| Description | Description
The Hydraulic Ironworker Machines adopt hydraulic transmission. It is the latest product of the domestic multi-functional combined punching and shearing machine. It can cut, punch, die cut flat steel, square steel, round steel, angle steel, channel steel, and I-beam. Equipped with a shear stop device. It is a machine tool that integrates multiple functions such as metal shearing, punching, plate shearing, bending, etc. It has the advantages of simple operation, low energy consumption, and low maintenance cost.
Features:
- Robust and accurate steel frame
- Large punch table with scales
- Removable bolster for punching flanges and channel and beam
- 2 independent hydraulic cylinders
- 2 shielded foot controls
- 2 Separate Die Openings for oversized punching
- 5 working stations for wide applications
- power inching on all 5 workstations
- plate shear support table and notching table
- adjustable stroke controls with indicators on both cylinders
- punching machine: Movable work light
- overload protection on the hydraulic system
- electric back gauge
- optional bending attachment
| Description
TAB-ECP25 eccentric press is a suitable open type of crank press featuring a left and right open type machine body (i.e., a C-shaped machine body). Its steel plate welded body has a high shock-absorbing performance. Its novel overall design gives the machine an elegant appearance. Its throat has a certain depth. The compact structure makes the use convenient and operation safe. The punch press is equipped with a turn-key rigid clutch, a cam band brake, and a press-down type safety device. Its working table is open on three sides, so the mold loading and unloading, and operation are convenient. The punch press is widely used because it provides good conditions for mechanization and automation. And as the main equipment for plate punching production, the punch press can be used for punching holes, blanking, trimming, bending, shallow stretching, and forming. | Description
Hydraulic round bending machine with hydraulic motor
both Vertical and horizontal bending
Features:
- Horizontal and vertical operation
- With the standard foot pedal
- Special cast frame+
- Shafts are hardened with special steel material
- Rollers are special steel material hardened and grounded
- Gears Milled with full material
- HRBM40HV with hydraulic control
| Description
The Bending machine adopts the sliding guide rail, and tension spring using sliding stationary, reducing the operating force by two-thirds, the bending, machine can be equipped with a pressure loading device, high shearing quality, and lightweight, mobile convenience features. It is widely used in the sheet metal industry, the machine tool made of high alloy tool steel, edge durability.
Features:
- Manual bending is with a fully welded steel structure and high strength.
- Strong bending capability, and reduction of labor intensity.
- Foot pedal can extend and shorten freely.
- The height of the foot pedal is low, easy operation.
Used for mild steel, aluminum copper, brass zinc plastic, leads High carbon, and chrome steel blade | Features:
- The roller adopts high strength and high life solid bearing roller with long time and small deformation.
- The driving gear adopts forging high carbon steel, high hardness, and wear-resisting solid property.
- The whole machine adopts integral steel plate welding, thick and beautiful, and the stability is good.
- Simple operation, a single person can work independently
| Description
It uses compressed air as a power source (air pressure is adjustable)
It is used for riveting rivets of all kinds of brake shoes\brake disc\brake drum\brake lining \ brake pads
Features:
- It uses an air source; it is safe to operate
- It is suitable for heavy-duty truck brake linings
- Pressure can be adjusted according to the size of the rivets
- With oil and water separator
- With grease filling holes
- The pedal room is big
- With a cabinet for accessories
|
| Content |
| Item |
Unit |
45 |
60 |
90 |
| Hole Punching |
Punching Pressure |
kn |
45 |
60 |
90 |
| Max. Punching Thickness |
mm |
15 |
16 |
20 |
| Max. Diameter of punching |
mm |
28 |
25 |
30 |
| Depth of Throat |
mm |
220 |
300 |
355 |
| Max Length of Cylinder Stroke |
mm |
55 |
80 |
80 |
| Stroke Times |
Times/min |
8--22 |
8--22 |
8--22 |
| Flat-Bar Shearing |
Angel of Shear |
Degree |
7° |
7° |
8° |
| Max. Shearing Thickness |
mm |
16 |
16 |
20 |
| Flat Bar (WxT) |
mm |
200x15 |
400x8 |
480x10 |
| 250x16 |
330x20 |
| Angel Steel Shearing |
90° Shearing of equal Angel Steel |
mm |
120x120x12 |
120x120x10 |
140x140x12 |
| 45° Shearing of equal Angel Steel |
mm |
70x70x6 |
70x70x8 |
70x70x10 |
| Profile Steel Shearing |
Round-Bar |
mm |
40 |
45 |
50 |
| Square-Bar |
mm |
35x35 |
40x40 |
45x45 |
| T-Bar |
mm |
100x50x12 |
120x60x12 |
140x70x12 |
| I-Beam |
mm |
100x55x4 |
126x74x5 |
160x86x6 |
| C-Channel |
mm |
100 |
126x53x5.5 |
160x60x6.5 |
| Notching |
Thickness |
mm |
10 |
10 |
13 |
| Width |
mm |
45 |
57 |
57 |
| Depth |
mm |
90 |
100 |
100 |
| Material Tensile Strength |
N/mm² |
450 |
450 |
450 |
| Power Motor |
Kw |
4 |
4 |
5.5 |
| Overall Dimensions (LxWxH) |
mm |
1550x800x1700 |
1650x800x1780 |
1950X900X1930 |
| Gross Weight |
Kg |
1450 |
1800 |
2600 |
|
| Model |
Unit |
TAB-ECP25 |
| Nominal Pressure |
kn |
250 |
| Travel of slip block |
mm |
70 |
| Frequency of travel |
Frequency/minute |
40 |
| Enclosed height |
mm |
70 |
| Maximum adjustment of enclosed height |
mm |
60 |
| Distance from center of slip block to press body |
mm |
180 |
| Size of shank holes diameter |
mm |
40 |
| Bolster Surface |
Front to Rear |
mm |
520 |
| Left to Right |
mm |
330 |
| Size of shank holes depth |
mm |
60 |
| Distance between Uprights |
mm |
160 |
| Thickness of plate of workbench |
mm |
170 |
| Motor Power |
kw |
2.2 |
| Overall Dimension |
F.B. |
mm |
910 |
| L.R. |
mm |
700 |
| Height |
mm |
1800 |
|
| Model |
HRBM40HV |
| Motor power |
1.5 kW |
| Leading roller speed |
9.3 r/min |
| Roller shaft diameter |
40 mm |
| Dimensions machine |
1340×930×1850 mm |
| Net weight |
490 kg |
|
| Model |
Max thickness of Plate(mm) |
Max width of Plate(mm) |
Back gauge range(mm) |
Weight (kg) |
Overall Dimension (mm) |
| 2×1300 |
2 |
1300 |
0-700 |
545 |
1680×760×1150 |
|
| Manual Metal Sheet Rolling Machine 0.8mm×1000mm |
| Model |
Max thickness of Plate(mm) |
Max width of Plate(mm) |
Dia.of upper roller(mm) |
Dia.of side roller(mm) |
Weight (kg) |
Overall Dimension (mm) |
| 0.8×1000 |
0.8 |
1000 |
50 |
80 |
105 |
1480×350×500 |
|
| Model no |
TAB-8001 |
| Material |
Metal plate |
| Painting |
High-quality paint |
| Color |
Yellow |
| Max rivet force |
60KN(6T) |
| Working air pressure |
0.5-0.8Mpa (Adjustable) |
| Suitable rivet diameter |
10mm |
| Stroke of the riveter |
40mm |
| Height adjust distance of the shoe iron bracket |
20mm |
| Packing sizes |
N.W: 69KG |
| G.W: 101KG |
| 580×540×1440mm |
|
