Description | Descriptions
For high-precision metal cutting, is the ideal equipment for industrial and mining enterprises and small workshops, use is very extensive.
Features:
- Vice can move from left to right, to fit the saw arm swivel
- Hydraulic cylinder for automatic stepless cutting
| Description
TAB-BS2240 High-Quality Horizontal metal cutting bandsaw is one of our most economic and durable horizontal metal cutting bandsaw machine
Features:
- The maximum processing capability of BAND SAW is 9"(229mm)
- High-capacity due to controlled by motor
- Can rotate from 0° to 45°
- Has the advantage of quickly clamping.
- Features a belt driven and has four cutting speeds.
- The falling speed of the saw bow is controlled by a hydraulic cylinder
- With a power break protection device, the machine will power off automatically when the rear protective cover is opened
- With coolant system, can prolong the service life of the saw blade and improve the precision of the workpiece
- Has a block feeder (with fixed sawing length)
| Description
TAB-ECP16 eccentric press is a suitable open type of crank press featuring a left and right open type machine body (i.e., a C-shaped machine body). Its steel plate welded body has a high shock-absorbing performance. Its novel overall design gives the machine an elegant appearance. Its throat has a certain depth. The compact structure makes the use convenient and operation safe. The punch press is equipped with a turn-key rigid clutch, a cam band brake, and a press-down type safety device. Its working table is open on three sides, so the mold loading and unloading, and operation are convenient. The punch press is widely used because it provides good conditions for mechanization and automation. And as the main equipment for plate punching production, the punch press can be used for punching holes, blanking, trimming, bending, shallow stretching, and forming. | Description
It uses compressed air as a power source (air pressure is adjustable)
It is used for riveting rivets of all kinds of brake shoes\brake disc\brake drum\brake lining \ brake pads
Features:
- It uses an air source; it is safe to operate
- It is suitable for heavy-duty truck brake linings
- Pressure can be adjusted according to the size of the rivets
- With oil and water separator
- With grease filling holes
- The pedal room is big
- With a cabinet for accessories
| Descriptions
Round bending machine both Vertical and horizontal bending
Features:
- Horizontal and vertical operation
- With standard foot pedal
- Special cast frame+
- Shafts are hardened with special steel material
- Rollers are special steel material hardened and grounded
- Gears Milled with full material
| Description
Hydraulic round bending machine with hydraulic motor
both Vertical and horizontal bending
Features:
- Horizontal and vertical operation
- With the standard foot pedal
- Special cast frame+
- Shafts are hardened with special steel material
- Rollers are special steel material hardened and grounded
- Gears Milled with full material
- HRBM40HV with hydraulic control
|
Content |
Model |
Bandsaw Machine BS712GSW |
Motor power |
1100W
(220V single phase)
(380V three phase) |
Saw blade size |
2360x20x0.9mm |
Blade speed |
22 / 33 / 45 / 65 m/min |
Cutting capacity max |
205mm round
205mm square
215x205mm rectangle |
Cutting angle |
0 °L45°R45° |
Packing size |
770x520x320mm |
N.W./G.W. |
180/215kgs |
|
Model |
BS2240 |
Cutting Capacity (mm) |
Round●220 |
Square■400W x 100H |
Blade speed (mm/min ) - 21/34/43/60 |
Blade Size (mm) |
27x0.9x3330 |
Main Motor (kW) |
1.5 |
Water pump Motor (w) |
60 |
Feeding Speed |
Stepless |
Workpiece clamping |
Manual |
Blade Tensioning |
Manual |
Main Drive |
Wormwheel Drive |
Table height (mm) |
300 |
Size outward (mm) |
1750×780×1130 |
|
Model |
Unit |
TAB-ECP16 |
Nominal Pressure |
kn |
160 |
Strokes per Minute |
Spm |
110 |
Max.Die Height |
mm |
190 |
Die Height Adjustment |
mm |
40 |
Throat Depth |
mm |
160 |
Bolster Surface |
Front to Rear |
mm |
280 |
Left to Right |
mm |
450 |
Blanking hole |
mm |
100 |
Distance between Uprights |
mm |
160 |
Thickness of Bolster |
mm |
60 |
Inclinable Angle |
degree |
40 |
Motor Power |
kw |
1.5 |
Overall Dimension |
F.B. |
mm |
800 |
L.R. |
mm |
670 |
Height |
mm |
1700 |
|
Model no |
SP-8001 |
Material |
Metal plate |
Painting |
High-quality paint |
Color |
Blue |
Max rivet force |
60KN(6T) |
Working air pressure |
0.5-0.8Mpa (Adjustable) |
Suitable rivet diameter |
10mm |
Stroke of the riveter |
40mm |
Height adjust distance of the shoe iron bracket |
20mm |
Packing sizes |
N.W: 69KG |
G.W: 101KG |
580×540×1440mm |
|
model |
Pipe Bending Machine RBM30HV |
Motor power |
1.1 kW |
Leading roller speed |
9 r/min |
Roller shaft diameter |
30 mm |
Dimensions machine |
820×620×1260 mm |
Net weight |
282 kg |
|
Model |
HRBM40HV |
Motor power |
1.5 kW |
Leading roller speed |
9.3 r/min |
Roller shaft diameter |
40 mm |
Dimensions machine |
1340×930×1850 mm |
Net weight |
490 kg |
|