Description
Conventional lathe SPL 800 by Sumori Espanza has a swing of 800mm for Medium industrial, the motor power is 7.5kw.
Features:
Precision ground and hardened bed ways.
The spindle is supported with precision roller bearings. The spindle system is high in rigidity and accuracy.
An automatic stopping device is used to realize automatic stops for the machining of a workpiece of a certain length.
Easy operating speed change levers.
A removable gap is provided for larger-diameter work.
Description
It uses compressed air as a power source (air pressure is adjustable)
It is used for riveting rivets of all kinds of brake shoes\brake disc\brake drum\brake lining \ brake pads
Features:
It uses an air source; it is safe to operate
It is suitable for heavy-duty truck brake linings
Pressure can be adjusted according to the size of the rivets
With oil and water separator
With grease filling holes
The pedal room is big
With a cabinet for accessories
Description
TAB-ECP6.3-1 eccentric press is a suitable open type of crank press featuring a left and right open type machine body (i.e., a C-shaped machine body). Its steel plate welded body has a high shock-absorbing performance. Its novel overall design gives the machine an elegant appearance. Its throat has a certain depth. The compact structure makes the use convenient and operation safe. The punch press is equipped with a turn-key rigid clutch, a cam band brake, and a press-down type safety device. Its working table is open on three sides, so the mold loading and unloading, and operation are convenient. The punch press is widely used because it provides good conditions for mechanization and automation. And as the main equipment for plate punching production, the punch press can be used for punching holes, blanking, trimming, bending, shallow stretching, and forming.
Features
The worktable is rotatable and equipped with horizontal and lifting mechanisms for inclined planning which enlarges its using scope.
It is convenient to adjust feedings and change tool paths by adopting a cam mechanism as a feeding system.
The machine has protections inside the tool path system against overloading due to the careless operation or external influences.
The blade will slide automatically, and non-destructive parts will work to ensure the normal operation of the machine.
The ram, rail bed, speeding gear, and major sliding guide are all lubricated by the oil pump.
The machine adopts a parking brake mechanism; therefore, it is unnecessary to cut off electric power when changing speed, starting, and stopping the machine.
Description
TAB-ECP10 eccentric press is a suitable open type of crank press featuring a left and right open type machine body (i.e., a C-shaped machine body). Its steel plate welded body has a high shock-absorbing performance. Its novel overall design gives the machine an elegant appearance. Its throat has a certain depth. The compact structure makes the use convenient and operation safe. The punch press is equipped with a turn-key rigid clutch, a cam band brake, and a press-down type safety device. Its working table is open on three sides, so the mold loading and unloading, and operation are convenient. The punch press is widely used because it provides good conditions for mechanization and automation. And as the main equipment for plate punching production, the punch press can be used for punching holes, blanking, trimming, bending, shallow stretching, and forming.
Descriptions
Round bending machine both Vertical and horizontal bending
Features:
Horizontal and vertical operation
With standard foot pedal
Special cast frame+
Shafts are hardened with special steel material
Rollers are special steel material hardened and grounded
Gears Milled with full material
Content
Model
SPL800
Swing over bed
800mm
Swing over cross slide
570mm
Swing in gap
1035mm
Length of gap
400 mm
Distance between center
1500/2000/3000mm
Center height
330mm
Width of bed
400mm
Spindle hole
105mm
Max. section of tool
25×25mm
Max travel of cross slide
368/420mm
Max. travel of compound rest
230mm
Spindle bore
105mm
Spindle nose
D1-8
Taper of Spindle bore
113mm(1:20)/MT5
Spindle speed step
16
Range of spindle speed
26~1700rpm
Leadscrew pitch
40mm*2 T.P.I or 40mm *12mm
Inch threads range
7/16~80T.P.I(54 kinds)
Metric threads range
0.45~120mm(54 kinds)
Diamerical pitches range
7/8 ~ 160DP(42kinds)
Module pitches range
0.25 ~60MP(46kinds)
Tailstock sleeve taper/diameter/travel
MT5/90/235mm
Main drive motor:
7.5 KW(10HP)
Rapid traverse motor
250W
Coolant pump motor
0.09KW(1/8HP)
Cross feeds range in metric lead screw
0.044 ~1.48/rev(25 kinds)
Longitudinal feeds range in metric lead screw
0.022 ~0.74mm/rev(25 kinds)
Overall dimension(L*W*H)
3207/3707/4707×1230×1600mm
Packing size(L*W*H)
3270/3770/4770×1135×1840mm
Net Weight
3100/3400/3850kg
Gross Weight
3550/3900/4400kgs
Model no
SP-8001
Material
Metal plate
Painting
High-quality paint
Color
Blue
Max rivet force
60KN(6T)
Working air pressure
0.5-0.8Mpa (Adjustable)
Suitable rivet diameter
10mm
Stroke of the riveter
40mm
Height adjust distance of the shoe iron bracket
20mm
Packing sizes
N.W: 69KG
G.W: 101KG
580×540×1440mm
Model
Unit
TAB-ECP6.3
Nominal Pressure
kn
63
Travel of slip block
mm
40
Frequency of travel
Frequency/minute
50
Enclosed height
mm
70
Maximum adjustment of enclosed height
mm
30
Distance from center of slip block to press body
mm
190
Size of shank holes diameter
mm
70
Bolster Surface
Front to Rear
mm
200
Left to Right
mm
340
Size of shank holes depth
mm
70
Distance between columns
mm
120
Thickness of plate of workbench
mm
30
Mold Height
mm
190
Maximum tilt angle of press body
degree
20
Motor Power
kw
0.75
Overall Dimension
F.B.
mm
400
L.R.
mm
500
Height
mm
1300
model
TAB-S6066
Maximum cutting length(mm)
660
Maximum distance from ram bottom to table surface(mm)
113mm(1:20)/MT5
