| Description | Descriptions
This brand new Variable Speed Belt Grinder Machine is an ideal machine for stock removal, profiling, handles and finish work, satin or mirror finish. It is all steel construction, and all steel frame is welded at all joints that make this sander very solid and precise belt control. Besides, it runs smoothly and the tracking is very stable so it will not make a lot of noise. The drive will convert 1 phase into 3 phases, allowing for greater control when doing detail work and reducing heat after blades are heat treated. This grinder has top-of-the-line idlers wheels,motor & drive.
| Descriptions:
Vacuum tester is a portable device for measuring the vacuum which is mainly used to test the seal level of the engine valve and valve seat before or after rebuilding the cylinder head. It can be also applied to test other vacuum purposes. | Descriptions
- The universal dividing heads models UDH80, UDH100, UDH125, and UDH160 respectively have the center height of 80mm, 100mm, 125mm, and 160mm and are the most important attachment for milling machines. With the help of the dividing head, the workpiece held between centers, or on a chuck can be rotated to any angle as desired and the periphery of a workpiece can be divided into any number of divisions equally. By means of all kinds of cutters, the dividing head can also help the milling machine to perform the milling operation for flute, spur gear, spiral gear, spiral flute, Archimedean cam, helical flute, etc.
- The dividing head is equipped with a face plate and then can be mounted onto the spindle nose. The workpiece can be mounted on the face plate; thus the cutting can be carried out from all sides of the workpiece. UDH125 and UDH160 models dividing heads are designed with improved shafts for supporting heavy loads.
- The universal dividing heads of models UDH100, UDH125, and UDH160 are in the same structures as the UDH80 model dividing heads, and the operation handle is located on the left.
| Descriptions
Heavy-duty arbor press designed for garage and workshop. These arbor presses are small and hand-operated, typically used to perform small tasks, such as staking, riveting, installing, configuring, and removing bearings and other press fit work. | Descriptions
This grinder has special equipment for regrinding rod big end composition surface.
Features:
- Diameter of the grinding wheel: 150mm
- Dimension of revolution worktable: 120mm× 180mm (long× Wide)
- Max moving of revolution worktable: 22mm
| Descriptions:
Heavy-duty arbor press designed for garage and workshop. These arbor presses are small and hand-operated, typically used to perform small tasks, such as staking, riveting, installing, configuring, and removing bearings and other press fit work. |
| Content |
| Model |
Belt Sander Machine Combo 3IN1 2"×82"Belt |
| Rubber Contact Wheel |
Ph427 × 12" |
| Rotating Speed |
0-2800r/min |
| Aluminum Flat Platen (Big Wheels) |
2.5" × 2.5" |
| Motor |
220V, 2 Hp/ 1.5KW |
| Variable Speed |
1 Phase Into 3 Phase |
| Belt |
2"×82" |
| Aluminum Contact Wheels |
2.5" × 2" |
| Aluminum Tracking Wheel |
4" × 2" |
| Aluminum Drive Wheel |
4" × 2" |
| Toothed Rubber Tire |
12'' / 300mm |
| Concare Wheel Diameter |
1'' / 25mm Diameter And 1.6'' / 40mm Diameter |
|
| Model |
Vaccum Tester |
| Power supply |
220V/1PH |
| Power |
100W |
| Output |
60HZ-45L/Min |
| Vacuum Level |
900mbar |
|
| Model |
UDH80 |
UDH100 |
UDH125 |
UDH160 |
| Center height (Millimeter) |
80 |
100 |
125 |
160 |
| Morse taper of spindle (Morse) |
3 |
3 |
4 |
4 |
| Diameter of spindle (Millimeter) |
36.541 |
41.275 |
53.975 |
53.975 |
| Worm wheel transmit proportion |
01:40 |
01:40 |
01:40 |
01:40 |
| The angular of spindle rises and falls relative to horizontal |
>95:5 |
>95:5 |
>95:5 |
>95:5 |
| Position width (Millimeter) |
14 |
14 |
18 |
18 |
| Dividing accuration (Minute) |
60 |
45 |
45 |
45 |
| Gross weight (Kg) |
40 |
80 |
132 |
140 |
|
| Model |
Arbor Press 1TON |
| Automation Type |
Manual |
| Working Height |
300 mm |
| Capacity |
1 Ton |
| Dimensions |
24.5 x 11.5 x 30 cm |
| Model No |
1 TON |
| Weight |
13 Kilograms |
| |
| Model |
Arbor Press 3TON |
| Automation Type |
Manual |
| Working Height |
570 mm |
| Capacity |
3 Ton |
| Dimensions |
46 x 19.7 x 57 cm |
| Model No |
3 TON |
| Weight |
42 Kilograms |
|
