure makes the use convenient and operation safe. The punch press is equipped with a turn-key rigid clutch, a cam band brake, and a press-down type safety device. Its working table is open on three sides, so the mold loading and unloading, and operation are convenient. The punch press is widely used because it provides good conditions for mechanization and automation. And as the main equipment for plate punching production, the punch press can be used for punching holes, blanking, trimming, bending, shallow stretching, and forming. | Description
It uses compressed air as a power source (air pressure is adjustable)
It is used for riveting rivets of all kinds of brake shoes\brake disc\brake drum\brake lining \ brake pads
Features:
- It uses an air source; it is safe to operate
- It is suitable for heavy-duty truck brake linings
- Pressure can be adjusted according to the size of the rivets
- With oil and water separator
- With grease filling holes
- The pedal room is big
- With a cabinet for accessories
| Description
TAB-ECP40 eccentric press is a suitable open type of crank press featuring a left and right open type machine body (i.e., a C-shaped machine body). Its steel plate welded body has a high shock-absorbing performance. Its novel overall design gives the machine an elegant appearance. Its throat has a certain depth. The compact structure makes the use convenient and operation safe. The punch press is equipped with a turn-key rigid clutch, a cam band brake, and a press-down type safety device. Its working table is open on three sides, so the mold loading and unloading, and operation are convenient. The punch press is widely used because it provides good conditions for mechanization and automation. And as the main equipment for plate punching production, the punch press can be used for punching holes, blanking, trimming, bending, shallow stretching, and forming. | Description
The Bending machine adopts the sliding guide rail, and tension spring using sliding stationary, reducing the operating force by two-thirds, the bending, machine can be equipped with a pressure loading device, high shearing quality, and lightweight, mobile convenience features. It is widely used in the sheet metal industry, the machine tool made of high alloy tool steel, edge durability.
Features:
- Manual bending is with a fully welded steel structure and high strength.
- Strong bending capability, and reduction of labor intensity.
- Foot pedal can extend and shorten freely.
- The height of the foot pedal is low, easy operation.
Used for mild steel, aluminum copper, brass zinc plastic, leads High carbon, and chrome steel blade |
| Content |
| Hydraulic Crimping Machine WITH CABINET |
| Crimping Range |
6mm to 51mm (1/4" to 2") |
| Quantity of dies |
10 Sets |
| Accuracy |
0.01mm |
| Work efficiency |
200pcs/h |
| System Pressure |
31.5Mpa |
| Dies sets |
10 sets |
| The max open tolerance |
±30mm |
| Crimping force |
500T |
| Output volume of pump |
2.5/5L |
| Voltage |
380v - 3 phase 60hz |
| Motor power |
3kw 60hz |
| Machine Dimension |
900×680×1450mm |
| Net Weight |
326kg |
|
| model |
Pipe Bending Machine RBM30HV |
| Motor power |
1.1 kW |
| Leading roller speed |
9 r/min |
| Roller shaft diameter |
30 mm |
| Dimensions machine |
820×620×1260 mm |
| Net weight |
282 kg |
|
| Model |
Unit |
TAB-ECP25 |
| Nominal Pressure |
kn |
250 |
| Travel of slip block |
mm |
70 |
| Frequency of travel |
Frequency/minute |
40 |
| Enclosed height |
mm |
70 |
| Maximum adjustment of enclosed height |
mm |
60 |
| Distance from center of slip block to press body |
mm |
180 |
| Size of shank holes diameter |
mm |
40 |
| Bolster Surface |
Front to Rear |
mm |
520 |
| Left to Right |
mm |
330 |
| Size of shank holes depth |
mm |
60 |
| Distance between Uprights |
mm |
160 |
| Thickness of plate of workbench |
mm |
170 |
| Motor Power |
kw |
2.2 |
| Overall Dimension |
F.B. |
mm |
910 |
| L.R. |
mm |
700 |
| Height |
mm |
1800 |
|
| Model no |
TAB-8001 |
| Material |
Metal plate |
| Painting |
High-quality paint |
| Color |
Yellow |
| Max rivet force |
60KN(6T) |
| Working air pressure |
0.5-0.8Mpa (Adjustable) |
| Suitable rivet diameter |
10mm |
| Stroke of the riveter |
40mm |
| Height adjust distance of the shoe iron bracket |
20mm |
| Packing sizes |
N.W: 69KG |
| G.W: 101KG |
| 580×540×1440mm |
|
| Model |
Unit |
TAB-ECP40 |
| Nominal Pressure |
kn |
400 |
| Travel of slip block |
mm |
100 |
| Frequency of travel |
Frequency/minute |
50 |
| Enclosed height |
mm |
70 |
| Maximum adjustment of enclosed height |
mm |
60 |
| Distance from center of slip block to press body |
mm |
230 |
| Size of shank holes diameter |
mm |
50 |
| Bolster Surface |
Front to Rear |
mm |
410 |
| Left to Right |
mm |
640 |
| Size of shank holes depth |
mm |
70 |
| Distance between columns |
mm |
320 |
| Thickness of plate of workbench |
mm |
80 |
| Mold Height |
mm |
230 |
| Maximum tilt angle of press body |
degree |
15 |
| Motor Power |
kw |
3 |
| Overall Dimension |
F.B. |
mm |
1400 |
| L.R. |
mm |
1200 |
| Height |
mm |
2450 |
|
| Title |
Values |
| Model |
2×1300 |
| Max thickness of Plate(mm) |
2 |
| Max width of Plate(mm) |
1300 |
| Back gauge range(mm) |
0-700 |
| Weight (kg) |
545 |
| Overall Dimension (mm) |
1680×760×1150 |
|
