Steel Bar Cutting Machine RC40, improves compressive strength and plasticity, overcoming the disadvantages of low plasticity, and low compressive strength. The crankshaft adopts 45# steel as material, with high efficiency.
Descriptions
Steel Bar Cutting Machine RC40, improves compressive strength and plasticity, overcoming the disadvantages of low plasticity, and low compressive strength. The crankshaft adopts 45# steel as material, with high efficiency.
Description
Hydraulic round bending machine with hydraulic motor
both Vertical and horizontal bending
Features:
Horizontal and vertical operation
With the standard foot pedal
Special cast frame+
Shafts are hardened with special steel material
Rollers are special steel material hardened and grounded
Gears Milled with full material
HRBM50HV with hydraulic control
Features
The worktable is rotatable and equipped with horizontal and lifting mechanisms for inclined planning which enlarges its using scope.
It is convenient to adjust feedings and change tool paths by adopting a cam mechanism as a feeding system.
The machine has protections inside the tool path system against overloading due to the careless operation or external influences.
The blade will slide automatically, and non-destructive parts will work to ensure the normal operation of the machine.
The ram, rail bed, speeding gear, and major sliding guide are all lubricated by the oil pump.
The machine adopts a parking brake mechanism; therefore, it is unnecessary to cut off electric power when changing speed, starting, and stopping the machine.
Description:
TAB LM770 Conventional lathe is with a swing of 770mm for Medium industrial, the motor power is 7.5kw.
Features:
Precision ground and hardened bed ways.
The spindle is supported with precision roller bearings. The spindle system is high in rigidity and accuracy.
An automatic stopping device is used to realize an automatic stop for machining a workpiece of a certain length.
Easy operating speed change levers.
Removable gap is provided for more significant diameter work.
Description
LIGHT duty H-frame pneumatic and manual hydraulic press is an excellent choice for small workshops and is ideal for straightening, bending, and removing/installing gears, bearings, and bushings.
Features:
Easy to use.
Pressure gauge installed.
Lever installed.
Operating fast by using the pneumatic system.
Descriptions
Round bending machine both Vertical and horizontal bending
Features:
Horizontal and vertical operation
With standard foot pedal
Special cast frame+
Shafts are hardened with special steel material
Rollers are special steel material hardened and grounded
Gears Milled with full material
Content
model
Steel Bar Cutting Machine RC40
SPEED OF PRINCIPAL AXIS
32r/min
MAX.SIZE OF FLAT BAR
70×15mm
MAX.SIZE OF ANGEL BAR
50×50mm
MAX.SIZE OF SQUARE BAR
32×32mm
POWER OF MOTOR
3KW
SPEED OF MOTOR
2880r/min
VOLTAGE
380V/220V
DIMENSION
1320×490×850mm
WEIGHT
340KG
Model
HRBM50HV
Motor power
2,2 kW
Leading roller speed
13 r/min
Roller shaft diameter
50 mm
Dimensions machine
1500×950×1340 mm
Net weight
515 kg
model
TAB-S6066
Maximum cutting length(mm)
660
Maximum distance from ram bottom to table surface(mm)
770mm
