Description | Description
This Machine is mainly used for reboring engine cylinders of motor cycles, automobiles, medium, and small tractors.
Features
- Reliable performance, widely use processing accuracy high productivity.
- Easy and Flexible operation
- Good rigidity, amount of cutting
| Description
TAB-ECP63 electric press is a suitable open type of crank press featuring a left and right open type machine body (i.e., a C-shaped machine body). Its steel plate welded body has a high shock-absorbing performance. Its novel overall design gives the machine an elegant appearance. Its throat has a certain depth. The compact structure makes the use convenient and operation safe. The punch press is equipped with a turn-key rigid clutch, a cam band brake, and a press-down type safety device. Its working table is open on three sides, so the mold loading and unloading, and operation are convenient. The punch press is widely used because it provides good conditions for mechanization and automation. And as the main equipment for plate punching production, the punch press can be used for punching holes, blanking, trimming, bending, shallow stretching, and forming. | Description
Hydraulic round bending machine with hydraulic motor
both Vertical and horizontal bending
Features:
- Horizontal and vertical operation
- With the standard foot pedal
- Special cast frame+
- Shafts are hardened with special steel material
- Rollers are special steel material hardened and grounded
- Gears Milled with full material
- HRBM50HV with hydraulic control
| Description
It uses compressed air as a power source (air pressure is adjustable)
It is used for riveting rivets of all kinds of brake shoes\brake disc\brake drum\brake lining \ brake pads
Features:
- It uses an air source; it is safe to operate
- It is suitable for heavy-duty truck brake linings
- Pressure can be adjusted according to the size of the rivets
- With oil and water separator
- With grease filling holes
- The pedal room is big
- With a cabinet for accessories
| Description
The Bending machine adopts the sliding guide rail, and tension spring using sliding stationary, reducing the operating force by two-thirds, the bending, machine can be equipped with a pressure loading device, high shearing quality, and lightweight, mobile convenience features. It is widely used in the sheet metal industry, the machine tool made of high alloy tool steel, edge durability.
Features:
- Manual bending is with a fully welded steel structure and high strength.
- Strong bending capability, and reduction of labor intensity.
- Foot pedal can extend and shorten freely.
- The height of the foot pedal is low, easy operation.
Used for mild steel, aluminum copper, brass zinc plastic, leads High carbon, and chrome steel blade | Description
Hydraulic round bending machine with hydraulic motor
both Vertical and horizontal bending
Features:
- Horizontal and vertical operation
- With the standard foot pedal
- Special cast frame+
- Shafts are hardened with special steel material
- Rollers are special steel material hardened and grounded
- Gears Milled with full material
- HRBM40HV with hydraulic control
|
Content |
MODEL |
T809A |
Diameter of boring hole |
50-95mm |
Max. boring depth |
170mm |
Rotational speed of spindle |
394r/min |
Feed of spindle |
0.10mm/r |
Return and rise mode of spindle |
manual operated |
Electric motor |
Power |
0.25kw |
Rotational speed |
1440r/min |
Voltage |
380v |
Frequency |
60HZ |
Overall dimension |
350×272×725mm |
Weight |
200kg |
|
Model |
Unit |
TAB-ECP63 |
Nominal Pressure |
kn |
630 |
Travel of slip block |
mm |
100 |
Frequency of travel |
Frequency/minute |
50 |
Enclosed height |
mm |
70 |
Maximum adjustment of enclosed height |
mm |
80 |
Distance from center of slip block to press body |
mm |
230 |
Size of shank holes diameter |
mm |
50 |
Bolster Surface |
Front to Rear |
mm |
450 |
Left to Right |
mm |
700 |
Size of shank holes depth |
mm |
70 |
Distance between columns |
mm |
370 |
Mold Height |
mm |
220 |
Motor Power |
kw |
5.5 |
Overall Dimensions |
F.R. |
mm |
1800 |
L.R. |
mm |
1500 |
Height |
mm |
2650 |
|
Model |
HRBM50HV |
Motor power |
2,2 kW |
Leading roller speed |
13 r/min |
Roller shaft diameter |
50 mm |
Dimensions machine |
1500×950×1340 mm |
Net weight |
515 kg |
|
Model no |
SP-8001 |
Material |
Metal plate |
Painting |
High-quality paint |
Color |
Blue |
Max rivet force |
60KN(6T) |
Working air pressure |
0.5-0.8Mpa (Adjustable) |
Suitable rivet diameter |
10mm |
Stroke of the riveter |
40mm |
Height adjust distance of the shoe iron bracket |
20mm |
Packing sizes |
N.W: 69KG |
G.W: 101KG |
580×540×1440mm |
|
Title |
Values |
Model |
2×1300 |
Max thickness of Plate(mm) |
2 |
Max width of Plate(mm) |
1300 |
Back gauge range(mm) |
0-700 |
Weight (kg) |
545 |
Overall Dimension (mm) |
1680×760×1150 |
|
Model |
HRBM40HV |
Motor power |
1.5 kW |
Leading roller speed |
9.3 r/min |
Roller shaft diameter |
40 mm |
Dimensions machine |
1340×930×1850 mm |
Net weight |
490 kg |
|