| Description | Description
SP5225A drill press belongs to one of our most economical drill press
Features:
- Adjustable depth stop
- Quiet belt drive operation
- FWD/REV toggle switch
- Headstock runs in precision-bearings
- Speeds allow the selection of optimum speeds at the workpiece
| Features
- The worktable is rotatable and equipped with horizontal and lifting mechanisms for inclined planning which enlarges its using scope.
- It is convenient to adjust feedings and change tool paths by adopting a cam mechanism as a feeding system.
- The machine has protections inside the tool path system against overloading due to the careless operation or external influences.
- The blade will slide automatically, and non-destructive parts will work to ensure the normal operation of the machine.
- The ram, rail bed, speeding gear, and major sliding guide are all lubricated by the oil pump.
- The machine adopts a parking brake mechanism; therefore, it is unnecessary to cut off electric power when changing speed, starting, and stopping the machine.
| Description
TAB-ECP63 electric press is a suitable open type of crank press featuring a left and right open type machine body (i.e., a C-shaped machine body). Its steel plate welded body has a high shock-absorbing performance. Its novel overall design gives the machine an elegant appearance. Its throat has a certain depth. The compact structure makes the use convenient and operation safe. The punch press is equipped with a turn-key rigid clutch, a cam band brake, and a press-down type safety device. Its working table is open on three sides, so the mold loading and unloading, and operation are convenient. The punch press is widely used because it provides good conditions for mechanization and automation. And as the main equipment for plate punching production, the punch press can be used for punching holes, blanking, trimming, bending, shallow stretching, and forming. | Description
TAB-ECP80 eccentric press is a suitable open type of crank press featuring a left and right open type machine body (i.e., a C-shaped machine body). Its steel plate welded body has a high shock-absorbing performance. Its novel overall design gives the machine an elegant appearance. Its throat has a certain depth. The compact structure makes the use convenient and operation safe. The punch press is equipped with a turn-key rigid clutch, a cam band brake, and a press-down type safety device. Its working table is open on three sides, so the mold loading and unloading, and operation are convenient. The punch press is widely used because it provides good conditions for mechanization and automation. And as the main equipment for plate punching production, the punch press can be used for punching holes, blanking, trimming, bending, shallow stretching, and forming. | Descriptions
Round bending machine both Vertical and horizontal bending
Features:
- Horizontal and vertical operation
- With standard foot pedal
- Special cast frame+
- Shafts are hardened with special steel material
- Rollers are special steel material hardened and grounded
- Gears Milled with full material
| Description
Hydraulic round bending machine with hydraulic motor
both Vertical and horizontal bending
Features:
- Horizontal and vertical operation
- With the standard foot pedal
- Special cast frame+
- Shafts are hardened with special steel material
- Rollers are special steel material hardened and grounded
- Gears Milled with full material
- HRBM40HV with hydraulic control
|
| Content |
| Model |
SP5225A |
| Drilling capacity |
Ø25mm (1") |
| Motor power |
750/900W |
| Chuck Capacity |
5-20mm |
| Spindle stroke |
85mm |
| Class Of Speed |
12 |
| Speed 60Hz |
340~2860 R.P.M |
| Spindle taper |
MT3 |
| Auto-feeding step of worktable |
180mm |
| Max. distance from spindle end to surface of table |
685mm |
| Max. distance from spindle end to surface of base |
1175mm |
| Swing |
360mm |
| Table size |
290×290mm |
| Base Size |
460×270mm |
| Column Diameter |
Ø72mm |
| Height |
1600mm |
| N.W./G.W. |
71/75kg |
| Packing size |
1140×500×300mm |
|
| model |
TAB-S6066 |
| Maximum cutting length(mm) |
660 |
| Maximum distance from ram bottom to table surface(mm) |
385 |
| Maximum table horizontal travel(mm) |
660 |
| Maximum table vertical travel(mm) |
360 |
| Dimensions of table top surface(L×W)(mm) |
630×400 |
| Travel of tool head(mm) |
120 |
| Number of ram strokes per minute |
14, 20, 28, 40, 56, 80 |
| Swivel of tool head(°) |
±60° |
| Maximum size of tool shank(W×T)(mm) |
20×30 |
| Range of table power feed(mm) |
horizontal |
0.2~2.5 |
| vertical |
18 |
| Width of central T-slot of table(mm) |
18 |
| Power of mortr(kw) |
3 |
| Overall dimensions(L×W×H)(mm) |
2000×1300×1550 |
| N.W/G.W(kg) |
1750/1870 |
|
| Model |
Unit |
TAB-ECP63 |
| Nominal Pressure |
kn |
630 |
| Travel of slip block |
mm |
100 |
| Frequency of travel |
Frequency/minute |
50 |
| Enclosed height |
mm |
70 |
| Maximum adjustment of enclosed height |
mm |
80 |
| Distance from center of slip block to press body |
mm |
230 |
| Size of shank holes diameter |
mm |
50 |
| Bolster Surface |
Front to Rear |
mm |
450 |
| Left to Right |
mm |
700 |
| Size of shank holes depth |
mm |
70 |
| Distance between columns |
mm |
370 |
| Mold Height |
mm |
220 |
| Motor Power |
kw |
5.5 |
| Overall Dimensions |
F.R. |
mm |
1800 |
| L.R. |
mm |
1500 |
| Height |
mm |
2650 |
|
| Model |
Unit |
TAB-ECP80 |
| Nominal Pressure |
kn |
800 |
| Travel of slip block |
mm |
120 |
| Frequency of travel |
Frequency/minute |
40 |
| Enclosed height |
mm |
70 |
| Maximum adjustment of enclosed height |
mm |
60 |
| Distance from center of slip block to press body |
mm |
90 |
| Size of shank holes diameter |
mm |
60 |
| Bolster Surface |
Front to Rear |
mm |
480 |
| Left to Right |
mm |
750 |
| Size of shank holes depth |
mm |
70 |
| Distance between columns |
mm |
300 |
| Mold Height |
mm |
250 |
| Motor Power |
kw |
5.5 |
| Overall Dimensions |
F.R. |
mm |
1790 |
| L.R. |
mm |
1420 |
| Height |
mm |
2550 |
|
| model |
Pipe Bending Machine RBM40HV |
| Motor power |
1.5 kW |
| Leading roller speed |
9.3 r/min |
| Roller shaft diameter |
40 mm |
| Dimensions machine |
1400×950×1340 mm |
| Net weight |
425 kg |
|
| Model |
HRBM40HV |
| Motor power |
1.5 kW |
| Leading roller speed |
9.3 r/min |
| Roller shaft diameter |
40 mm |
| Dimensions machine |
1340×930×1850 mm |
| Net weight |
490 kg |
|
