| Description | Description:
DC12 Mobile hydraulic hose crimper is equipped on the vehicle or van, it could service your van battery and offer to crimp
service and repair your hydraulic hoses portable and flexible.
With a big hydraulic cylinder, Our DC12 workshop hose crimper could crimp up to 2 inches.
With the quick change tool, the DC model will release your hands and improve your crimping efficiency and performance.
Could be moved very easily and work under circumstances without electricity. | Description
TAB-BS2240 High-Quality Horizontal metal cutting bandsaw is one of our most economic and durable horizontal metal cutting bandsaw machine
Features:
- The maximum processing capability of BAND SAW is 9"(229mm)
- High-capacity due to controlled by motor
- Can rotate from 0° to 45°
- Has the advantage of quickly clamping.
- Features a belt driven and has four cutting speeds.
- The falling speed of the saw bow is controlled by a hydraulic cylinder
- With a power break protection device, the machine will power off automatically when the rear protective cover is opened
- With coolant system, can prolong the service life of the saw blade and improve the precision of the workpiece
- Has a block feeder (with fixed sawing length)
| Description
TAB-ECP80 eccentric press is a suitable open type of crank press featuring a left and right open type machine body (i.e., a C-shaped machine body). Its steel plate welded body has a high shock-absorbing performance. Its novel overall design gives the machine an elegant appearance. Its throat has a certain depth. The compact structure makes the use convenient and operation safe. The punch press is equipped with a turn-key rigid clutch, a cam band brake, and a press-down type safety device. Its working table is open on three sides, so the mold loading and unloading, and operation are convenient. The punch press is widely used because it provides good conditions for mechanization and automation. And as the main equipment for plate punching production, the punch press can be used for punching holes, blanking, trimming, bending, shallow stretching, and forming. | Description:
TAB LM770 Conventional lathe is with a swing of 770mm for Medium industrial, the motor power is 7.5kw.
Features:
- Precision ground and hardened bed ways.
- The spindle is supported with precision roller bearings. The spindle system is high in rigidity and accuracy.
- An automatic stopping device is used to realize an automatic stop for machining a workpiece of a certain length.
- Easy operating speed change levers.
- Removable gap is provided for more significant diameter work.
| Description
TAB-ECP25 eccentric press is a suitable open type of crank press featuring a left and right open type machine body (i.e., a C-shaped machine body). Its steel plate welded body has a high shock-absorbing performance. Its novel overall design gives the machine an elegant appearance. Its throat has a certain depth. The compact structure makes the use convenient and operation safe. The punch press is equipped with a turn-key rigid clutch, a cam band brake, and a press-down type safety device. Its working table is open on three sides, so the mold loading and unloading, and operation are convenient. The punch press is widely used because it provides good conditions for mechanization and automation. And as the main equipment for plate punching production, the punch press can be used for punching holes, blanking, trimming, bending, shallow stretching, and forming. | Descriptions
Round bending machine both Vertical and horizontal bending
Features:
- Horizontal and vertical operation
- With standard foot pedal
- Special cast frame+
- Shafts are hardened with special steel material
- Rollers are special steel material hardened and grounded
- Gears Milled with full material
|
| Content |
| MOBILE VEHICLE CRIMPING MACHINE 12 VOLT |
| Crimping Range |
6mm to 51mm(1/4" to 2") |
| Quantity of dies |
10 Sets |
| Accuracy |
0.01mm |
| Work efficiency |
200pcs/h |
| System Pressure |
20Mpa |
| Dies sets |
10 sets |
| The max open tolerance |
±30mm |
| Crimping force |
300T |
| Output volume of pump |
4L |
| Voltage |
12v |
| Motor power |
3.6kw |
| Machine Dimension |
750×700×700mm |
| Net Weight |
180kg |
|
| Model |
BS2240 |
| Cutting Capacity (mm) |
Round●220 |
| Square■400W x 100H |
| Blade speed (mm/min ) - 21/34/43/60 |
| Blade Size (mm) |
27x0.9x3330 |
| Main Motor (kW) |
1.5 |
| Water pump Motor (w) |
60 |
| Feeding Speed |
Stepless |
| Workpiece clamping |
Manual |
| Blade Tensioning |
Manual |
| Main Drive |
Wormwheel Drive |
| Table height (mm) |
300 |
| Size outward (mm) |
1750×780×1130 |
|
| Model |
Unit |
TAB-ECP80 |
| Nominal Pressure |
kn |
800 |
| Travel of slip block |
mm |
120 |
| Frequency of travel |
Frequency/minute |
40 |
| Enclosed height |
mm |
70 |
| Maximum adjustment of enclosed height |
mm |
60 |
| Distance from center of slip block to press body |
mm |
90 |
| Size of shank holes diameter |
mm |
60 |
| Bolster Surface |
Front to Rear |
mm |
480 |
| Left to Right |
mm |
750 |
| Size of shank holes depth |
mm |
70 |
| Distance between columns |
mm |
300 |
| Mold Height |
mm |
250 |
| Motor Power |
kw |
5.5 |
| Overall Dimensions |
F.R. |
mm |
1790 |
| L.R. |
mm |
1420 |
| Height |
mm |
2550 |
|
| MODEL |
TAB-LM770 |
| CAPACITY |
| Max. swing over bed |
Ф770mm |
| Max. swing over carriage |
Ф575mm |
| Max. swing over gap |
Ф1050mm |
| Bed width |
405mm |
| Effective length of gap |
230mm |
| Distance between centers |
1000/1500/2000/3000mm |
| Max turning length |
830/1330/1830/2830mm |
| SPINDLE |
| Spindle nose |
D8 |
| Spindle bore |
Ф105mm |
| Taper bore of spindle |
Ф113mm 1:20 |
| Steps of spindle speed |
12 |
| Range of spindle speed |
36~1600rpm |
| FEED |
| Range of longitudinal feeds |
0.063~2.52 (0.023″~0.937″)mm |
| Range of cross feeds |
0.027~1.07(0.010″~0.404″)mm |
| RAPID TRAVEL |
| Longitudinal |
4500mm/min |
| Cross |
1900mm/min |
| THREAD RANGE/ NUMBER |
| Metric pitch threads |
1~14mm/ 22 |
| Whit-worth threads |
28~2TPI/ 26 |
|
| Model |
Unit |
TAB-ECP25 |
| Nominal Pressure |
kn |
250 |
| Travel of slip block |
mm |
70 |
| Frequency of travel |
Frequency/minute |
40 |
| Enclosed height |
mm |
70 |
| Maximum adjustment of enclosed height |
mm |
60 |
| Distance from center of slip block to press body |
mm |
180 |
| Size of shank holes diameter |
mm |
40 |
| Bolster Surface |
Front to Rear |
mm |
520 |
| Left to Right |
mm |
330 |
| Size of shank holes depth |
mm |
60 |
| Distance between Uprights |
mm |
160 |
| Thickness of plate of workbench |
mm |
170 |
| Motor Power |
kw |
2.2 |
| Overall Dimension |
F.B. |
mm |
910 |
| L.R. |
mm |
700 |
| Height |
mm |
1800 |
|
| model |
Pipe Bending Machine RBM40HV |
| Motor power |
1.5 kW |
| Leading roller speed |
9.3 r/min |
| Roller shaft diameter |
40 mm |
| Dimensions machine |
1400×950×1340 mm |
| Net weight |
425 kg |
|
