Drill Press Machine SP5225A دريل برس

Description

SP5225A drill press belongs to one of our most economical drill press

Features:

Adjustable depth stop
Quiet belt drive operation
FWD/REV toggle switch
Headstock runs in precision-bearings
Speeds allow the selection of optimum speeds at the workpiece

Export Catalog

Get a Price

Categories: Drill Presses, Drilling Machines, Machines

Description

Description

Model	SP5225A
Drilling capacity	Ø25mm (1″)
Motor power	750/900W
Chuck Capacity	5-20mm
Spindle stroke	85mm
Class Of Speed	12
Speed 60Hz	340~2860 R.P.M
Spindle taper	MT3
Auto-feeding step of worktable	180mm
Max. distance from spindle end to surface of table	685mm
Max. distance from spindle end to surface of base	1175mm
Swing	360mm
Table size	290×290mm
Base Size	460×270mm
Column Diameter	Ø72mm
Height	1600mm
N.W./G.W.	71/75kg
Packing size	1140×500×300mm

Quick Comparison

Settings Drill Press Machine SP5225A دريل برس remove Bandsaw Machine BS2240 منشار حديد remove Manual Metal Sheet Rolling Machine 0.8mm×1000mm لفافة صاج يدوية درفيل remove Pneumatic Manual Hydraulic H-Frame Press Machine 40TON remove Mechanical Eccentric Press Machine TAB-ECP16 مكبس سنتريك ميكانيكي remove Pipe Bending Machine HRBM50HV تناية مواسير remove

Name Drill Press Machine SP5225A دريل برس remove Bandsaw Machine BS2240 منشار حديد remove Manual Metal Sheet Rolling Machine 0.8mm×1000mm لفافة صاج يدوية درفيل remove Pneumatic Manual Hydraulic H-Frame Press Machine 40TON remove Mechanical Eccentric Press Machine TAB-ECP16 مكبس سنتريك ميكانيكي remove Pipe Bending Machine HRBM50HV تناية مواسير remove

Image

SKU

Rating

(No)

Price

Stock

Availability

Add to cart

Description

Description SP5225A drill press belongs to one of our most economical drill press Features:

Adjustable depth stop
Quiet belt drive operation
FWD/REV toggle switch
Headstock runs in precision-bearings
Speeds allow the selection of optimum speeds at the workpiece

Description TAB-BS2240 High-Quality Horizontal metal cutting bandsaw is one of our most economic and durable horizontal metal cutting bandsaw machine Features:

The maximum processing capability of BAND SAW is 9"(229mm)
High-capacity due to controlled by motor
Can rotate from 0° to 45°
Has the advantage of quickly clamping.
Features a belt driven and has four cutting speeds.
The falling speed of the saw bow is controlled by a hydraulic cylinder
With a power break protection device, the machine will power off automatically when the rear protective cover is opened
With coolant system, can prolong the service life of the saw blade and improve the precision of the workpiece
Has a block feeder (with fixed sawing length)

Features:

The roller adopts high strength and high life solid bearing roller with long time and small deformation.
The driving gear adopts forging high carbon steel, high hardness, and wear-resisting solid property.
The whole machine adopts integral steel plate welding, thick and beautiful, and the stability is good.
Simple operation, a single person can work independently

Description LIGHT duty H-frame pneumatic and manual hydraulic press is an excellent choice for small workshops and is ideal for straightening, bending, and removing/installing gears, bearings, and bushings. Features:

Easy to use.
Pressure gauge installed.
Lever installed.
Operating fast by using the pneumatic system.

Description TAB-ECP16 eccentric press is a suitable open type of crank press featuring a left and right open type machine body (i.e., a C-shaped machine body). Its steel plate welded body has a high shock-absorbing performance. Its novel overall design gives the machine an elegant appearance. Its throat has a certain depth. The compact structure makes the use convenient and operation safe. The punch press is equipped with a turn-key rigid clutch, a cam band brake, and a press-down type safety device. Its working table is open on three sides, so the mold loading and unloading, and operation are convenient. The punch press is widely used because it provides good conditions for mechanization and automation. And as the main equipment for plate punching production, the punch press can be used for punching holes, blanking, trimming, bending, shallow stretching, and forming.

Description Hydraulic round bending machine with hydraulic motor both Vertical and horizontal bending Features:

Horizontal and vertical operation
With the standard foot pedal
Special cast frame+
Shafts are hardened with special steel material
Rollers are special steel material hardened and grounded
Gears Milled with full material
HRBM50HV with hydraulic control

Content

Model	SP5225A
Drilling capacity	Ø25mm (1")
Motor power	750/900W
Chuck Capacity	5-20mm
Spindle stroke	85mm
Class Of Speed	12
Speed 60Hz	340~2860 R.P.M
Spindle taper	MT3
Auto-feeding step of worktable	180mm
Max. distance from spindle end to surface of table	685mm
Max. distance from spindle end to surface of base	1175mm
Swing	360mm
Table size	290×290mm
Base Size	460×270mm
Column Diameter	Ø72mm
Height	1600mm
N.W./G.W.	71/75kg
Packing size	1140×500×300mm

Model	BS2240
Cutting Capacity (mm)	Round 220
	Square 400W x 100H
	Blade speed (mm/min ) - 21/34/43/60
Blade Size (mm)	27x0.9x3330
Main Motor (kW)	1.5
Water pump Motor (w)	60
Feeding Speed	Stepless
Workpiece clamping	Manual
Blade Tensioning	Manual
Main Drive	Wormwheel Drive
Table height (mm)	300
Size outward (mm)	1750×780×1130

Manual Metal Sheet Rolling Machine 0.8mm×1000mm
Model	Max thickness of Plate(mm)	Max width of Plate(mm)	Dia.of upper roller(mm)	Dia.of side roller(mm)	Weight (kg)	Overall Dimension (mm)
0.8×1000	0.8	1000	50	80	105	1480×350×500

model	40TON
Material	U-steel
Painting	High-quality paint
Color	Blue
Max working press	400KN(40T)
Max working height G	1050mm
Max working width B	595mm
Stroke H	200mm
Oil cylinder pressure	61.7Mpa
Total height of the press C	1820mm
Total width of the press A	935mm
Net Weight	220Kg
Gross Weight	250Kg

Model		Unit	TAB-ECP16
Nominal Pressure		kn	160
Strokes per Minute		Spm	110
Max.Die Height		mm	190
Die Height Adjustment		mm	40
Throat Depth		mm	160
Bolster Surface	Front to Rear	mm	280
Bolster Surface	Left to Right	mm	450
Blanking hole		mm	100
Distance between Uprights		mm	160
Thickness of Bolster		mm	60
Inclinable Angle		degree	40
Motor Power		kw	1.5
Overall Dimension	F.B.	mm	800
	L.R.	mm	670
	Height	mm	1700