Description | Features:
- Lathe machine for Disc & Drum.
- Direct driving motor type (first in KOREA).
- High-precision digital micrometer.
- LM(Linear Motion) guide keeps high precision even with long-term use.
- Special fabrication of Integral Arbor shafts reduces machine tolerances.
- Built-in Inverter provides easy control of rotation speed.
- Built-in Cover with LED to protect chips from flying.
- Centralized control box for easy operation.
- Multi-functional drawer makes it easy to store accessories.
- Slide discharge method allows easy discharge of chips without removing the cap.
- One-touch switching between automatic and manual operation.
| Description
TAB-ECP6.3-1 eccentric press is a suitable open type of crank press featuring a left and right open type machine body (i.e., a C-shaped machine body). Its steel plate welded body has a high shock-absorbing performance. Its novel overall design gives the machine an elegant appearance. Its throat has a certain depth. The compact structure makes the use convenient and operation safe. The punch press is equipped with a turn-key rigid clutch, a cam band brake, and a press-down type safety device. Its working table is open on three sides, so the mold loading and unloading, and operation are convenient. The punch press is widely used because it provides good conditions for mechanization and automation. And as the main equipment for plate punching production, the punch press can be used for punching holes, blanking, trimming, bending, shallow stretching, and forming. | Features:
- The roller adopts high strength and high life solid bearing roller with long time and small deformation.
- The driving gear adopts forging high carbon steel, high hardness, and wear-resisting solid property.
- The whole machine adopts integral steel plate welding, thick and beautiful, and the stability is good.
- Simple operation, a single person can work independently
| Description
Hydraulic round bending machine with hydraulic motor
both Vertical and horizontal bending
Features:
- Horizontal and vertical operation
- With the standard foot pedal
- Special cast frame+
- Shafts are hardened with special steel material
- Rollers are special steel material hardened and grounded
- Gears Milled with full material
- HRBM40HV with hydraulic control
| Description
This SP3103 machine is a step-less timing vertical drilling machine with a wide belt, light in weight small in volume easy to operate, safe, and reliable.
It is a universal machine that could be widely used for small and middle-sized workpieces or drilling spot facing, reaming, tapping, etc.
And it also could equip many kinds of accessories, to extend machining function and usage area.
Digital speeds screen installed
These machines are suitable for machining workshops, maintenance workshops, and mini-type workshops. | Description
Hydraulic round bending machine with hydraulic motor
both Vertical and horizontal bending
Features:
- Horizontal and vertical operation
- With the standard foot pedal
- Special cast frame+
- Shafts are hardened with special steel material
- Rollers are special steel material hardened and grounded
- Gears Milled with full material
- HRBM50HV with hydraulic control
|
Content |
Model |
Brake Lathe Machine KBL-9000LD |
Work scope |
Disk |
diameter- 500mm, thickness- 50mm |
Drum |
diameter- 500mm, depth- 140mm |
RPM |
0-120 RPM(Continuously variable transmission) High performance inverter |
Main motor |
220V 60Hz 1HP |
Precision |
0.05mm(0.001969inch) |
Input power |
220V 60Hz |
Run out |
MAX 0.003mm(0.000079inch) |
Adjusting RPM |
0-120 RPM(Continuously variable transmission) High performance inverter |
Driving system |
Linear drive |
Shaft |
All in one |
Left & right shift |
V-shaped rail conveying type |
Cone adapter |
88mm, 105mm, 128mm, Hub type 4EA, kit for drum type |
Grinding methods |
fixed type |
Grinding type |
Disk / Separable drum type / Hub type |
Lighting & safety cover |
LED60EA / Acrylic safety cover |
Compartment |
Versatile four drawers |
Packing size |
1060 x 1060 x 1490mm |
Weight (Net/Gross) |
240 / 345kg |
|
Model |
Unit |
TAB-ECP6.3 |
Nominal Pressure |
kn |
63 |
Travel of slip block |
mm |
40 |
Frequency of travel |
Frequency/minute |
50 |
Enclosed height |
mm |
70 |
Maximum adjustment of enclosed height |
mm |
30 |
Distance from center of slip block to press body |
mm |
190 |
Size of shank holes diameter |
mm |
70 |
Bolster Surface |
Front to Rear |
mm |
200 |
Left to Right |
mm |
340 |
Size of shank holes depth |
mm |
70 |
Distance between columns |
mm |
120 |
Thickness of plate of workbench |
mm |
30 |
Mold Height |
mm |
190 |
Maximum tilt angle of press body |
degree |
20 |
Motor Power |
kw |
0.75 |
Overall Dimension |
F.B. |
mm |
400 |
L.R. |
mm |
500 |
Height |
mm |
1300 |
|
Manual Metal Sheet Rolling Machine 0.8mm×1000mm |
Model |
Max thickness of Plate(mm) |
Max width of Plate(mm) |
Dia.of upper roller(mm) |
Dia.of side roller(mm) |
Weight (kg) |
Overall Dimension (mm) |
0.8×1000 |
0.8 |
1000 |
50 |
80 |
105 |
1480×350×500 |
|
Model |
HRBM40HV |
Motor power |
1.5 kW |
Leading roller speed |
9.3 r/min |
Roller shaft diameter |
40 mm |
Dimensions machine |
1340×930×1850 mm |
Net weight |
490 kg |
|
model |
SP3103 |
Max. drilling diameter (steel) |
25mm |
Max. taping diameter (steel) |
M12mm |
Max. stroke of the spindle |
110mm |
Distance between spindle center line to the generating line of column |
230mm |
Max. distance between spindle end to the surface of the worktable |
690mm |
Max. distance between spindle end to the worktable surface of the base |
1180mm |
Max. stroke of worktable and its bracket |
555mm |
Spindle taper bore |
MT3 |
Number of speed steps of the spindle |
Stepless |
Spindle speed range |
80 ~ 1600 r/min |
Working area of the worktable (L x W) |
400×320mm |
Working area of the worktable of the base(L x W) |
340×320mm |
Diameter of column |
100mm |
Power of the main power |
0.55/0.85kw |
Machine dimension (L×B×H) |
820×530×1715mm |
Packing dimension(L×B×H) |
860×580×1800mm |
Net weight/gross weight |
245/280kg |
|
Model |
HRBM50HV |
Motor power |
2,2 kW |
Leading roller speed |
13 r/min |
Roller shaft diameter |
50 mm |
Dimensions machine |
1500×950×1340 mm |
Net weight |
515 kg |
|